Pulsecho Systems Bombay Private Limited

mPRINT : Field Printer is a micro-dot printer with graphics that directly interfaces with PULSECHO and OPTEL instruments to print readings one at a time or all readings in the logger memory.
The mPRINT uses a highly reliable EPSON print mechanism, ordinary paper and a long life silk ribbon cassette which can be reinked. Operating on rechargeable NiCd (Nickel Cadmium) batteries, it is fully portable for field use and is supplied with a charger.

mPRINT has a self test to check its operation. It has a baud rate selector. It can be used with any electronic equipment giving TTL or RS-232C output. The mPRINT can also be supplied with CENTRONICS-8 input port as special requirement. It is housed in a plastic (ABS) cabinet and has a label giving operation in brief.

New SONODEPTH with microprocessor circuitry has features like LO DEPTH alarm. Compensations for water temperature, sweet or salt water selection, prnter port with graphic or digital printout at adjustable time intervals. It is an echosounder for measurng water depth in silting or sedimentation studies, dredging surveys in laes, rivers, ports, sea, etc. Operating on dry cells its probe is held over board touching the water surface, or mounted through the boat hull.

UV-METER :A silicon photovoltaic sensor with spectrol response similar to the human eye measure illuminance upto 50k lux. This covers most of the range in artificial and natural lighting.
Applications -
a) Lighting designers and contractors b) Architects and interior decorators c) Stage and display lighting

• Six hardness scales plus strength of material
• Conversion from one scale to another
• Compensated for direction of measurement
• Automatic error detection
• Prints results on mPRINT
• Measures on many materials

Multiscale: Vickers, Rockwell & Brinnel Testers, compact and rugged for insitu as well as laboratory use.
HAREDENSTAT with motorized low load probe is a Non-Destructive Tester.
A Vickers diamond indenter oscillating at ultrasonic frequency indents the test specimen depending on the hardness. Operating on rechargeable batteries, it gives excellent results on smooth surfaces. A magnetic measuring stand gives a very steady hold and helps measurement in any orientation.

Optel's HT-7 : Based on Leeb's or energy quotient principle, it is well suited for not so smooth surfaces and large jobs with thick sections. An Impact body in the probe is impelled on the specimen surface. The ratio of its forward and return velocities is measured.
The microprocessor in these testers interprets the measured ratio into a hardness value on the selected scale. When a number of measurements have been made, statistical results are calculated which can be displayed and printed on the mPrint.

These well proven non-destructive gauges for wall thickness measurement and lamination detection are now the ultimate word in inspection, quality control and corrosion monitoring.

Velocity measurement facilitates metallurgical studies like nodularity, graphite size and tensile strength of castings. Probes of 2.5 and 5 MHz and various contours (shapes) cover all thickness gauge needs even at elevated temperatures.

• 1200 reading data logger with excellent memory management (100 files)
• 10 years data retention without power
• Multifunction unit with HI/LO gain settings and backlit LCD
• PC/Printer interface with data transfer utility
• HI quality mPL series probes with lemo connectors
• Resolution .01/.1mm & .001 / .01 inch

Dual purpose gauge for measuring coatings on ferrous (magnetic) as well as non-ferrous materials. Completely cuts out guess work from coating thickness measurement usually associated with magnetic pull type of mechanical gadgets. Compact and rugged construction with custom liquid crystal display and key pad controls makes these gauges extremely reliable.

For measuring sound intensity levels and noise pollution. The new digital dB-METERs cover wide range of 30 to 130 dBs in just three ranges and has a maximum hold mode.
Analog dB-METER (50 to 126 dBs) is low cost but very welproven in the field. Measures sound level of sirens, horns, motors, crackers, speaers, buzzers, etc. Noise level of machine tools, gearbox pump, in industry, factory, plants and auditoriums. dB-CAL is used for calibrating the two dB-METERs.

Three functions - Stroboscope, contactless tachometer and contact tachometer with Anemometer option. The solidstate high intensity light in the stroboscope allows dry cell operation and is very compact. The STROBOTACH and contact tachometer have 20,000 RPM range whereas contactless tachometer is usable upto 1,00,000 RPM. Other attachments like anemometer, surface speed and lifting speed extend the usefulness of the STROBOTACH.
mP-TACH and STROBOLITE are models wth partial functions of STROBOTACH

It's the first truyly portable Black & White transmission Densitometer with 0 to 4 D measuring range and +0.02 D accuracy. Its rugged construction makes it ideal for use in the field as well as laboratories. The self contained light source make it independent and reliable. Push button zero and read contraols make the operation very simple. Advanced low power circuitry allows a long battery life for the dry cells or optional rechargeable cells. Applications - a) Industrial and medical radiography b) Opacity of foil stock like paper, films, cloth, plastic sheets, etc. c) Metallizing of films, glass and foils

TOK-IN : Token/Numeric indicator. This system allows you to display Three digit number and select one of two indication lights at a remote display even upto 100 meters distance. TOK-In comprises of a key-board with a local display and a slim ceiling / wall mounting remote display. The number is entered and confirmed first on the local display and then displayed on the remote display using SEND command with a ding-dong sound.

These low cost, hand held, portable detectors are effective maintenance tools. Meant for industrial use they have proven indispensable for preventive and predictive maintenance

Moving Message lets you display your sales messages, advertisements, statutory information and warnings, time, etc. You can use your imagination to Programme the Moving message with a detachable keyboard. The fascinating animation and display functions can attract attention of the people to whatever you want to say. Moving Message has a battery backed memory of 2000 letters and is available in various sizes to suit your requirement. It can operate from 230V mains or a car battery.

Radiation detectors, monitors, with GM counters for radiation surveymetry and dosimetry, find use in industrial and medical radiography, nucleonic gauging, measuring leakage radiation, etc.

With a range of 8 to 92% RH covers most areas of environmental testing. It finds use in Food and Grain processing, Pharmaceutical and Agro industries, Airconditioning, and environmental control, Textile and chemical plants. A stable capacitive sensor gives direct reading of RH. It can be calibrated using double walled calibration chambers which maintaining known humidity. DIGI-pH-ASE : Digital pH Meter. This is a hand-held pH meter with +0.01 pH resolution and temperature compensation. DIGI-pH-ASE is meant for field use with combined delectrodes for quick pH measurement. Working from a 9v battery it has built-in LO BATT. indication and A.P. and Slope corrections.