We are engaged in supplying playground flooring which is known for its effectual functioning among our valued clients. It is carefully designed for minimizing the risk of injury for the little children. Our procured range is made from high grade of recycled tyre and rubber. Furthermore, it is manufactured in accordance with necessary specifications and can be delivered within stipulated time frame.

We offer recreational flooring which is highly appreciated for its durability and weather resistant features. It is extensively used in jogging paths and pool surroundings. Moreover, it is fabricated in compliance of required standards and can be delivered on time. Below mentioned are its salient features:

• Durable & UV stable
  
• Attractive design
  
• Comfortable to work & stand on
  
• Virtually nil maintenance
  

We offer wet pour installation which is known for its effective functioning among our valued clients. It is widely used in hotels, water parks and more. Moreover, our range is sourced from reliable vendors and can be delivered on time. Following are its noteworthy features:

• Attractive design
  
• Slip resistant
  
• Recyclable
  

We provide qualitative range of grass infill / synthetic grass turf, which possesses peroxide cured system and is free from aromatic, sulphur and zinc. Our sourced range is manufactured in accordance with FIFA requirements. It is available in 9 colors and in sizes ranging from 1-4mm. Following are its noteworthy features:

• Consistency in product properties
• Cheaper than EPDM Granules
• Higher Specific gravity
• Can be used alone without silica sand
• Excellent Rebound Resilience

Below mentioned are its specifications:

• Dark Green (11), Beige (12) and Grey (13)
• Size in 0.5-2.5mm and 1-3mm

We offer game courts which are known for its effective functioning among our valued clients. This game court has synthetic turf which also possesses effective drainage system which comes handy during rainfall. The layered infill of sand and flake rubber helps to adjust the firmness of the surface to fit for the game. Moreover, these are supplied in compliance with required standards and can be delivered on time. Below mentioned are its salient features:

• Low maintenance cost
  
• UV resistant
  
• Weather resistant
  

We offer good quality of jogging track which is highly appreciated for environment friendly and low maintenance cost features. These tracks are useful for various activities like athletics, aerobics and more. Further, these are provided in accordance with necessary standards and can be delivered within stipulated time frame.

We supply running track which is highly appreciated among valued clients and are known for its environment friendly features. It is widely used at the race course ground. Furthermore, it is manufactured in accordance with necessary standards and can be delivered within stipulated time frame.

We are engaged in manufacturing rubber granules which are manufactured using the vulcanized rubber scrap by cutting it to granules. The cut granules are then sieved to the specific range of size ranging from 2 to 4 mm. these are extensively used in:

• Underlays for running tracks
  
• Walkways
  

Due to the porus surface the water trickles through thus averting slippery surface in the rainy season.

We provide rubber buffings which are widely used for preparation of the soft ground in the children’s area. For avoiding the children’s injury, their play areas are made using soft material. Hence, it is an appropriate material for the preparation of the soft surface.

Fast Cure Laminating Adhesive ia a solvent-free, unfilled, single component, moisture-curing, fast cure composition based on polyether polyols.

Application :

• The usage rate of the material will be very dependent on the nature and porosity of the surfaces to be bonded. Good bonds can be achieved at a thickness between 50 and 100 micron.
• When used on non-porous substrates coverage will be 10-20 m²/kg.
• Use of a roller is the preferred method of application for maximum coverage.
• Materials to be bonded should be grease, dust and dirt free. Test bonding should always be carried out. This is particularly important with non-porous substrates.
• Sufficient even pressure should be applied to the bonded materials during the curing stage to ensure good adhesion. A period of between 1 and 4 hours will be required dependent on the temperature and the nature of the materials to be bonded.
• FP 1150 should not be applied to wet surfaces (i.e. surfaces where there are visible signs of moisture such as obviously damp patches) but it is not necessary to dry materials that have been stored in good conditions, indoors.
• FP 1150 does not normally require water misting unless two non porous surfaces are to be bonded although water misting is not detrimental to the product and may result in a faster full cure.

Uses:

• FP 1150 is specially formulated to give a relatively low viscosity and a fast cure.
• FP 1150 is used as a laminating adhesive and is particularly suitable for the bonding of paper based materials and can be used on other surfaces such as chipboard, galvanised steel, GRP and other plastics, glass, wood, cork, polyurethane foam, polystyrene and mineral wool.
• FP 1150 is designed to be hand applied by roller, squeegee, scraper etc., but can be applied by mechanical means.

Storage :

• Store in a cool, dry place, indoors and avoid unnecessary opening of containers. Do not add any other materials to this product without written permission from the manufacturer.
• Once opened FP 1150 will start to cure and a skin will form. Partly used containers should be resealed immediately and re-used as quickly as possible.

Used Containers:

Rinse thoroughly with a strong aqueous detergent solution and LEAVE PERMANENTLY OPEN. The reaction of isocyanates with water leads to the formation of carbon dioxide, which can result in pressure build-up in closed containers. This treatment converts any liquid residue into an inert solid. It is advisable to superimpose a 'Decontaminated' label after treatment.

Healty & Saftey

The recommendations made in the material safety data sheet (MSDS) for this product should be followed at all times.

Typical Property

S.G.                                     1.1
Appearance                   Clear Brown Liquid
Viscosity@ 25°C               3-4,000 mPas
Flash Point                            >200°C
Storage Stabilit(temperate)       9 months
NCO Value%                               12