Powerzone Engine Oils:

• Formula 20W/40 : These are superior quality Multigrade Engine Oils made from high quality base stocks and additives. These oils meet performance level of API SF / CC, MIL- L- 46152B &1S: 13656- 1993. These oils ensure outstanding performance and in long design period in new generation petrol and diesel engines.

• Formula 15w/40: It is designed for heavy duty diesel engines based on blend of high quality,high viscosity index hydro finished base oils and advanced additive package.These oils are used for all automotive high speed four stroke,supercharged and turbocharged diesel enginewhen below performance levels are recommended. CF-4/CF/SJ,MIL-L-2104E,E2,228.1,TO-2,C-4

• Powerzone Ultra HDZX-40: Powerzone Ultra HDZX-40 are superior quality heavy duty, mono grade engine oils and meets API CD / SC, US Military MIL-L-2104 C and Mack T- 7 engine test requirements. These oils are recommended for heavy commercial vehicles, diesel cars including earthmovers & engines operating on fuels with heavy sulphur content. These oils also provide excellent thermal & oxidation stability.

Powerzone Transformer Oils are widely used in Transformers, oil immersion circuit breakers and switchgears. These oils are widely used in special transformers designed to operate at elevated temperatures and in low maintenance / meintenance- free transformers designed to operate for longer periodsro. These products should not be used where safety specifications require the use of a non- flammable insulating oil.

We serve all major consumers like: State of Electricity Boards, Transformer Manufacturers, giant industries and utilities. Our Transformer Oil is regularly tested at our fully equipped laboratory and is also periodically checked at reputed independent laboratories recognised by the Government and Utilities. Our technical personnel are always eager to advise you on storage, handling servicing, topping and applications.

Properties:

• Good dielectric properties resulting in minimum power loss
• High resistivity gives better insulation values between windings
• High flash point resulting in low evaporation losses due to high thermal stability
• Excellent interfacial tension for quick water separation
• Proven resistance to electrical strength
• High electrical strength
• Low viscosity improves cooling
• Remarkably low sludge & acidity formation in both ageing & oxidation tests gives longer life to oil and equipment during storage and service Transformer Oils are available in a variety of packing options to suit customer needs, like: Drums and Tank Trucks

Powerzone's Light Liquid White Mineral Oil is suitable for Pharmaceutical & Cosmetics for direct and indirect food contact. Applications: I. Pharmaceutical Industry: • Anti foaming for the production of Penicillin • Internal lubricants as laxatives • Additive in the machining of the ingredients for the fabrication of the compressed • Basis for ointments and emollients • Vehicle of transport of medical spray II. Cosmetic Industry: • Preparation of solid and liquid brilliantine • Preparation of detergent creams, cold creams and lotions for beauty • Preparation of hydrated creams • Preparation of bronzed oils • Preparation of the oil for hygiene of children • Preparation of products for make-up III. Chemical Industry: • The inert oils for the fabrications of metallic hydrides and catalysts • Absorbent oils (e.g. in the extraction of the natural essence for perfumeries, the impregnated paper of white oil is used.) IV. Textile Industry: • Oil components for spinning • Oils for weaving and mesh • Lubrication for sewing machine and hosiery

S.No.	Test	Typical Values
1.	Description	Transparent Oily Liquid
2.	Solubility	Insoluble in water & alcohol, soluble in either and chloroform
3.	Density @ 29.5°C, g/ml	0.810 to 0.860
4.	Kinematic Viscosity @ 40°C	7 c St to 60 c St
5.	Cloud Point. °C	Below zero
6.	Pour Point. °C	-9 to -20
7.	Flash Point, °C	150 to 200

Powerzone Hydraulic Oil is a blend of high quality, high viscosity index, hydrofinished mineral paraffinic base oils and suitable anti-wear additives. Applications: • Hydraulic and fluid power transmission systems • Recommended for industrial, marine, static and mobile hydraulic equipment, including construction vehicles, earth moving equipments. Advantages: • Power transmission characteristics • Outstanding anti-wear performance • Excellent thermal and oxidation stability • Excellent water separation and anti-foam properties

ISO Grade Characteristics	22*	32	46	68	100	150	220	Test Method ASTM
Kinematic viscosity @ 40°c, cSt	22	32	46	68	100	120	220	D - 445
Viscosity index (VI)	100	100	95	95	95	95	95	D - 2270
Flash point, °c	180	197	210	219	231	237	243	D - 92
Pour point, °c	-30	-30	-27	-24	-21	-18	-15	D - 97
Density @ 15°c Kg/m	865	870	875	880	885	890	895	D - 1298
Water seperability @ 82 & 60 min, ml Emulsion	-	-	-	-	-	3	3	D - 1401
Water separability @ 54°c, min	40	40	40	60	60	-	-	D - 1401
Copper corrosion	-	-	-	-	Class 1a	-	-	D - 130

Powerzone Heat Transfer Oils (HT Oils) manufactured from an excellent solvent refined and fully hydrofinished paraffinic base oils. This product intended to have superior performance of high oxidation and thermal stability.

Applications: These operate at high temperatures up to 300°C

Advantages:

• High heat transfer coefficient (Excellent heat transferring)
• Reduced deposit formation
• Low volatility (Low vapor pressure)
• High viscosity- temperature dependency
• Excellent oxidation control and deposit control technology
• Excellent thermal efficiency at heat absorption and reduction
• High themal stability provides long term operation, minimising cracking within the fluid which lowers viscosity and flash point
• Volatility control in the fluid as well as minimising vapor pressure at high temperatures
• Optimized flash point and volatility to minimise vapor pressure at elevated temperature

Service Conditions:

• The life of Powerzone HT Oils may differ based on the system designation and operation
• The oil life can increase if the system is well designed and not subjected to abnormal work loads

Typical Characteristics

ISO Grade Characteristics	32 HT-B	Test Method ASTM
Kinematic viscosity @ 40°c, cSt	30	D - 445
Viscosity index (VI)	100	D - 2270
Flash point, °c	210	D- 92
Pour point, °c	-9	D- 97
Density @ 15°c, kg/m3	870	D - 1298
IBP, °c	330	D - 1160

Powerzone Turbine Oil has been specially formulated base on a blend of carefully selected, high quality, high viscosity index, fully refined hydrofinished mineral base oils with selected additives Applications: • Recommended for steam, gas and water turbines which is used in power generation combination cycles and gas transmission pipe lines and so on. Advantages: • Good thermal and oxidation stability • Excellent corrosion and rust protection • Excellent demulsibility, oil release and foam control • Sludge and deposits formation resistance

ISO Grade Characteristics	32	46	68	100	Test Method ASTM
Kinematic viscosity @ 40°c, cSt	32	46	68	100	D - 445
Viscosity index (VI)	100	95	95	95	D - 2270
Flash point, °c	197	210	219	231	D - 92
Pour point, °c	-9	-9	-6	-6	D - 97
Density @ 15°c Kg/m3	870	875	880	885	D - 1298
Foaming characteristics, ml Seq. I @24°c Seq. II @93.5°c Seq. III @ 24°c	50/0 50/0 50/0	50/0 50/0 50/0	50/0 50/0 50/0	50/0 50/0 50/0	D - 892
Acid number, mg KOH/g	0.1	0.1	0.1	0.1	D - 664
Water separability @ 54°c 30 min, ml Emulsion	3	3	3	-	D - 1401
Water separability @ 82°c 60 min, ml Emulsion	-	-	-	3	D - 1401

Powerzone R.P.O are rich aromatic by products from solvent extracting process to modify physical properties of the vulcanization and to reduce the cost of the finished product.

Applications: as component in rubber formulations and manufacturing of products such as automobile tiers, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacture of adhesives,sealants,polishes and carbon black.

Advantages:

• Low Staining
• Low Volatility
• Low Solubility properties
• Elastomer compatibility Also available are R.P.O light and Medium

Powerzone Gear Oils are extreme pressure type industrial gear oils formulated fm high quality mineral oils and sulphur phosphorous type additive package, which impart excellent antiwar and extreme pressure properties. They have excellent thermal and oxidation stability, good demulsibility and de foaming qualities with rust and metal deactivators. Performance Standards: IS 10552­ 1983 and Vickers V: 104 deg C vane pump test.

Powerzone MF Oil, manufactured based on a blend of paraffinic mineral base oils plus suitable additives to provide reliable properties for the recommended applications.

Applications: As an emulsion lubricant and coolant suitable for application in most type of machining and metal working operations.

Advantages:

• Mixed readily with water to form stable emulsions
• Good rust preventive and anti-foam properties
• Formulated to effectively remove heat from metalworking operation
• Emulsion resistant to freezing and additive separation
• Protection against bacterial growth and deterioration
• Low- staining characteristics

Preparation: Soluble oils are prepared for use by mixing them with relatively large portions of water. The oils must always be added to the water. Never add the water to the oil. Usually one part oil is stirred into four parts water. Adding water to this mixture then makes the desired dilution. Oil should never be added directly to the existing emulsion. For best emulsion stability, rust and bacterial growth protection, low hardness water should be used to prepare emulsions. It is important that the correct oil-water proportions be maintained in service.

Evaporation in the water, which is espacially rapid inmachining operations that developed high temperatures, may enrich the emulsion excessively. Conversely, finely divided prticles carried away by the emulsion may, when filtered out, remove more oil form the emulsion than water and thus make the emulsion leaner. Oil concentration should be checked at any time. With the oil separated from the water, its concentration can easily be observed and corrected as necessary by adding an emulsion with definite concentration. Avoid strong suitable oils below freezing temperatures. If freezing should occur, re-warm to room temperature and mix product well before using.

We are involved in manufacturing and supply of superior quality viscosity improver, that find usages in diverse industries. Our range is accurately formulated using corrosion inhibitor, cross linked acrylic emulsion co-polymer and other materials.

The emulsions used in this improver is diluted with water and neutralized with a base to swell perfectly. Through these processing, the emulsions become extremely viscous. Complying the set industrial benchmarks, our viscosity improver is available in proper packaging for its safe delivery to our clients.

Residue wax are by products from solvent dewaxing process,provide a broad range of melting points and physical and performance characteristics that are suitable for use in various products and process applications.

Applications: This product is used as blending components or waterproofing agents in the manufacture of various industrial products such as candles, polishes, matches, inks, carbon paper and externally can be applied as good dust suppressants or controlled-release agents agents for various chemical and fertilizers.

Advantages:

• High paraffin contents
• High Flash points
• Light color and non-staining properties

We are a well established manufacturer and supplier of superior quality grease, which finds application in different industries for making various machines run effectively. Suitable for all synthetic, semi-synthetic & conventional mineral based motors, our grease helps in reducing wear, oil temperature & power consumption. We lay emphasis on the packaging of this grease to maintain its attributes for long period of time.