We are into manufacturing and exporting a superior grade assortment of hydraulic oil cooler and heat exchangers that find application in various engineering industries. These hydraulic oil cooler and exchangers are widely appreciated for its energy efficiency and high performance.

We offer our clients with a specially designed array of flat and pocket jacks that is apt for areas where space is a constraint. These flat jacks find application where no other cylinders fit for lifting, lowering and spreading of structures, bridges and heavy machinery. Complying with the highest quality standards, these flat jacks are known for its following features:

• Compact and Flat design
• Heat treated alloy steel body for durability
• Hard chrome-plated ram for corrosion resistance and resistance to scoring
• Single acting, spring return for smother lowering
• High pressure seals
• Top mounting holes for easy fixturing
• Grooved ram acts as integral saddle
• Wiper to arrest ingress of foreign particles
• Port size: 1/4th" inch or 3/8th" inch NPT
• Quick change coupler with dust cap
• Working Pressure 700 Bar

We have in store for our clients, a qualitative range of low height jacks that is used for lifting, lowering and spreading of structures, bridges, cranes and heavy machinery in various industries. The low height of these jacks makes them ideal for fitting in less space

Following are the distinguishing features of our range:

• Compact and Flat design
• Heat treated alloy steel body for durability
• Hard chrome-plated ram for corrosion resistance and resistance to scoring
• Single acting, spring return for smother lowering
• High pressure seals
• Top mounting holes for easy fixturing
• Grooved ram acts as integral saddle
• Wiper to arrest ingress of foreign particles
• Port size: 1/4th" inch or 3/8th" inch NPT
• Quick change coupler with dust cap
• Working Pressure 700 Bar

We bring forth for our clients, an ultra light weight range of hydraulic aluminum jacks that is available in single and double acting versions. These aluminium jacks are fabricated from aluminum alloy that facilitates easy handling even in inaccessible and difficult locations. These aluminium jacks are provided with lifting capacities ranging from 30 tons to 100 tons and strokes up to 1000 mm. The distinguishing features of this range are given below:

• Composite bearing material prevents metal to metal contact in sliding components of inner parts of jacks
• Golden Ring prevents over shoot of ram
• The ring has the capacity to withstand full load
• Handles for safe and non fatigue handling
• Jacks provided with quick change coupler which do not protrude out and causes hindrance while handling at elevated condition
• Replaceable hardened saddles
• Optional feature: Hard anodizing
• Extra features at extra cost:
• Jacks provided with Relief valve
• Hose burst safety valve couplings

We are instrumental in designing and offering an industrially verified range of high pressure hydraulic jack that is ideal for maintenance, positioning, lifting and lowering applications. These jacks utilized in construction sites, mills, railway workshops and power plants for industrial maintenance. The benefits of this range are given below:

• Light weight
• Spring return
• Heat strength
• Heat treated body
• Durable
• Blackodised ram
• Single acting, spring return for smooth lowering
• Threaded ram with mechanical safety lock-nut for sustaining load on lock-nut for longer period
• Adequate gripping by grooved period
• High pressure seals
• Bottom mounting holes for bolting
• Titling saddle available on request
• QCC with dust cap
• Port size: 3/8th" inch NPT
• Working Pressure: 650 bar

We have in store for our clients, a technically upgraded range of plain ram jacks that is widely used at construction sites, mills, railway workshops, power plants and industrial maintenance. These plain ram jack are used for maintenance, positioning bending, pressing, and production applications.

Following are the unique features of these jacks:

• Light weight
• High strength
• Heat treated body
• Longer service life
• Hard chrome-plated ram for resistance against scoring & corrosion
• Single acting, spring return for smooth return
• Wiper for arresting ingress of foreign particles
• Adequate gripping by grooved saddle
• High pressure seals for durability
• Quick change coupler with dust cap
• Mounting holes for easy fixturing
• Bottom mounting holes for bolting
• Optionally available: Collar threading and tilting saddle
• Port size: 3/8" inch NPT
• Working Pressure: 650 bar

We bring forth for our clients, a unique range of heavy duty plain ram jacks that finds extensive application in lifting of girders, building foundations, handling of heavy duty machinery, steel fabrication, ship building and testing of concrete structures. These plain ram jack are subject to customization at the request of our clients and bear the following distinguishing features:

• Light weight
• Remote control
• Plain ram load return
• High pressure hydraulic jack
• High strength
• Heat treated body
• Hard chrome plated ram for scoring resistance and corrosion resistance
• Single acting load return
• High pressure seals for durability
• QCC with dust cap
• Wiper for ingress arrest of foreign particles
• Adequate gripping by grooved saddle
• Port size: 3/8th inch NPT
• QCC for high tonnage jacks to prevent protruding and possible damage while handling
• Working Pressure: 650 bar

Our clients can avail from us, a high grade array of double acting plain ram jack that is used for heavy duty application like lifting, lowering and spreading of structures, bridges and heavy machinery. These plain ram jack are used for providing oil force in both the advance and retraction of ram, in vertical and horizontal position, where cycle time is crucial.

Following are some of the features exhibited by these jacks:

• Light weight
• Plain ram
• Double acting high pressure
• High Strength
• Alloy steel body for durability
• Hard chrome plated ram to resist scoring and corrosion
• For high tonnage jacks, QCC is fitted on a safety manifold block to prevent protruding and possible damage while handling
• High pressure seals
• QCC with dust cap
• Wiper to arrest ingress of foreign particles
• Relief valve in return position prevents accident against over pressure intensification
• Adequate gripping by grooved saddle
• Port size: 3/8th inch NPT
• Working pressure: 650 bar

Optional features:

• High tonnage
• Custom strokes
• Bottom mounting holes
• Collar threading
• Tilting saddle
• Hose burst features

Widely used for lifting girders, building foundations and handling heavy duty machinery, steel fabrication and ship building, our range of heavy duty safety locknut jacks are designed to sustain load safely for extended periods even when pump is disconnected.   These jacks are also used for testing of concrete structures and are widely reckoned in the market for the following features:

• Light weight
• Remote control
• Threaded ram load return
• High pressure hydraulic jack
• High strength
• Heat treated body for durability
• Blackodised ram
• Single acting load return
• Threaded ram with mechanical safety lock-nut to sustain load on lock-nut for longer period
• Adequate gripping by grooved saddle
• High pressure seals
• Bottom mounting holes for bolting
• QCC with dust cap
• Port size: 3/8th inch NPT
• QCC fitted on safety manifold block for high tonnage jacks and to prevent protruding and possible damage while handling
• Working Pressure: 650 bar

Optional features:

• High tonnage
• Custom strokes
• Tilting saddle

We have in store for our clients, a qualitative range of center hole single acting jack that is provided with different types of puller attachments for easy operation. These jacks find application in pulling, pushing and tensioning of cables and pre-stressing in civil engineering works.

The salient features of these jacks are cited below:

• Light weight
• Remote control
• Plain ram
• Centre hole spring return
• High strength
• Heat treated body
• Hard chrome plated ram to resist scoring and corrosion
• Single acting spring return for smooth lowering
• Wiper to arrest ingress of foreign particles
• Bigger center hole for running screws/cables/studs to pull or push forces
• High pressure seals
• Quick change coupler with dust cap
• Bottom mounting holes for fixturing
• Port size: 3/8th inch NPT

We are instrumental in the development of a quality range of machine lifts that is used for convenient movement of heavy duty machines like transformers, structural equipment & oil rigging machines. Solving the lifting problems in industries, these hydraulic toe-jacks are provided with a toe height of minimum 1" and capacity 5-20 tons making them applicable in multiple jacking systems with the help of single hand pump. These lifts hold the following features:

• High strength
• Heat treated alloy steel body for better life
• Hard chrome plated ram to resist scoring and corrosion
• Single acting load return
• Precision machined body for smooth operation
• Wiper to arrest ingress of foreign particles
• Easy adjustable toe fixing positions for different heights and strokes
• Grooved toe for avoiding load slippage
• High pressure long life seals
• Quick change coupler with dust cap
• Advantage to use single or multiple jacks with common pump
• Adjustable legs for extra grip
• Castor wheels for easy mobility in new version.
• Port size: 3/8th inch NPT.
• Working Pressure: 650 bar