Mitutoyo Precision Measuring Instruments

Mitutoyo Digimatic Vernier Caliper, Equipped with large & clear LCD readout, thus, allowing easy measurement. Moreover, it has a zero/ ABS key that allows display to be set at zero reading along with the scale at any slider position for incremental comparison measurement.

Specifications

Switch returns to Absolute (ABS) Coordinate & display of true position from origin point (Usually Jaws - Closed Point)
Accuracy : +/- 0.02mm
Resolution : 0.01mm Or 0.0005"/0.01mm
Display : LCD
Battery : SR44 (1pc)

Range

6"/150mm
8"/200mm
12"/300mm
18"/450mm
24"/600mm
40"/1000mm.

Mitutoyo Measuring Instruments Authorised Dealer In Chennai.

Other Information

• Pay Mode Terms: L/C (Letter of Credit), Other

Mitutoyo Dial Vernier Caliper

New Designed Dial Movement For Ultra Smooth Sliding & High Shock Protection.

Titanium Coating Is Applied To The Sliding Surface To Strengthen The Durability.

Can Measure OD, ID, Depth & Steps.


Specifications : 

• 150mm x 0.01mm
• 150mm x 0.02mm
• 150mm x 0.05mm

• 200mm x 0.01mm
• 200mm x 0.02mm
• 200mm x 0.05mm

• 300mm x 0.02mm

Mitutoyo Dealer In Chennai.

Other Information

• Pay Mode Terms: L/C (Letter of Credit), Other

Also Available ModelS : SJ 301 / SJ 401

we also provide service for the instrument

Avail from us Mitutoyo Digimatic Height Gauge that is acknowledged for highly versatility and multiple functionality. It is equipped with a carbide tipped long scriber and rigidly constructed, thereby, ensuring repeatable measurement. If demanded, it is also provided with 2 directional touch signal probe and can carry out quick and accurate measurement of steps. Available at industry leading prices, this range of gauge can be availed under the following technical specifications:

• Equipped with SPC Data Output
• Accuracy : +/- 0.02mm
• Resolution : 0.01mm
• Display : LCD, 6 Digit
• Max Response Speed : 500mm/s
• Battery : SR44 (1pc)

We offer this range of Mitutoyo Digimatic Height Gauge in variety of sizes, which are as follows:

• 0 - 300mm
• 0 - 600mm
• 0 - 1000mm

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

We provide Mitutoyo dial type height gauge with a dial height of gauge series 192-along with digital counter. This gauge can be availed in different sizes such as 300mm, 450mm, 600mm & 1000mm, along with the following features:

• Easy and error-free reading with both up and down digital counters as well as a dial
• Provided with a feed wheel for easy coarse feeding
• Provided with carbide-tipped scriber
• The counters and dial can be re-zeroed at any scriber position
• Has a dial reading of 0.01 mm or .001

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

We are one of the leading traders of a wide range of Mitutoyo Dial Indicators, with standard 0.01mm graduation dial gauges that have an outer frame of 57mm diameter. Each type of this range of dial indicator comes with limit pins and outer clamps.

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

 Features :
1. As Compact as Standard Series 2 Dial Indicators.
2. SPC Data Output.
3. The ID-S Indicates The Absolute Position Of The Spindle From The Origin Point At Powe On, Allowing To Start Measurements.

Specs :

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

Thickness Gauges Offer a Quick & Efficient Means Of Inspection With Their Convenient Grip Handle.
Ideally Suited For Measuring Thickness Of Paper, Films, Wire, Sheet Metal, Plastic Bags, Leather etc.

Digital Models Also Available.


Mitutoyo Authorised Dealer In Chennai. 

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

Mitutoyo Surface Roughness Tester SJ 210

We offer Mitutoyo Portable Surface Roughness Tester that is equipped with a display unit, which provides Ip53 protection and offers optimum resistance to dripping water and dust. Integrated with a built-in-battery, it is capable of 500 measurements in a stretch when fully charged. We also provide a convenient carrying case for protecting the instrument when in the field. Moreover, it also have in-built memory that is capable of saving up to 10 measurements. The technical specifications of this tester are as follows:

• X-axis (Drive unit)
• Measuring range: . 69" (17. 5mm)
• Measuring speed: . 01", . 02"/S (0. 25, 0. 5mm/S) .01"/S (0. 25mm/S: S-Type)
• Traversing direction: Backward detector
• Range: 13780µin (-7880µin to+5900µin)
• {350µm (-200µm to +150µm)}
• Detecting method: Skid measurement
• Measuring force: 4mn or 0. 75mn (Low force type)
• Stylus tip: Diamond, 90°/5µmr
• (60¨¬/2µmr: Low force type)
• Skid radius of curvature: 40mm
• Skid force: Less than 400mn

We Also Offer Other Models Such As SJ 301/SJ 401.
 

MITUTOYO Authorised Dealer In Chennai.

Other Information

• Pay Mode Terms: L/C (Letter of Credit), Other

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

• High Precision Angle Gage For Accurate Angle Measurement Of Machines, Molds & Jigs.

• Can Be Attached To Height Gauges

We offer mitutoyo slip gauge set.

Metric Rectangular Gauge Block Set - 1mm Base

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

We supply and export inside micrometer.

Inside Micrometers - Caliper Type

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

Mitutoyo Outside Micrometer

Features
1. Ratchet Stop or Friction Thimble For Exact Repetitive Readings.
2. With a Standard Except For 25mm Model.

Technical Data
Graduation : 0.01mm
Measuring Faces : Carbide Tipped

Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm

(Models with a range up to 1000mm are available)

Mitutoyo Disk Micrometer

Features
1. Diameter Of Measuring Disk : 20mm
(30mm : Models Over 100mm)
2. 0.7mm Edge Thickness (1mm : Models Over 100mm)
3. With Ratchet Stop For Constant Force

Technical Data
Graduation : 0.01mm

Range
0-25mm
25-50mm
50-75mm
75-100mm

(Models with a range up to 300mm are available)

Mitutoyo Point Micrometer

Features
1. The Measuring Points (Carbide Tipped) Have Approx 0.3mm Radius
2. With Ratchet Stop For Constant Force

Technical Data
Graduation : 0.01mm

Range
0-25mm
25-50mm
50-75mm
75-100mm

Screw Thread Micrometer

Features
1.Provided With a 60 Degree V-Anvil & Conical Spindle for Easily Measuring Pitch Diameters of Metric Threads.

Technical Data
Graduation : 0.01mm

Range
0-25mm
25-50mm
50-75mm
75-100mm

Mitutoyo Spline Micrometer

Features
1. The Anvil & Spindle Have a Small Diameter for Measuring Splined Shafts, Slots & Keyways.
2. With Ratchet Stop For Constant Force.

Technical Data
Graduation : 0.01mm

Range
0-25mm
25-50mm
50-75mm

(Models with a range up to 200mm are available)

Mitutoyo Digimatic Micrometer

Features
1. Provided With a Origin Set Key For Easy Origin Setting.
2. Measurement Readout With Large Characters On The LCD Screen.
3. Ratchet Stop For Constant Force.

Technical Data
Resolution : 0.001mm

Range
0-25mm
25-50mm (Coolant Proof)
50-75mm (Coolant Proof)
75-100mm (Coolant Proof)

MITUTOYO Measuring Instruments Authorised Dealer In Chennai. 

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

The blasted profile is measured very quickly and with a high degree of accuracy by operating the instrument as follows: Place the Profile Gauge on the glass plate and zero the instrument. Now place the gauge on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valleys allowing the gauge to display the peak-to-valley height. A number of measurements can be made to determine the average reading.

In addition to blasted profile evaluation, this gauge can also be used for pitting and cavity depths caused by corrosion.

DIGITAL Model Also Available.

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

Other Information

• Pay Mode Terms: T/T (Bank Transfer), Other

• Spring Loaded Plunger Expands Within The Bore (Or Groove), Allowing Determination Of The Internal Diameter.

• With a Knurled Clamp 

Series - CSAG

Our range of Mitutoyo Crank Shaft Alignment Gauge is designed to accommodate interchangeable length so that the measurement range of the gauge can be increased via extension. This is best suited for rapid and accurate measurement of distance between crankshaft webs, thereby, ensuring proper alignment of crankshafts and its friction-free rotation. Some of the salient features of our range of Shaft Alignment Gauge are as follows:

• Equipped with small dial indicator with pointed measuring contact built
• Spring tension in the dial gauge ensures perfect feel between contact points and crankshaft cheek
• Self contained holding of the instrument in position
• Has a weight threaded in the base so that the dial remains in horizontal position every time

In addition, the following are the technical specifications of our range of Mitutoyo Crank Shaft Alignment Gauge are tabulated below:

Other Information

• Pay Mode Terms: L/C (Letter of Credit), Other