Solar Power Products

Applications

• Street Lighting
• Pathway Lighting
• Ramp Lighting
• Sidewalk Lighting
• Private Road Lighting
• Jogging and Bike Path Lighting
• Perimeter Security Lighting
• Farm & Ranch Lighting
• Wildlife Area Lighting
• Park Lighting
• Yard Lighting
• Fence Lighting
• Campus Lighting
• Remote Area Lighting

Standard Features

1. Solar Panel: over 25 years of power generation capacity
2. LED Light: LEDs provide super-bright light from little power, need simple thermal management, and last up to 50,000 hours, with a 2-year warranty. LED wattage is equivalent to approximately half the wattage of high pressure sodium light.
3. Controller: over 8 years of typical operating life, with a 2-year warranty, automatic operation from dusk to dawn or timed ON/OFF operation
4. Pole: up to 25 years of long life time
5. Battery: 5 ~ 7 years of maximum life, with a 2-year warranty

Benefits

• No line voltage, trenching, or metering
• No power outages
• Battery backup for cloudy or rainy days
• Distributed light and power - no single point of failure for enhanced security
• Easy to install with quick connect plugs - less than 1 hour
• No scheduled maintenance for up to 5 years
• No cost of replacing concrete, asphalt or landscaping
• No cost of transformers or meters to be added for electric service
• Qualify for savings from various state and federal taxes and incentives
• No monthly electric bills
• Controlled charging to prolong battery service life
• Long life PV modules with more than 25 years of power generation capacity
• Environmentally friendly - 100% powered by the sun, solar panels reduce fossil fuel consumption, eliminating pollution
• Self-contained solution - Light on/off controlled by automatic daylight sensing or hour preset, no running or maintenance cost
• Better light source - LED lamps feature cool white light without flickering and higher brightness than sodium lamps
• Safe 12 volt/24 volt circuit, no risk of electric shock

The Solar Powered Fence is scientific Fence and works on Solar Energy with backup facility to run uninterruptedly during the nights as well as cloudy days. The whole system can be derived into two segments, one is the Electronic Unit and the other is the Fence.
 Electronic Unit consists of a Solar Photo Voltaic Module, Energizer, Fence Voltage Alarm (FVA), Battery and Charge Control Unit (CCU). The Solar Photovoltaic Module in the Electronic Unit converts the sunshine into electrical energy and charges the Battery through CCU. The Energizer through the CCU takes 12V supply as input and energizes the same into 7000 to 9900 volt pulses. These pulses will travel through the fencing wires at regular interval of around 1 pulse per 1.2 second with the duration of each pulse of about 3 milli seconds.


Features:

• Easy Construction.
• Power fence can be erected to target species only.
• Low maintenance.
• Long lasting because of minimal physical pressure.
• All domestic and wild animals can be controlled economically.
• Makes strip grazing and back fencing easy.
• Encourages additional subdivision, giving increased production.
• Modification of system to control a variety of animals is very easy.
• Aesthetically pleasing.
• Discourages trespassers and predators.
• Not harmful. It gives a short, sharp but safe shock to the intruder.

   

We are involved in planning, designing & installation of solar photovoltaic panels as per the energy requirements of a home/ industrial plant.
Our PVmodules comply with IEC 61215 & 61730 and UL 1730 standards with a product warranty of 1 years & performance warranty of 20 years.

We present an enduring collection of solar garden lights, widely used in various industrial units. Our solar powered garden lights are available in two types. Our solar garden lights can work for two days for non-shine days. Moreover, we make our products customized according to the requirement of our customers. Manufactured from superior quality mild steel they exhibit impressive performance and require barest minimum maintenance. The main aspect of our outdoor solar garden lights is that it switches on automatically at dusk and switches off at dawn. High illumination and wireless tendency has together makes us as one of the paramount solar garden lights manufacturers
IDEAL FOR
• Homes
• Hospitals
• Schools
• Hotels
• Shopping Malls
• Public Areas


FEATURES
• Self-sufficient systems
• Zero Maintenance
• Range of light sources
• Modular electronic components

Easy to install, no wiring required.

Automatically switches on the light at dusk and Switches OFF at Dawn.

High capacity Lead Acid sealed maintenance free, 12V, 7 Ah battery. 

Grid Solar Power Plant Engg Planning Contract

PV design & inverter selection:

There are many daunting questions and many different answers. It is not as simple as some EPC contractors make you believe.

Do you make it with high voltage modules or low voltage modules? Do you want 10 x 100 KW per MW or 2 x 500 KW per MW of inverter? Which voltage range do you choose? How many in series and how many in parallel? Which make of inverter suits the temperature range and hence the voltage range? What will be the extremes that the design can take from a voltage and current perspective, and what are the possibilities of that in the chosen location? On the inverter side – modularity and efficiency curves based on temperature conditions come into play as well.

Electrical design:

Line losses, wiring selection, weathering patterns for wiring – this again is very involved. What kind of junctions, where and how the entire wiring is circuited again has design complexities and considerations.

Structure design:

It is not simple “fix it at degrees equal to latitude” thing. Some companies who have experience elsewhere in the world have reported that good structure design can improve productivity by as much 10% while reducing capital costs. This is an experience thing, and not purely a theoretical calculation.

Civil design:

Again, the longevity can be greatly affected by this. As an example, there could be possibility of rain logging in the site, and we may need to raise the panels up. But, if there are maintenance issues when water is filled in the site – we may still need access for the panels – hence there may be a need for platforms that ensure access to the panels. This is just one example. There are so many other considerations that a good civil design can identify and provide for.

Evacuation design:

There are strict norms with which EB will accept the power, and design has to ensure that all those conditions will be met at all scenarios. Specialist consultants are needed for this, and not any other electrical contractor.

Maintenance and monitoring design:

Once you build the plant, it needs to be constantly monitored for optimized performance and hence a good ROI. Cost-benefit needs to be analysed with respect to the best-in-class monitoring solution.

Commissioning:

Project Management

Orchestrating all the pieces to come in place, as well as making sure that the engineering specifications are met during execution – is a very complex task, and one that requires organized and structured people.

Government Liaisoning:

Networks, ability to get work done, ability to get paperwork done are skill sets needed for this.
Team for execution: Major players in this phase are:

• PV Panel supplier
• Inverter supplier
• Electrical contractor
• Evacuation contractor (different from electrical)
• Civil contractor including foundations
• Structural designer and contractor (different from civil)

Features: 

1) High heat effectiveness: higher than all glass evacuated solar collector tube by 15%

2) Heat pipe conduction: successfully prevents the defects of tube breakage and low power output caused by water fouling and deposits or dust and sand.

3) Prevents the tube from being easily broken caused by volume expansion when water freezes in the frigid season.

4) Low thermal capacity makes the tube start up quickly.

5) Energy output within only 2 minutes of sunshine

6) Insulation temperature can reach 250deg;C, average heat efficiency can still be more than 50%; even under 50deg;C

7) High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube has higher heat output in cloudy weather and in moist areas,especially in winter

8) Solar collecting pipe is sealed inside a high quality borosilicate glass tube with 5 x 10 3Pa of vacuum, to stop corrosion.

Residential Solar Water Heater Based On Flat Plate Collector

• Residential house
• All kind of hot water application
• Investment return 3 years
• Long life up to 20 years
• No depending on electricity
• Minimum maintenance

System specification

System temperature	60 deg Celsius
Circulation	Thermo siphon type
Application	bathing
Backup facility	2 kw electric heater with thermo start
Working pressure	up to 3 kg/ cm

• Water Hardness Recommended up to 300 ppm
• Water hardness a bove 300ppm
• Heat Exchanger Model Available
• Pressurised Model Available

Available

100,125,150,200,250,300,400.500 liter capacity

All kind of hot water application

Residential Solar Water Heater Based On Evacuated Tube Collector

• Residential house
• All kind of hot water application
• Investment return 3 years
• Long life up to 20 years
• No depending on electricity
• Minimum maintenance

System temperature	60 deg Celsius
Circulation	Thermo siphon type
Application	bathing
Backup facility	2 kw electric heater with thermo start
Working pressure	up to 3 kg/ cm

• Water Hardness Recommended up to 300 ppm
• Water hardness a bove 300ppm
• Heat Exchanger Model Available
• Pressurised Model Available

Available

100, 125, 150, 200, 250, 300, 400, 500 liter capacity