We specialize in the manufacture and installation of a wide range of industrial heating systems that can be customized depending upon the plant setup of client’s infrastructure. These are easy to operate and require low maintenance. Heating systems are manufactured after conducting a thorough survey of the site.

We specialize in the manufacture of precision engineered heating systems in a wide range. These include waste gas boilers that are used to efficiently burn tail gases, waste gas and lean gases that have low calorific value. This process helps in generating steam for co-generation or captive power.

We also offer fired heaters that are widely used in petrochemicals & chemicals, refineries etc. These include reformers, customized charge heaters and start up heaters. Our product gamut also includes solid fuel boilers that provide economical solution for co-generation systems and captive power, and are ideal for waste fuels and biomass. We have the required facilities to manufacture heating systems of any capacity that can be used with any fuel.

Our heat recovery system retains existing heat that leads to reduction in heating costs for the fired equipment. On exhaust gas side the heating surface of the recovery system comes with sufficient margin for fouling. This makes certain that the recovery of heat does not get affected by soot accumulation on the tubes of the system within normal limits. We specifically design heat recovery system for pressure drop according to the source equipments’ maximum permissible back pressure on exhaust gas side. It has connections such as shell, tubesheet, tube bundle, head, gaskets, baffles, mounting etc.

We specialize in the manufacture of precision engineered drying conveyor system in accordance with the exact requirements of the clients. High grade material is utilized to produce technically superior drying conveyor systems.

We manufacture technically accurate steam boilers that are used in various industrial operations. Our vertical steam boilers are very much in demand owing to their easy maintenance and convenient outlets.

• The capacity of the boiler is 30kg/hr to15000 kg/hr.
• It can handle pressure upto 10.54 kg/cm2 and 17 kg/cm2
• Fuel used comprises of wood, coal, lignite, diesel, ldo, fo, bio-mass,husk,bio gas,pet-cook fired, electrical boiler.

We offer thermic fluid heaters that are absolutely corrosion resistant and easy to handle. The best feature of these heaters is that no heat loss occurs because of hot condensate and flash steam. We also have the required facilities to manufacture electrically heated thermal fluid heaters.

• Work temperature can be 300 deg.C standard model, 350 deg.C high temperature models & 400 deg.C vapour design
• Capacity of the heater is upto 30000 kcal/hr 9 million kcal/hr.
• Fuel used comprises of wood, coal, lignite, diesel, ldo, fo, bio-mass, husk, bio gas,pet-cook fired, agro  waste, electrical thermic fluid heater .

We specialize in the production of direct hot air and indirect hot air type generators that are rugged in construction. We also offer electrically heated generators that are fully automatic in operation. These have low heat release rate and consume less fuel.

• Capacity available ranges from 3000kcal/hr to 4 million kcal/hr.
• Work temperature 400C to 9500C for hot air generator, 138 deg. C for pressurized hot water generators and 93 deg for normal hot water generator
• Fuel used comprises of wood, coal, lignite, diesel, ldo, fo, bio-mass, husk, bio gas, pet-cook fired, agro waste, electrical hot water / air generator

Our range of furnace burners is rigid and sturdy in construction. These are leak proof and manufactured using high grade material that imparts durability to the burners. We have the required facilities to provide custom design furnace burners that meet clients specifications.

• Fuel used comprises of diesel, ldo, furnece oil, gas, duel fuel
• Capacity ranges from 2.5 kg/hr to 600 kg/hr

Our efficient team of technicians makes optimum use of the available resources. They efficiently perform conversion of fuel input using advanced system. Owing to our in-depth knowledge of fuel input conversion we are successfully catering to the requirements of global industry.

Our range of dimensionally accurate driers includes rotatory driers that minimize the moisture content of the material in very less time by bringing it into direct contact with a heated gas. It comprises of a rotating cylindrical tube that is manufactured suing superior material.

Our wide product includes precision engineers incinerators that can be customized as per clients demands. Clients can also avail incinerator with rotory furnaceace.
We manufacture stationery incinerator that has following features

• Fuel used comprises of hsd [diesel], ldo, fo, gas
• Capacity ranges from 2 kg/hr to 2ton/hr

Our rotory incinerator is available with primary rotory chamber, secondary stationary chamber, dust collector , heat recovery system, smoke washer, id fan, chimney anlong with fd fans and burners with auto control system. The capacity of rotory incinerator ranges from 300kg/hr to 3000 kg/hr.

We offer a comprehensive range of spare for Thermal Heating Systems. Spares for any make and any capacity of

• Steam Boiler
• Thermic Fluid
• Hot Water Generators
• Hot Air Generators
• Incineratros
• Rotory & Stationery Dryers
• Heat Exchangers
• Indian & Imported Burners
• Custaom made Heating Systems

Various Spares we offer are:

Burner	Ignition Electrodes & Transformer
Photocell/ U V Detector	Sequence Controller / Wiring Base
Temp. Indicator & Controller	All Types Of Temp
Sensors Solenoid Valves & Coils	Water Testing Kits
Thermicfluid Pump	Piston Pump And Its Spares
Burner Gun,	Diffuser Plates And Assembly
Metallic Flex-Braided Hoses	Fuel Pump
Fuel Oil Filter Element	Feed Water Pump Suction & Delivery
Hooter/Alaram	Spray Nozzle
Pressure Switch	Graphoile Rings & Gland Rope
Ignition Transformer	Timer, Pressure Gauge
Simplex / Duplex Filter	Boiler Coil
Panel Boards	Heat Exchanger
Water / Oil Immersion Heater	Blower Fan
Edit Move Up Move Down Delet