The conical shape at both ends ends enables uniform mixing and easy discharge. The cone is statically balanced to avoid anyexcessive load on the gear box and motor. While the powder can be loaded into the conethrough a wider opening, It can be discharged through a mucon valve or a slide valve. Depending upon the product, paddle types baffles can be provided on the shaft for better mixing. Maximum care has been taken ensure safe operation of he unit. It can also be operated by a timer. The contact parts are either made of SS 304 or 316. Flame proof motor can be supplied as optional. Capacity 10 Ltrs. to 5000 Ltrs.
All Contact Parts Made Out of SS 316 / SS 316 L Quality Material Conforming to cGMP norms.
All pipelines are electro - polish from inside and joints are easy openable and fitting after cleaning.
Complete Lid lifting arrangement to facilitate cleaning and product change over, interlocked with safety device so that anchor stirrer statrts onllllly when lid closed.
Intensive mixing by special smi - contra design anchor stirrer avoiding dead zones. Contra Rotary Stirrer for Tooth Paste.
Variable Speed drive provided for main anchorstirrer asembly for different speeds.
All transfer are done under vacuum to avoid any hand touch and Contamination. complete untouched process
Bottom Entry angular homogenizer provided to ensure proper emulsification and homogenization of the product.
Forced homogenization in the mixing vessel or upon emptying.
Bottom homogeniser is provided with double cartridge mechanical seal with TC/TC seal face, with cooling water arrangement for the mechnical seal and water detection sensor to trip the motor if the fow of water to the mechanical seal is stopped, ensuring thorough safety of the seal due to its high speed application.
Octagonal shaped with rectangular center, conical discharge frustum and rectangular top frustum.
Baffles provided in the shell.
Manhole with gasket is provided to fix baffles and for ease of cleaning the shell. Charging and discharging is through a butterfly valve. A conical adaptor can be provided for fixing charging drum after butterfly valve.
Unit can be provided with bin charging arrangement.
All moving parts are enclosed in guards.
A safety railing with a limit switch is provided for operator safety.
Manual Inching arrangement can be provided.
Flame - proof motors with flame - proof push button stations can be provided.
Simple change over from screw capping to ROPP and Vice versa.
Minimum change parts required as star wheel is not required to be change, only bottle adopters are to be change without disturbing the setting of the machine.
Mechanical torque setting arrangement. Variable speed for slat conveyor.
Simple operation easy to operate and maintain the machine.
The basic equipment consists of machine base covered all around by SS flush type panels.The frame is providedwith a SS staircase & railings.
Over the frame there is RMG Bowl with pneumatically open able lid. It has two mixing blades. Material to be mixed is whirled and tumbled, close to the bottom of RMG bowl with the help of chopper blades. Chopper Tool located at the side preventslump formation. RMG produces a highly efficient, fast and homogenous mixing.
Sugar Charging Done Under Vacuum Complete untouched Process. All transfers done under Vaccum.
Can be equipped with CIP and SIP facility and Load Cell for online weighing.
PLC Based control pannel for process automation
All Contact Parts Made Out Of SS 316 cGMP Model. All pipelines are electro-polishfrom inside and jointsare DIN Standard easy openable and fitting after cleaning.
Inline filters to ensure filteration. Bucket filter and sparkler filter press provided.
Bottom entry Angular CROWEL TYPR IMPELLER for Uniform mixing.
INLINE Homogeniser can also be provided.
Transfer Pumps provided to transfer ready product to filling line.
Documentation: IQ / DQ / PQ / OQ and Process Validation support.
Fan is dynamically balanced with specially sealed bearing to withstand the high temperature
Heating Arrangement - Electrical / Steam heating
Designed for uniform circulation of hot air in the drying chamber
Tunnel type dryers wherein trolleys are placed one behind the other and double door loading
Electric heater terminals situated outside the hot zone in case of electrically heated dryers. Heaters are accessible and replaceable from outside the dryer
The front doors are explosion proof and are locked with the help of spring loaded ball latches with suitable pressure
Auto Feeding and Positioning of Tubes with Auto Filling, Sealing, Crimping, Fold stations, Coding and Ejection.
All contact parts are in AISI S.S. 316 and Teflon as per cGMP. Sturdy and Compact in design and Simple in operation. Less changeover time and easy cleaning.
Advance Technology of Ferguson Indexer and “No Tube No Fill” device.
Cassette Feed Device for Auto feeding arrangement of empty tubes in to the feed device along with Tube orientation eye mark registration device.
For Aluminium tubes: Reverse or Saddle Fold also Can Be Provided.
For Plastic/Lami tubes: Hot-Air Sealing with Leister Swiss make Heater is Provided.
K. S. R. Industriees We are a company of up to 25 employees, we are leading supplier and manufacturer of coating machines which includes de coating machines and paint booths.
Processing...
