 |  |
| Home | Who We Are | What We Offer | Contact Us | Enquiry |
| |
|
Fluid Bed Processo Fluid Bed Granulator Fluid Bed Top Spray |
|
We are manufacturing different types of pharma machinery. Other Information
|
|
The End runner is used for various grind able materials wet type in herbal (ayurvedic) Industries for Mixing (Bhavana Process) liquid extract with herbals powder and super grinding in micron size up to 300 mesh size.
There are two type of (Kharal) Runner, 1) End Runner and 2) Edge runner. The end runner is grinding the material on taper end of roller and edge runner is grinding the material on edge face of roller. The heavy wide rollers ride over the material where intensive crushing, shearing and mixing action takes place. Scrappers and ploughs are provided for directing the mass into the path of the rollers.
The End runner is having centrally drive drums and materials are feed in the drum. In end runner there is rollers contact with rotating drum on taper end point of rollers and the rollers are mounted at out side of the drum and on the machine structure with moveable housing and bushing for roller shaft. Due to friction force the roller is move rotating in vertical axis and move up and down ward in housing assembly when hard materials comes under the roller. The material is a grinding between bottom face of drum and end face of roller and the scrapper are scrap materials continuously and brought under the grinding face. The drum is drives through heavy duty reduction gearbox and motor.
The Edge runner is having fixed drum with centrally drive assembly of roller. There is roller assemblies is drive through reduction gear box and motor to centre shaft, the centre shaft is connected with movable arm and roller are fitted with bearings with the arm assembly. The roller is move round on axis as well as rotates in side the drum. The materials are grinding between edge of roller face and bottom face of the drum and scrapper are scrap materials continuously and brought under the grinding face.
|
|
The End runner is used for various grind able materials wet type in herbal (ayurvedic) Industries for Mixing (Bhavana Process) liquid extract with herbals powder and super grinding in micron size up to 300 mesh size.
There are two type of (Kharal) Runner, 1) End Runner and 2) Edge runner. The end runner is grinding the material on taper end of roller and edge runner is grinding the material on edge face of roller. The heavy wide rollers ride over the material where intensive crushing, shearing and mixing action takes place. Scrappers and ploughs are provided for directing the mass into the path of the rollers.
The End runner is having centrally drive drums and materials are feed in the drum. In end runner there is rollers contact with rotating drum on taper end point of rollers and the rollers are mounted at out side of the drum and on the machine structure with moveable housing and bushing for roller shaft. Due to friction force the roller is move rotating in vertical axis and move up and down ward in housing assembly when hard materials comes under the roller. The material is a grinding between bottom face of drum and end face of roller and the scrapper are scrap materials continuously and brought under the grinding face. The drum is drives through heavy duty reduction gearbox and motor.
The Edge runner is having fixed drum with centrally drive assembly of roller. There is roller assemblies is drive through reduction gear box and motor to centre shaft, the centre shaft is connected with movable arm and roller are fitted with bearings with the arm assembly. The roller is move round on axis as well as rotates in side the drum. The materials are grinding between edge of roller face and bottom face of the drum and scrapper are scrap materials continuously and brought under the grinding face. |
|
A Centrifuge is efficient machine for Liquid Solid separation and centrifugal filtration/ fluid clarification in various industries such as Pharmaceutical, Bulk Drugs, API, Chemical, Textile, Herbal, Oil & Sugar Industries.
The centrifuge is a simple device usually driven by a motor that woks on the principle of sedimentation. Objects in a centrifuge are rotated around a fixed axis, thus applying a force perpendicular to the axis. The sedimentation principle uses the centripetal acceleration to evenly separate substances of varying density. Centrifuges can be divided or categorized on several bases such as manual top discharge, Lifting bag type and reversing filter bags with 3 point or 4 Point suspension.
SALIENT FEATURES
|
|
Item Code: PFBD Fluid bed dryer (fbd) involves drying and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in pharmaceuticals, biotech, nutraceuticals, cosmetic, chemicals, biochemical, food, dairy, confectionery, agrochemical, fertilizer, herbals, pain, ceramics, catalysts industries and so on industries as well as pharma institutes. Prism fluid bed technology offers an effective and efficient method for drying, granulating, coating and agglomerizing. The fluid bed equipment has universal application. You can combine with high shear mixing as a very rapid dryer in combo with suitable nozzle system a combined granulator, dryer and coater. Other Information
|
|
Item Code: PPFBP Fluid Bed Processing involves drying, cooling agglomeration, granulation, pellets and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, Confectionery, Agrochemical, Fertilizer, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Other Information
|
|
Item Code: PPME
Fluid Bed Processing involves drying, cooling, agglomeration, granulation, pellets and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, Confectionery, Agrochemical, Fertilizer, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
· High Mixing Precision, Short Batch Time, Problem free Cleaning and Residue Free Discharge. · Single piece construction & Integrated retarding chamber cum filter bag housing. · Top Spraying system for Granulation. · Wurster Coater- Bottom spraying system for Granules, Pellet & Tablet Coating. · Granulation and Coating system with advance PLC controls system with MMI Touch screen. · Spraying system with atomized spraying gun and high precise flow peristaltic pump. · Sampling pot on product container. · Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube. · Dual speed mixing impeller for mixing and intensify chopper for granulating. · Filtration system comprising of 20 micron washable filter followed by 5 micron prefilter. Finally air is passes through 0.3 micron HEPA Filter. · Inlet Air handler with Air Filter- Micro and HEPA and Heat Exchanger. · Capacities from 15 Kg/Hr to 300 Kg/Hr Industrial Productions. · Design is cGMP – Current Good Manufacturing Practices compliance. · Product contact parts AISI 316/ 316L & non contact parts AISI 304. Other Information
|
|
Item Code: PPMF3 Depending on the application required Prism fluid bed Equipment can be configured into designs as follows:
1. The Fluid Bed Granulator Process: · The Fluid Bed system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. · The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. · The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluid Bed Processor with Top spraying system for Agglomeration and Granulation Process: · The process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. · The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. · The fluidized powder is wetted until liquid bridges are formed between particles. · Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. · Once the granules are made they are dried in the equipment using hot air.
3. Fluid Bed Equipment with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: · This process is used to apply a coating to the granules or pallets. This process knows as wurster coater. · In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. · Then the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. · Once they are outside the wurster compartment, they move downward outside the compartment where they dry another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPMF4 Application & Process: Prism Fluid Bed Top Spray System involves drying, cooling, agglomeration and granulation of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. Depending on the application required Prism Fluid Bed Top Spray System can be configured into designs as follows:
1. The Fluid Bed Top Spray System Mixing and Drying Process: The Fluid Bed Top Spray System have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluid Bed Top Spray System for Agglomeration and Granulation Process: The process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure.
Other Information
|
|
Item Code: PFBP Prism Fluid Bed Processing involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. Depending on the application required Prism fluid bed Equipment can be configured into designs as follows:
This Fluid Bed Bottom Spray System is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPME5 Prism Fluid Bed Equipment Top Spray involves drying, cooling, agglomeration and granulation of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required Prism Fluid Bed Equipment Top Spray can be configured into three designs as follows:
1. The Fluid Bed Mixing and Drying Process: The Fluid Bed Equipment Top Spray system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. Fluid Bed Equipment Top Spray system for Agglomeration and Granulation Process: The Fluid Bed Equipment Top Spray system is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure.
Other Information
|
|
Item Code: PPME4 Prism Fluid Bed Equipment Bottom Spray involves coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. Depending on the application required Prism fluid bed Equipment Bottom Spray can be configured into three designs as follows: Fluid Bed Equipment Bottom Spray with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: This Fluid Bed Equipment Bottom Spray is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPME6 Prism Fluid Bed Equipment Combo Model involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required Prism Fluid Bed Equipment Combo Model can be configured into designs as follows:
1. The Fluid Bed Equipment Combo Model Mixing and Drying Process: The Fluid Bed Equipment Combo Model system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluid Bed Equipment Combo Model with Top spraying system for Agglomeration and Granulation Process: The Fluid Bed Equipment Combo Model is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure.
3. Fluid Bed Equipment Combo Model with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: This Fluid Bed Equipment Combo Model process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPME7 Fluid Bed System involves drying, cooling, agglomeration, granulation, pellets and coating of particulate materials. Depending on the application required Prism fluid bed Equipment can be configured into designs as follows:
1. The Fluid Bed Mixing and Drying Process: · The Fluid Bed system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. · The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. · The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluid Bed Processor with Top spraying system for Agglomeration and Granulation Process: · The process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. · The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. · The fluidized powder is wetted until liquid bridges are formed between particles. · Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. · Once the granules are made they are dried in the equipment using hot air.
3. Fluid Bed Equipment with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: · This process is used to apply a coating to the granules or pallets. This process knows as wurster coater. · In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. · Then the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. · Once they are outside the wurster compartment, they move downward outside the compartment where they dry another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPME8 Prism Fluid Bed System involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required PrismFluid Bed System can be configured into three designs as follows:
1. The Fluid Bed System Mixing and Drying Process: The Fluid Bed System have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluid Bed System with Top spraying system for Agglomeration and Granulation Process: The Fluid Bed System process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure.
3. Fluid Bed System with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: This process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform.
Other Information
|
|
Item Code: PPME9 Prism Fluid Bed Processor Top Spray involves drying, cooling, agglomeration and granulation of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. Depending on the application required Fluid Bed Processor Top Spray can be configured into designs as follows:
1. The Fluid Bed Processor Top Spray Mixing and Drying Process: The Fluid Bed Processor Top Spray system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluid Bed Processor Top Spray with Top spraying system for Agglomeration and Granulation Process: The process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure. Other Information
|
|
Item Code: PPME10 Prism Fluid Bed Processor Granulator involves drying, cooling, agglomeration and granulation of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required Prism Fluid Bed Processor Granulator can be configured into designs as follows:
1. The Fluid Bed Processor Granulator Mixing and Drying Process: The Fluid Bed Processor Granulator system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluid Bed Processor Granulator with Top spraying system for Agglomeration and Granulation Process: The Fluid Bed Processor Granulator process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure. Other Information
|
|
Item Code: PFBPC Prism Fluid Bed Coater involves coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. Depending on the application required Prism Fluid Bed Coater can be configured into designs as follows: Fluid Bed Coater with Bottom Spray for Granules Coating or Pallet Coating: This Fluid Bed Coater process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a anotherOther Information
|
|
Item Code: PPME12 Prism Fluid Bed Wurster Coater involves coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required Prism Fluid Bed Wurster Coater can be configured into designs as follows: Fluid Bed Wurster Coater with Bottom Spray for Granules Coating or Pallet Coating: This Fluid Bed Wurster Coater process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPME13 Prism Fluid Bed Pellet Coater involves coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required Prism Fluid Bed Pellet Coater can be configured into designs as follows: Fluid Bed Pellet Coater with Bottom Spray for Granules Coating or Pallet Coating: This Fluid Bed Coater process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: FBPC Fluid Bed Processing involves drying, cooling, agglomeration, granulation, pellets and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, Confectionery, Agrochemical, Fertilizer, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. Fluid Bed Equipment with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: · This process is used to apply a coating to the granules or pallets. This process knows as wurster coater. · In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. · Then the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. · Once they are outside the wurster compartment, they move downward outside the compartment where they dry another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform.
Other Information
|
|
Item Code: PPME15 Prism Fluidize Dryer involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. Depending on the application required Prism Fluidize Dryer can be configured into designs as follows: 1. The Fluidize Dryer Mixing and Drying Process: The Fluidize Dryer system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size 2. The Fluidize Dryer with Top spraying system for Agglomeration and Granulation Process: The process is used in fluid beds dryer to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure. 3. Fluidize Dryer with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: This process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPME16 Prism Fluidize Powder Dryer involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required Prism Fluidize Powder Dryer can be configured into designs as follows:
1. The Fluidize Powder Dryer Mixing and Drying Process: The Fluidize Powder Dryer system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Fluidize Powder Dryer with Top spraying system for Agglomeration and Granulation Process: The process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure.
3. Fluidize Powder Dryer with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: This process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPFBP2 Prism fluid bed processing involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in pharmaceuticals, chemicals and biochemical, food and dairy industries.
Other Information
|
|
Item Code: PPME19 Prism Shelf Dryer Processing involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, confectionery, Agrochemical, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes.
Depending on the application required Prism Shelf Dryer can be configured into designs as follows:
1. The Mixing and Drying Process: The Shelf Dryer system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
2. The Shelf Dryer with Top spraying system for Agglomeration and Granulation Process: The process is used in fluid beds to form granules form a fine powder. The fluidized powder is wetted with fluid / binder / starch pest by using top spraying system. The top spraying system provided with spraying nozzle and precise dosing peristaltic pump. The fluidized powder is wetted until liquid bridges are formed between particles. Segregation of powder doesn’t take place as different powder is glued together on a micro scale. Since there is no impinging force in fluid bed equipments the granules are weak and having good solubility. Once the granules are made they are dried in the equipment using hot air. This technology used for formed granules for Tabletting, capsule, dust free process, free flow properties, good dispensability and excellent solubility due to porous structure.
3. The shelf Dryer with Wurster Coater Bottom Spray for Granules Coating or Pallet Coating: This process is used to apply a coating to the granules or pallets. This process knows as wurster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Than the particles are passing the bottom spray guns in orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry a another layer of coating can be supplied. Since the movement of the particle or pallets inside the wurster chamber totally controlled in ensures uniform. Other Information
|
|
Item Code: PPMFBG Fluid Bed Granulator involves drying, cooling, agglomeration, granulation, pellets and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Biotech, Nutraceuticals, Cosmetic, Chemicals, Biochemical, Food, Dairy, Confectionery, Agrochemical, Fertilizer, Herbals, Pain, Ceramics, Catalysts Industries and Pharma Institutes. · High Mixing Precision, Short Batch Time, Problem free Cleaning and Residue Free Discharge. · Single piece construction & Integrated retarding chamber cum filter bag housing. · Top Spraying system for Granulation. · Wurster Coater- Bottom spraying system for Granules, Pellet & Tablet Coating. · Granulation and Coating system with advance PLC controls system with MMI Touch screen. · Spraying system with atomized spraying gun and high precise flow peristaltic pump. · Sampling pot on product container. · Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube. · Dual speed mixing impeller for mixing and intensify chopper for granulating. · Filtration system comprising of 20 micron washable filter followed by 5 micron prefilter. Finally air is passes through 0.3 micron HEPA Filter. · Inlet Air handler with Air Filter- Micro and HEPA and Heat Exchanger. · Capacities from 15 Kg/Hr to 300 Kg/Hr Industrial Productions. · Design is cGMP – Current Good Manufacturing Practices compliance. · Product contact parts AISI 316/ 316L & non contact parts AISI 304. Fluid Bed stands a powerful stream of air up through your particulate material, suspending and circulating the particles like a boiling fluid. This churning action, or "fluidization," produces an even distribution of air among the particles, making the fluid bed perfect for heating, cooling, or drying processes. The fluidized particles can also be easily and evenly coated or otherwise treated using a variety of techniques. And since the fluid action is achieved using nothing more than air, your material is handled as gently as possible. Whatever your production needs,
Other Information
|
|
Item Code: PPFBPC Prism fluid bed processing involves drying, cooling, agglomeration, granulation and coating of particulate materials. It is ideal for heat sensitive and non heat sensitive products in pharmaceuticals, biotech, nutraceuticals, cosmetic, chemicals, biochemical, food, dairy, confectionery, agrochemical, herbals, ceramics, detergents and pharma institutes. Other Information
|
|
Item Code: PPMFBD High precision fluidize fast drying & agglomerating process technik Prism fluid bed processing involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in pharmaceuticals, chemicals and biochemical, food and dairy industries. the fluid bed dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size Other Information
|
|
Item Code: PPMFBPC High Precise Fluidized Bed Process Technik for Drying, Granulating & Pallet Coating. Prism Fluid Bed processing technology is a offer an effective and efficient method for drying, granulating, agglomerating and granules/ pellet coating. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Polymers, Food and Dairy Industries. The Fluid Bed Equipment has universal application. You can combine with mixing as a very rapid dryer in combo with suitable nozzle system a combined granulator, dryer and coater.
Other Information
|
|
Item Code: PPFBD New fastogranulatorcoater-COMBO: Fluid Bed Dryer- FBD Combo: High Precise Fluidized Bed Process Technik for Drying, Granulating & Pallet Coating. R- We Are manufacturing different type Pharma Machine. Prism Fluid Bed processing technology is a offer an effective and efficient method for drying, granulating, agglomerating and granules/ pellet coating. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Polymers, Food and Dairy Industries. The Fluid Bed Equipment has universal application. You can combine with mixing as a very rapid dryer in combo with suitable nozzle system a combined granulator, dryer and coater.
Other Information
|
|
Item Code: PFBD2 Fluid Bed Dryer (FBD) : 30 Kg to 500 Kg. Capacity High Precision Fluidize Fast Drying & Agglomerating Process Technology Prism Fluid Bed Processing involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries. The Fluid Bed system have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size
Other Information
|
Mr. Dilip Patidar
(Partner)
Plot No. 3713, Phase - 4, G. I. D. C., Vatva
Ahmedabad,
Gujarat -
382 445,
India
Telephone:+(91)-(79)-29095204
© Prism Pharma Machinery. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
|
Business Enquiry Form |
