Pravasi Industrial Corporation

We provide Cover Profile Web Clean Licker-In Zone For TRUMAC/TRUTZCHLER DK 740 Carding Machine with following specifications:

These are:
3328 81 334 504 - DK 740 Card.


Complete set with (0350 81 221 222)


Foam Rubber Strip - 25 mm X 6.5 mm X 1.135 mm


Single faced adhesive. 4 Nos.

• 3328 81 334 038 special section SP-17 (740 22 721 005)


• 3328 81 334 039 special section SP-18 (740 22 721 006)


• 3328 81 334 040 special section SP-19 (740 22 721 007)


• 3328 81 334 041 special section SP-20 (740 22 721 008)

Terms :
G.S.T., C.S.T. as applicable Packing & Forwarding, Transportation-Extra
(3328 81 334 503)


Cover Profile Web Clean Doffer Zone


Complete set with (0350 81 221 222)


Foam Rubber Strip - 25 mm X 6.5 mm X 1.135 mm


Single faced adhesive. 3 Nos.

• 3328 81 334 042 special section SP-21 (740 22 702 001)


• 3328 81 334 043 special section SP-22 (740 22 702 002)


• 3328 81 334 044 special section SP-23 (740 22 702 003)

All sections are manufactured from specific Aluminium alloys to achieve proper hardness required for good performance & durability. Sections are of good quality, having smooth surface finish, properly hard anodized & Precise in dimensions.

We offer FBK fans to our clients, which can be availed in various specifications.
These FBK fans are made from top grade material and these are known for their superior functionality.

The specifications of FBK fans are given below :

FBK Fan

• 9119 00 001 000 fan for FBK


• 9119 00 001 001 fan casing


• 9119 00 001 002 fan wheel


• 0350 81 887 030 cover CPL

Fan Wheels & Shafts (T.V.Fan)

• 9106 00 000 015 fan for ABC TV 425


• 9106 00 001 015 fan for DEF TV 425


• 9106 00 001 014 shaft TV 425


• 9102 00 102 007 fan wheel 500 dia from ABC


• 9102 00 102 008 fan wheel 500 dia from DEF


• 9101 00 100 002 shaft TV 500


• 9101 00 007 002 duct suction fan TVK 650 ABC


• 9101 00 007 003 duct suction fan TVK 650 DEF


• 9102 00 102 000 fan shaft TVK 650


• 9100 00 140 011 fan rotor (AL) 500 Dia.

* We are also supplying TV 425 & TV 500 Fan Complete with motor.

We offer to our clients Free Wheel Clutch for SME Scutcher with following specifications:

• Free Wheel Clutch. (Scutcher SME)


• Code: 0350 81 760 502
  
  

These Free Wheel Clutch works in one way direction and working as hold back device, i.e back stopping device.

We Manufactured this clutch with at most care using imported sprags / cam.

We are providing Hallow Shaft Technogenerator, which is categirised as follows:

Hubner (Berlin) make D.C. Technogenerator DK - 740, 760, 780, etc. Carding Machine.

• (1360 82 803 520)


• 1361 94 803 520 Carbon Brushes.

Typical applications of Hollow Shaft Technogenerator drives with high demands on speed dynamics, ruggedness and reliability, high accuracy of voltage over the entire speed range. Most essential component in carding machines.

We are manufacturing high quality industrial sprocket, which is devided in two categories, these are as follows:

• Simple Industrial Sprockets,


• Duplex Industrial Sprockets

We are manufcaturing Gear, Pulleys, Timing Pulleys, C.I. Parts, Flange Bearings, Covers, Couplings, Taper lock bushes, Door Locks & Hinges and many other jobs to fulfill your requirements. Our full fledged in house facilities with all inspection requirements ensure products to very high standard of quality and performance.


We are trying to develop & supply all most all spares, big or small mechanical or electrical, nylon or rubber what so ever for Trumac / Trutzschler make blow-room & carding machines.

We are manufacturing Lap spindle, which is available in various sizes. These are as follows:

• 9185 05 805 00 Lap Spindle


• 0350 81 236 200 Protective Sleeve (Long) (9185 00 802 007)


• 9185 81 210 065 Spindle guide sheet (Web Guide Plate).

These Lap spindle is widely used in textile processing machines.

We Provides Push Button Switches (Imported) for DK-740 Carding Machine.


These Button Switches are specified as follows:

• 1361 82 201 093 push button red


• 1361 82 201 094 pPush button green


• 1361 82 201 095 pPush button yellow


• 1361 82 201 065 transparent

We also provide Card Commander Sticker for DK 740 & DK 780 Carding Machines.
Especially manufactured very soft stroke, operating life minimum 1 million time short travel key switches, contact material Ag/Au, terminal suitable for PCB's full/spot illumination used in DK-740 card commander.

We offers a wide range of Sealing Rings.

These Sealing Rings are available in the following catagory such as Felt, Tesa-Moll, Rubber Profile and Felt-Foam Sealings etc with following specifications:

• 0371 81 223 261 - 205*175*14(8 6) sealing ring - CVT Pin Roller


• 0371 81 223 262 - 220*190*14(8 6) sealing ring - CVT wire mounted cylinder
  0371 81 223 207 - 15*14*2010 sealing stips - DK 740, 760, 780, Doffer Roller
  0350 81 223 222 - 25*11*2390 Fel strip - Filter SF 124


• 0350 81 223 251 - 180*150*14(8 6) sealing ring - FBK Pin Roller


• 0350 81 223 254 - 105*75*14(8 6) sealing ring - Stripping Roll DK 760, 780
  0350 81 223 257 - 225*195*14(8 6) sealing ring - Lickerin roller DK 760, 780


• Squeeze Roll / Doffer Cleaning Roll


• 0350 81 221 222 - 25*6.5*1135  Foam Rubber Strip (one side adhevise)- DK-740 Web clean all alluminium profile


• 0350 81 221 225 - 700*19*2  Tesa Moll - MPM, DK - 760,780


• 0350 81 221 230 - 20*15 Foam Rubber Strip - DK - 740, 760, 780


• 0350 81 221 370 Rubber Profile (Gummi) - General


• 0350 81 221 380 Rubber Profile (Gummi) - General


• 0350 81 221 381 Rubber Profile (Gummi) - General


• 0350 81 221 383  Rubber Profile (Gummi) - General


• 0350 81 260 050 - 10mm*3mm Tesa Moll - In all ducting assemblies and many more.

With comprehensive under standing of Pin technology we offer the "Total quality controlled" virtually any diameter of pin manufactured to a tolerance 0.01 mm.
Our high carbon & heat treated pins are perfect in length and are long lasting. We make Our spiked pinned bar, spiked, Pinned bar & pins under additional "tempering" quality process in order to add strength to it. Available at competitive rates we have the capability to manufacture them under customized conditions.


We are providing Spiked Bars, which are available in th following category:

• 9528 01 121 002 - FBK - 533 / 529


• 9528 01 121 003 - FBK - 533 / 529


• 9528 42 121 002 - FBK - 533 / 529


• 9528 42 121 003 - FBK - 533 / 529

Our Spiked Bar is categorised as follows: 

• 9023 01 104 024 GBR


• 9023 01 141 004 GBR


• 9023 01 141 005  GBR

Strike Bar - sp - B with pin - 9961 04 114 003 - Feeding Unit be.

Spiked Bar - 9190 04 106 003 - PS - 190 pneumatic feeder.


We are providing Pins also, which are available in th following category:

• FBK spiked bar pin 4*30 - 0350 81 890 028


• Rounded pin 6*53 - 0350 81 780 057


• Rounded pin 8*48 - 0350 81 890 065


• Rounded pin 12*80 - 0350 81 890 102

We are providing Spiked Roller / Pinned Roller, which is Fully Spiked (Pinned) Roller With Oil Splashier For CVT Machine.(Imported).

These Spiked Roller / Pinned Roller are avail in various specifications. These are as follows:

• 0371 81 887 063  CVT 1600mm * 12mm.


• 0371 81 887 062 CVT 1200mm * 12mm.

Spiral Spiked (Pinned) Roller. (Indigenous)

• 9533 42 123 204 FBK Machine.

Fully Spiked (Pinned) Roller. (Indigenous)

• 9533 42 202 204 FBK / DFK Machine.

The smooth rounded shape & sharp point of pin gives excellent penetration & exceptional opening of fiber. The "fiber friendly" pinned roller are now at the vanguard of new generation blow room systems.


*We are also providing reconditioning & repining work for all the rollers.

We engaged in providing Vulkollan Strips which is Importing From Europe.


These Vulkollan Strips can be specified as follows:

• 0350 81 232 373 Size: 58*4*992 - L.V.S.A condensor


• 0350 81 232 380 Size: 70*3*1035 - D.K. 740


• 0350 81 232 370 Size: 56*2*1194 - Axiflow & other vulkollan strips and inserts etc.

High level of physical & chemical properties, good swell resistance & modulus of elasticity, having good thermal stability, its ideal structures ensuring durability and high "Life Expectancy" (Shore hardness 85 to 94 A).