We offer california bearing ratio (CBR) apparatus for our clients. These apparatus are designed from specifications of the California State Highway Department. Precision made, these products are used for determining the bearing ratio of soil. The other functions of these CBR apparatus include covering the evaluation of the relative quality of sub grade soils and also keeping a check on bearing value of soil.

Our range of Slump Test Apparatus are designed and manufactured at state-of-the-art manufacturing unit. Determining the consistency of concrete, these apparatus are largely used for determination of workability on fresh concrete. The slump test is carried out by filling the slump cone with freshly mixed concrete which is then tampered with a steel tamping rod in three to four layers and after removing the mould vertically upwards, the amount of slump which occurs immediately can be measured accordingly. The complete set comprises of:m • A slump cone with handles made of mild steel sheet nicely painted • Tamping rod, long rounded off at one end • A scale marked on it • A mild steel base plate with a carrying handle.

We bring for our clients Marshall stability test apparatus. These apparatus are reliable for conducting Marshall stability test. The stability test of cylindrical specimen of bituminous paving mixture is the most frequently used by highway departments, contractors, engineers and testing laboratories. Through this test, we are capable of measuring the resistance to plastic flow of cylindrical specimen of bituminous paving mixture loaded on the later surface for use with the hot mixture containing asphalt or tar. Our Marshall stability test apparatus consists of: • A loading unit motorized, capacity 5000kgf with two pillars and an adjustable cross head. • High quality compaction pedal with specimen mould holder. • Two compaction rammers, 4.5kg weight and free fall 45.7cm. • One breaking head assembly with provision to fix flow meter. • Three specimen mould 10.16cm I.D. x 7.6cm high with base plate and extension collar. • One kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate.

Our range of rapid moisture meter are well designed and made to determine the moisture content of soil, sand and other fine grained material with full accuracy. These products are being largely used in the construction industry. Capable of yielding accurate results, these rapid moisture meter are apt for measuring the moisture for determining the moisture level in soils.

Our range of Test Sieves are made of superior quality of frames that guarantees for consistency, fit and function from one end of the sieve to the other. This test sieve is used for various applications like grading of different type of soil, building materials. Our test sieves are of premium quality.

Designed to meet the need for simple, economic & reliable means to test concrete cube and concrete Cylinders for its compressive strength, we have for our clients our compression testing machines. Emphasizing on the simplicity of design as well as construction, these machines are largely demanded in the global arena. Easy to use and operation, these compression testing machines can be availed in different capacities and are ideally suited. The superior design of our Compression Testing Machines helps in permitting testing of concrete cubes & concrete cylindrical samples.

We have for our clients our vibrating machines that are mould vibrator or mortar cube vibrator manufactured from IS – 4031-1968. These machines are used for 2.78” (70.6 mm) mortar cubes and are fitted with ½ H.P. electric motor having 2850 r.p.m. coupled to give 12000 ±400 vibrations per min. The vibrating machines are suitable for operation on 220/230 volts, single phase, 50 cycles A.C. supply. Our vibrating machines come complete with one 2.78” (70.6mm) Cube Moulds and timer range: 1-15 mts. for use.

We offer our clients with our wide range of cube moulds that are high quality moulds. The oth er moulds offered by us are beam moulds, cylindrical moulds, shrinkage bar moulds & prism moulds. Superiro in quality, these cube moulds and the other moulds can be availed in different sizes and are made according to Indian quality standards.

A quality conscious firm, we are engaged in offering superior quality bitumen testing equipment. The Bitumen extractors available with us are one of the most reliable apparatus used by highway departments, contractors, engineers and testing laboratories. The different applications where our Bitumen extractors are used are: • Sampling • Penetro-meters • Flow cups • Bitumen flow • Softening point • Ductility • Road surfacing testing

The jaw crushers offered by us are trusted for their efficiency. These crushers are used for crushing chemical lumps, mineral, aggregate. These products come with heat-treated steel jaws having opening adjustable from 25mm to 6mm. Made of steel, these jaw crushers have forward and downwards strokes with sufficient rocking action to throw the crushed material down to the jaws. These jaw crushers are available with a hopper that is provided at the top for pouring material. The output depends upon the type of material to be crushed and varies from material to material. The crusher is supplied complete with 3 H.P. motor, triple V-belt pulley drive and mounting frame. These jaw crushers are suitable for operation on 3 phase, 50 cycles, 440 volts AC supply.

We have our fluculator jar testing or multiple spindle stirrer that are used for uniform stirring of up to six samples simultaneously. These products are designed for flock formation tests in water treatment plants with variable speed 20 to 100 RPM fractional HP variable speed Motor with gear train. The entire unit is mounted on M.S. housing supported by 9 – ½ ”above bench on for posts. Stainless Steel stirring paddles 1 x 3 inches are attached to rod 10 – ¼” long x ¼ ”diameter with lifting knob at top. Locking collars on stirring rods permit adjustment of paddles height spacing of 6” between rods permit use of 100 ml. beakers, which rest directly on bench with ON/OFF switch. Our unit is suitable for operation on 220 volts, 50 cycles, A.C. Supply and are also supplied with two, four, or six stirrers of 1 liter & 2 liters capacity.

Our range of electric agate pestle and mortar. These products are used for unattended grinding of materials which are not gummy or fibrous. These instruments are extensively used for preparing coal samples for calorific tests. The mortar used revolves whereas the pestle moves back and forth in a pattern thus reaching all parts of Mortar. Its metallic housing with a FHP detachable turn table of cast aluminum, has adjustable post to hold mortar 75 to 135 mm diameter arm of pestle driving mechanism has hinged weighted head which can be raised to inspect or remove sample, additional weights may be added to the head. These products are offered with in built timer that helps in permitting selection of grinding operation upto 60 mts. These timer come with 'Hold’ position that are used for continuous as well as untimed operations. Assortment of scrappers for mortar permits selection accordingly to sample to minimize contamination. We offer a set of agate pestle mortar 75mm diameter with cord and plug for 220 volts 50 cycle AC supply.