Sulfamic Acid Descalant

Sulfamic Descalant		Specifications
Grades		GP Grade	HP Grade	SP Grade
Product Code		SD – 01	SD – 02	SD - 03
Active		90%	97%	98%
Performance Enhancing chemicals, Percent by mass, max		8%	0.2%	2%
Grade	Key Characterizes
GP Grade	The GP grade may be used for removing scales obtained from water in heating and cooling systems e.g. boilers, heat exchangers, condensers, jackets and coils.
HP Grade	This formulation is recommended for scales containing high silica, Typical examples are scales found in sugar evaporators, caustic evaporators in the aluminium Industry and black liquor evaporators in the Pulp Industry
SP grade	This formulation is recommended for removal of scales from heat exchangers were scales are very severe and hard

Application:

·         As an immersion liquid

·         Filling with a sulfamic acid descalant solution

Through circulation for consistent concentration though the closed circuit

Direction of use:

·         Machines should be rinsed with water to remove loose flakes & sludge's before use

·         Sulfamic acid descalant can be used in cold as well as with temperature ranging from 40º to 60ºC

·         Powder should be added to warm water for an ideal solution

·         The sample should be properly tested before using

·         Proper ventilation is essential during usage of sulfumic descalant

·         After cleansing the solution should be drained out and the system should be rinsed with water until pH value is neutral

We recommend rinsing with ROTO PASS – 212 for better metal prevention and passivation

We provide sulfamic acid descalant that has scale solubilizing capacity and added corrosion resistance blends which offer maximum protection to metal of equipment being cleaned. Our range of sulfamic acid descalant is ideal for removing scales from cooling towers, boilers, heat exchangers, coilers, condensers, and various other heating and cooling systems. We also provide sulfamic acid descalant in self-indicating grade that changes colors to indicate that the efficiency of material has been finished.