Parameter	Specification
Orthophosphoric acid, H3PO4, % w/w, min	86
Iron as Fe, ppm, max	10
Calcium as Ca, ppm, max	80
Magnesium as Mg, ppm, max	--
Heavy metals as Pb, ppm, max	10
Chloride as Cl, ppm, max	20
Fluoride as F, ppm, max	100
Sulphate as SO4, ppm, max	300

With chemical formula H3PO4, phosphoric acid is also known as orthophosphoric acid. It is a colourless liquid, which is packed in 50 kg hdpe carbuoys. It has following applications:
• Pre-treatment chemicals for metal surfaces
• Metal anodizing
• Refining of sugar
• Aromatic Chemicals
• Sugar Industries
• Vegetable oil De-gumming
• Manufacture of industrial phosphates

Chemical formula / structure	NaOH
Description	White flakes
Specifications	Sodium Hydroxide (as NaOH) min Sodium Carbonate (as Na2CO3) max	99.50% 0.40%

Reagents	Procedure
1 N HCl	Add 106 ml of 30% distilled/AR grade acid to 894 ml of distilled water. Mix well and keep the solution for some time. Mix again and standardise after 15 minutes Standardization: By means of weighing bottle transfer 1.8 to 2.2 gram of oven dried AR grade Na2CO3 in 250 ml clean glass beaker. Add 50ml of freshly boiled and cold distilled water and dissolve the material by means of glass rod. Titrate this against 1 N HCl to be standardised using ''A'' grade burette and 5 drops of methyle orange indicator Colour changes from yellow to light red. Note down the burette reading (BR)
0.1 N. HCl	Pipette out 50ml of 1 N HCl into 500ml of columerised flask and dilute to 500ml
Phenophthelein	Dissolve 0.1 gram of phenophthalein in 60 ml of ethyle alcohol. Make up the volume to 100ml with distilled water
Methyle Orange	Dissolve 0.1 gram of methyle orange in 100ml of distilled water
Applications	Used in a variety of industries such as
	* Pulp & paper	* Alumina
	* Textiles	* Soaps & Detergents
	* Dyes & Dyestuffs	* Pharmaceuticals
	* Water treatment

Liquid Bromine

Bromine %min 99.9
Relative Density, min 3.12
Chlorine as Cl %max 0.05
Iodine as I, %max 0.0001
Non volatile matter %max 0.01
Sulphate as SO4, %max 0.003
Heavy metals as Pb, %max 0.0002
Water in bottles, %max 0.03
Water in lead lined container, % max
0.005

Application
• Flame Retardants
• Agro chemicals
• Antiknock additives
• Drilling fluids
• Water treatment chemicals
• Drugs and Pharmaceuticals
• Dyes and Dye Intermediates
• Photographic chemicals

Packing
Containerised in glass bottles of 1 litre each. Six bottles form a crate. One twenty feet container carries approx 9 MT.

Soda Ash is the common name for the technical grade of anhydrous Sodium Carbonate (Na2CO3). It is produced in two standard forms - Light and Dense and graded according to its bulk density.

We are concerned about our customers in the various industries ranging from soap, glass, sodium salts and dyes. While the glass industry is the largest consumer of Soda Ash, the demand for Soda Ash from GHCL India, is preferred by detergent companies for its high solubility in hot and cold water. GHCL's Soda Ash is also widely used in the manufacture of sodium salts widely used in food products.

GHCL's premium quality soda ash is characterized by: :
• High solubility in hot and cold water.
• Very low iron.
• Low chloride.
• Whiteness.
• Free flowing.
• Uniform particle size distribution
• Freshly calcined ash that is free from lumps at the time of packing.

No	Characteristic	Grade-->	35% H²0² w/w	50% H202 w/w	60% H202 w/w
1	Stability	**	0.3 max	0.3 max	0.3 max
2	Acidity (as H2SO4)	g/100 ml	0.03 max	0.03 max	0.07 max
3	Non-Volatile residue	g/100 ml	0.15 max	0.2 max	0.2 max
4	Residue on Ignition	g/100 ml	0.05 max	0.05 max	0.05 max
5	Iron (as Fe)	ppm	1.00 max	1.00 max	1.00 max
6	Copper (as Cu)	ppm	0.10 max	0.10 max	0.10 max
7	Arsenic (as As2O3)	ppm	2.0 max	2.0 max	2.0 max
8	Lead (as Pb)	ppm	10.0 max	10.0 max	10.0 max
** - ml. of O2/25 ml at 100oC for 30 minutes
Hydrogen Peroxide (HYP) : H2O2

Applications of Hydrogen peroxide

Applications of Hydrogen peroxide
• As bleaching agent for Pulp, Paper, Textiles, Sugar, Coir & Tobacco Industries.
• Antiseptic agent in Pharmaceuticals
• Sterilizing agent in Aseptic Packing
• As raw material for Organic & Inorganic Chemicals, Dyestuffs & Pesticides.
• Effluent treatment.
• Propellant for Rockets & Aircrafts.
• Oxidising agent for Silver Ornaments.
• Neutralizing agent in Wine Distillation.
• Chemical reagent for extraction of different metals : Cobalt, Uranium, Tungsten etc.
• As an etching & cleaning agent in Electronic Industry and Process Equipments.

VIKRAM SBP is Calcium Hypochlorite containing above 34% Chlorine and is a powerful oxidizing agent. It is stable for a longer period of time i.e. very low losses of available Chlorine over extended period of time, when properly stored even under changing climatic conditions. This is because of low moisture content in the product and absence of heavy metal impurities in the raw material. Above all the best quality Hydrated Lime and the Chlorine generated from its own plant are used in the manufacture of VIKRAM SBP.

Specifications
General Appearance: Dry free flowing white powder, without hard lumps and impurities
Particle Size Minimum 99.5% passing through 1.70 mm IS Sieve or 10 BSS Sieve
Available Chlorine Minimum 34% (by Wt.)
Stability On heating at 100 +/- 2 degree, does not lose more than 1/15th of Av. Cl2
Moisture Maximum 0.3% (by Wt.)

Applications
• As a Disinfectant for water treatment
• As a bleaching agent in textile industry
• As a sanitizer in epidemic control
• In Aqua Culture
• In Carpet Industry
• In Pulp and Paper Industry
• In Health departments, Hotels, Offices, Homes etc.

Packing
25 Kgs - Laminated high-density Polyethylene bags with extra LDPE liner
50 Kgs - New Galvanized Iron Drum resistant to rust and attack by Chlorine with added strength during handling, transportation and storage with extra LDPE inside liner for keeping quality and protection

Specification of GI Drums
External Height of Drum - 450 mm
Internal Height of Drum - 426 mm
Drum Diameter - 406 mm
Weight of Drum - 4.5 Kg.

• In 5 Kgs bag / 1 Kg. pouch ideal for small consumers
• Loadability in 20' container
• 50 Kg Drum Packing - 19.7 MT
• 25 Kg Bag Packing - 21.5 MT

Other Details
• ITC Classification: 28281000
• UN No. 2208
• IMO Classification: 5.1 - Oxidising Substance
• IMDG No. 5138

No	Characteristic	Specifications
1	Potassium Hydroxide (as KOH)	%	87	min.
	(Dry basis)
2	Potassium Carbonate (as K2CO3)	%	0.5	max.
3	Chlorides (as KCL)	ppm	105	max.
4	Iron (as Fe++)	ppm	10	max.
Caution: Harmful to animals and plant tissues, Corrosive

Caustic Potash Flakes is produced from Caustic Potash Lye manufactured by UHDE, Germany's Membrane Cell Technology

Mercury free.

Low iron content.

Potassium Carbonate manufacture

Dye Stuff Industry

Rubber Chemicals

Potassium Permanganate manufacure

Acid Neutralization

Other Potassium based chemicals

Pharmaceutical Industry

GACL guarantees minimum 87% purity of KOH. Caustic potash Flakes is stable even at high temperatures.

QCD is equipped with most modern instruments to analyze special tests also on request.

25/50 kg HDPE bags with inner HM-HDPE liner.

50 Tonnes/day at Vadodara

• 1,4 Dibromo Butane
• Allyl Bromide
• Bromo Acetic Acid
• Hydrobromic Acid (Solaris OB-130)
• Iso Propyl Bromide
• N-butyl Bromide (Solaris OB-110)
• N-propyl Bromide (Solaris OB-100)
• Para Bromo Anisole (Solaris OB-120)
• Para Bromo Phenol
• Para Nitro Benzyl Bromide
• Sodium Bromide
• Stabilized N-Propyl Bromide

Compound Name
Hydrobromic Acid

CAS Number
100035-10-6

Molecular Formula
HBr

Molecular Weight
80.92

Test Specification

Appearance
A clear colorless to yellow liquid

Assay
47% Min

Iron
1.0 ppm Max

Free Bromine
20.0 ppm Max

Colour ,HU
10.0 ppm Max.

Sulphate
20.0 ppm Max.

Chloride
20.0 ppm Max.

Iodide
20.0 ppm Max.

Heavy Metal as Pb
2.0 ppm Max.

Residue on evaporation
0.02 % Max.

Applications
• As brominating agent for manufacture of pharmaceutical dyes , photographic chemicals etc

Packing
300 Kg HM HDPE drums

Chemical formula / structure	H3PO4
Description	Ortho Phosphoric Acid is a clear, colourless liquid.
Applications	• Pre-treatment chemicals for metal surfaces • Metal anodising • Sugar refining • De-gumming of vegetable oils • Manufacture of industrial phosphates • Aromatic Chemicals • Sugar Industries
Packing	• 50 kg hdpe carbuoys. • Tanker load. ( naked )

TECHNICAL SPECIFICATION
• Parameter Specification
• Orthophosphoric acid, H3PO4, % w/w, min 86
• Iron as Fe, ppm, max 10
• Calcium as Ca, ppm, max 80
• Magnesium as Mg, ppm, max --
• Heavy metals as Pb, ppm, max 10
• Chloride as Cl, ppm, max 20
• Fluoride as F, ppm, max 100
• Sulphate as SO4, ppm, max 300.