Industrial Grinding Wheels

Used both in In-feed and Through-feed grinding in nearly all metal working industries like
steel & rolling mills, and manufacturing industries like automotive, bearing, bar grinding,
dowel pins, fasteners and tools.
Available in-White Aluminium Oxide,Pink Aluminium Oxide,Brown Aluminium,
Oxide Green Silicon Carbide, Black Silicon Carbide Mixture - Brown & White,
Aluminium Oxide
Most wheels are with straight and recessed sides with diameters ranging from 250mm to
600mm and thickness from 25mm to 250mm.
Type-Straight wheels, RBS (recessed both sides) ROS (recessed one side)
Manufactured in vitrified and resinoid bond.

Used for grinding the outside diameter of components revolving between two centres.
Components ground in cylindrical grinders possess better geometrical accuracies and
finish than those in turning operation. Wheels range from 250mm to 900mm in diameter
and from 20mm to 150mm in thickness.

Available In- White Aluminium Oxide
-Pink Aluminium Oxide
-Brown- Aluminium Oxide
-Mixture-Brown & White Aluminium Oxide
-Black Silicon Carbide
-Green Silicon Carbide

Hypodermic Needle Grinding Wheels are made of the finest grains and mainly used for grinding
the medical needle point. They have a very high strength. After grinding, the point has good
sharpness with no burrs.
Super thin cut off wheels are used for cutting of hypodermic needles, watch par ts, exhaust
conver tor tubing and other stainless steel or some nonferrous material. The line speed is up to
60m/s. The finished par ts are precise and free of burrs. Available in thickness of 0.4 and 0.5 mm.

Used in manufacturing various types of crank-shafts for automobile and generator
industries. Most wheels are with straight and recessed sides with diameters ranging
from 600mm to 1200mm and thickness from 20mm to 100mm.

Available in-
Brown Aluminium Oxide, White Aluminium Oxide, Mixture -
Brown & White Aluminium Oxide .

Types -
Straight wheels, RBS (recessed both sides)
Manufactured in vitrified bond.

Sharpening & Polishing stones are widely used to grind and hone the edges of steel
tools and implements. These stones may be flat, for working flat edges, or shaped for
more complex edges such as those associated with some wood carving or wood-turning
tools. These are used either manually or mounted on special purpose grinders.

Combination Sharpening stones, that are coarse on one side and fine on the other, are
the most widely used pr duct in this category. To achieve a clean cutting edge first use
the coarse side on the tool and then sharpen it with the finer side.

Some Typical Applications-
Sharpening of Carpentry Tools, Knives, Blades, Scissors etc.Dies & Mould Polishing, Glass edge shaping &cleaning,Deburring

Roll Grinding is specialized form of cylindrical grinding for precision
grinding of various kinds of rolls. Used both for re-grinding and production
grinding of rolls for Steel, Brass, Copper, Aluminum, Printing Paper and
Textile Industries.

Available in-
Brown Aluminum Oxide, White Aluminum Oxide,
Silicon Carbide
      
 Types - 1-(Straight Wheels), 7-RBS (Recessed Both Side),5-ROS
(Recessed One Side)
Manufactured in Vitrified and Resin Bond.
(A) (WA)

Snagging Wheels-
Used for heavy stock removal in foundries, steel mills,
shipyard, welding shops, metal fabrication etc.

Blade Sharpening Wheels-
Used for surgical blades, kitchen knife and blades
sharpening

Used for surface grinding, they can be made into different shapes as
per requirement.

Available in-
Brown Aluminium Oxide, White Aluminium Oxide,
Pink Aluminium Oxide

Manufactured in a variety of shapes and sizes, as per requirement.
Available in vitrified and resinoid bond.

Internal Grinding Wheels for grinding inside surfaces of bearings, rings,
cylinders, barrels, and bores and auto par ts etc.
The recommended wheel for internal grinding has a diameter up to 2/3 that of
the final bore required.
We offers all sizes up to 6" (150mm) in diameter.