We offer a range of residential solar water heating systems which are used for residential purposes. These are known for the following features:

• All kind of hot water application
• Investment return 3 years
• Long life up to 20 years
• No depending on electricity
• Minimum maintenance

System Specification:

• System temperature: 60 deg Celsius
• Circulation: Thermosiphon type
• Application: Bathing
• Backup facility: 2 kw electric heater with thermo start
• Working pressure: up to 3 kg/ cm

Recommendations:

• Water Hardness Recommended: Upto 300 ppm

For Water hardness above 300ppm there are:

• Heat Exchanger Model Available
• Pressurised Model Available in following specifications:
  100, 125, 150, 200, 250, 300, 400, 500 liter capacity

We are a leading manufacturer of industrial solar heaters which are used in all kind of hot water application. These solar water heater can return your investment in 3 years. These products have long life of upto 20 years. These are known for their low maintenance.

In this system, the collector and water tank are separated and they are running on high pressure. We adopt the controller that is special in solar water heater and automatic running with high pressure. The pressure water tank can be installed anywhere of the room.

System Specification:

• System temperature: Output 80 deg C
• Circulation: Motor circulation
• Application: All kind of hot water application
• Backup facility: Electric heater with thermostart
• Freezing protection: Provided
• Air vent valve: Provided
• Pressure relief valve: Provided
• Working pressure: up to 3 kg/ cm

This product consists of a solar water heater consists of a collector to collect solar energy and an insulated storage tank to store hot water. Here the solar radiation is absorbed by flat plate collectors which consist of an insulated outer metallic box covered on the top with glass sheet. Inside there are blackened metallic absorber (selectively coated) sheets with built in channels or riser tubes to carry water. The absorber absorbs the solar radiation and transfers the heat to the flowing water.

In this system the solar energy collector is made of double layer borosilicate glass tubes evacuated for providing insulation. The outer wall of the inner tube is coated with selective absorbing material. This helps absorption of solar radiation and transfers the heat to the water which flows through the inner tube.