Voltage Regulators

Offering different Voltage Regulators with various specifications..

Digital Servo Voltage Stabilizer Control Card, Digital Servo Voltage Control Module is equipped with an advanced Microcontroller Technology with self-controllable Design. It requires minimum external wiring for fast production of Servo Voltage Stabilizers.

The Main Features:
Display Module: To display the input and output voltages simultaneously.
Protection: The output voltage is disconnected, incase the feedback to the control card is disconnected or loose connected.

Programming: The Stabilizer Control Card can be programmed for the below parameters:

Low voltage cut off set Display shows-Lo

High voltage cut off set Display shows-Hi

Time delay relay set (TDR) Display shows-tdr

Hysteresis Display shows-HYS

Low Voltage cut off:
This value can be changed from 160V to 210V. Whenever there is any fluctuation present in the power supply to the extent that output voltage has turned out to be below this set voltage range then relay switches OFF.

High Voltage cut off:
This value can be changed from 220V to 254V. Whenever there is any fluctuation present in the power supply to the extent that output voltage has turned out to be above this set voltage range then relay switches OFF.

Time Delay Relay:
This value can be programmed from 15 sec to 180 sec. Whenever the output voltage goes beyond the low and high voltage range, the relay switches off. When the output voltage has reached in this range and now this much time (which has been programmed in TDR) is introduced and after this the relay turns ON.

We are engaged in providing Voltage Regulation Systems, Digital Automatic Voltage Regulating Relay, Digital Automatic Voltage Regulating Relay.

Microcontroller - based LTC Transformer and regulator control provides reliable operation and expanded capabilities.

Interfaces with conversion front panels sized to replace popular industry tapchanger controls.

Serial communication ports with several on board communication protocols.

Two active serial communication ports through RS-232,RS-485, or Fiber Optics.

Field updatable programming

Reverse power detection /operation

Demand matering

Time/date stamping of maximum /minimum system conditions.

Data logging of metered parameters.

Self-test alarm and user-programmable alarm

Line overcurrent tapchange inhibit

Transformer parallelling by circulating current method/external master follower cicultry

LDC with R & X or Z-compression.

Can be configured for various tap position ranges.

Definite or inverse Time Delay

Voltage limits with automatic runback, tap position limits.

Both 50 & 60 Hz models available

UL Listed.