|
Grinders & Wheels
Ever since inception, we are continuously engaged in providing of a complete range of Grinding Wheels, Depressed Center (DC) grinding wheel/Reinforced Cut Off wheels, & other bonded abrasive products. All our products are offered as per the international quality standards. Some of the showcased products are:
 |
Centreless Wheels Used both in In-feed and Through-feed grinding in nearly all metal working industries like steel & rolling mills, and manufacturing industries like automotive, bearing, bar grinding, dowel pins, fastners and tools.
Available in:
- White Aluminium Oxide
- Pink Aluminium Oxide
- Brown Aluminium Oxide
- Green Silicon Carbide
- Black Silicon Carbide
- Mixture- Brown & White Aluminium Oxide.
Most wheels are wih straight and recessed sides with diameters ranging from 250mm to 600mm and thickness from 25mm to 300mm.
Types
- Straight wheels
- RBS (recessed both sides)
- ROS (recessed one side)
MAnufactured in vitrified and resinoid bond.
|
|
|
|
|
Regulating Wheels Used in Centreless grinding as control wheels. Most wheels are with straight and recessed sides with diameters ranging from 50mm to 400mm and thickness from 25mm to 250mm.
Available in :
Types
- Straight wheels
- RBS (recessed both sides)
- ROS (recessed one side)
|
|
|
|
|
Carbide Grinding Wheels Used for best performance and economy of carbide tool maintenance.
Available in :
- Green Carbide (GC)
- Black Silicon Carbide (C)
- Mixture-Black & Green Silicon Carbide
Recommendations :
- Grit 46 (Coarse)-rough grinding
- Grit 60/80 (Medium)-general
- Grit 80/100/120 (Fine)-sharpening the cutting edge
Types :
Manufactured in vitrified bond.
|
|
|
|
|
Off Hand Grinding Wheels
Suitable for use in bench, pedestal and low speed portable grinding machines. They are available in Aluminium Oxide and the recommendations are as follows:
Grit 24 (Extra Coarse) -For heavy removal of materials
Grit 36 (Coarse) - For rough grinding
Grit 46 (Medium) - For general purpose grinding to achieve acceptable finish
Grit 60/80 (Fine) - For finishing operations
Types Available: Straight Wheels (Type1)
Manufactured in vitrified bond
|
|
|
|
|
Hypodermic Needle Grinding Wheels
Hypodermic Needle Grinding Wheels are made of finest grains and mainly used in grinding the medical needle point. They have a very high strength. The ground needle point has no burrs with good sharpness.
Available in Grit size from 800 to 2000
|
|
|
|
|
Honing & Super Finishing Stones
The grinding of the bore or hole is named as internal grinding wheels and is most difficult grinding. It is recommended that the diameter of the wheels shall be 60-80% of the diameter of the hole of workpieces.
Honing and Super Finishing Stones are used for finishing of internal or external parts of the components such as cylinder heads, bearing rings, bearing races etc. where excellent and accurate finish is required as high as 0.02 um. These are generally done with rectangular or square shapes or special shapes stick or blocks. Super finishing is done in stages. First stones of grit size 400,600 and 800 are used and then finishing is done with stones of grit size 800,1000 and 1200 as per finishing requirement.
Internal Grinding Wheels and Honing & Super Finishing Stones are sometimes treated with Sulphur in order to increase stone life and to prevent loading..
Available in :
Brown Aluminum Oxide
White Aluminum Oxide
Silicone Carbide
Types:
Straight
ROS (Recess One Side)
RBS ( Recess Both Sides)
|
|
|
|
|
|
