PTH Pharma Industries

• It is a high speed Rotary tablet press for higher table output, suitable for large batch production.
• Double Rotary Tablet Press Machine is having a square design with full consideration of GMP standards.
• All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone.
• Double Rotary Tablet Press Machine machine is having elegantly designed cabinet top of SS-304.
• The machine is having round hoppers of SS-316
• The Double Rotary Tablet Press Machine is having A.C. variable frequency drive for the main motor.
• Machine is also having A.C. variable frequency drive for force feeding motors, which enables operators to synchronize machines speed & feed both.
• The machine is having Electromagnetic clutch arrangements.
• The Double Rotary Tablet Press Machine is having one piece turret of special grade casting. However, three piece turret with SS-304/SS-316 middle plate is also available (optionally). Electro less nickel plating can also be available to the turret, (optionally).
• Lower punch seals are provided at lower punch hole in turret.
• The Double Rotary Tablet Press Machine is having Helical gear ring to drive the turret.

• Proven Strain Gage Sensor Technology
• Accurate Compression Force Readings
• Long Life
• Shear Pin Configuration
• Replaces Existing Yoke Pin For Lower Compression Roll
• 15t Capacity Rating; Other Sizes Available
• Precision Machined And Heat Treated Stainless Steel Cell Body

• Two channels of continuous strain gage main compression roll peak force monitoring
• Expandable to additional channels, for part ejection & pre-compression roll monitoring
• Proven PTM module strain gage signal conditioning
• 12” color, touch screen panel PC with Ethernet for optional remote monitoring
• Display and monitoring of calibrated peak compression roll forces for each tablet (2 stations)
• Machine RPM & PPM display, with parts counter
• Adjustable high/low alarms for both channels, with alarm relay
• Separate proximity switch timing input for each channel, per staggered roll timing
• Job recipe storage for 250 jobs
• On-line SPC data collection
• Tablet weight & tablet height feedback adjustment outputs (0-10VDC)
• Housed in rugged steel NEMA. enclosure, with keylock door

• Good part trend sampling routine, to arrive at an average learned force benchmark for each channel
• Adjustable high & low tolerance alarms for each channel, based on good part benchmarks, for tool protection and tablet quality
• Adjustable discreet high & low capacity alarms on each channel for machine protection
• Dry contact latching alarm relay output, activated by any alarm condition

• On-line SPC data collection & display of peak tonnage values for each station Store up to 40,000 points per station:
  • individual
  • average
  • median
  • range and moving range
  • standard deviation
• Automatic storage of last 200 load signatures
• Ability to overlay and display multiple signatures
• Automatic storage of last 1000 alarm conditions, with date & time stamp
• Downtime reporting, with programmable downtime event for each condition

• 0-10VDC analog feedback output signal for 2 separate tablet weight cam adjustments, force based to maintain proper compression roll force
• 0-10VDC analog output signal for 2 separate compression roll tablet height adjustments are recipe based
• Tablet weight cam & compression roll adjustment actuators to be furnished by customer

• Available in "B & 'D" Tooling in both models
• Turret speed up to 40 RPM
• AC Inventor Drive for main motor
• Centrally driven slotted turret fitted with thrust bearing
• Low noise level.
• User-friendly access.
• Operator safety through upper guard Interlocking

• All controls are outside the machine
• PLC system
• SCADA system
• Turret fully Electrode less Nickel Plated
• Force Feeder with A. C drive
• Inbuilt Pre-Compression

• Available i.e. "D", "B" and"BB"Tooling
• Turret with lower punch seal
• Safety interlocking for Upper& Lower Guard
• Gravity Feeding System
• Two Piece Turret
• Upper Roller with Reflection Adjustment System
• Control Panel With Bypass Switches
• Control Panel with Separate display for TAB LET COUNT and RPM
• Fixed Hopper with slide to control power flow
• Hand Wheel Provided
• Re-designed variable speed pulley
• Turret of 5GIRON40G/12grade casting
• Cam tracks & pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up of Phosphor Bronze.
• Machine is total enclosed i.e. top half of the machine (Compression zone) with SS hood, acrylic covers in G.M.P model. This reduce the noise level and to&fro flow of dust between compression zone and machine room.
• Phosphor bronze bush provide inside the turret hold
• SS Turret Guards
• Lower Punch Cam can be removed without dismantling tie Lower Roller Assembly

• Turret with Electro less Nickel plating including Nickel Die Plate
• Upper Punch Cup Seals
• Lower Punch Key Way for break-line/Embossing Alignment

Blank