General

The feed material is fed into center of rotor and is conveyed to the periphery through series rotor plate, thus gradually reducing to find powder. Screen drum fitted around rotor, permits ground material of desired fineness to come out of the mill for collection.

Salient Features:

• Nine standard modelsranging from 160 mm Dia to 1000
mm Dia (5 H.P. To 125 H.P.)
• L & T type pins
• Pneumatic conveying can be offered
• MOC in MS/SS wear parts / SS complete
• Round pins in stator and or rotorwith fine pitc
• Whizzer/ gap plate type pin mill (screen less) can be
provided
• More out put than conventional mill
• Narrow band of fineness
• Final product cool and smooth
• Less power consumption
• Occupies less space
• Rapid & adequate ejection of pulverized material
from all over the screen
• Allows feed material with higher percentage of fat
and moisture
• Sturdy & vibration free construction
• Easy to clean & easy to operate

The Wizzcon mill (air swept mill) is a screenless size reduction machine used to grind material which is of fibrous in nature in to fine powder. The feeding is done through wide hopper in to the grinding chamber. Here a case hardened double ended or star type swing hammers rotate at high speed attached to the rotor. The whole grinding chamber contains replaceable liners so that main body will not be subjected to wear & tear. The ground material is graded to the size by whizzer classifier and transfer to the cyclone collector pneumatically. The classifier may be adjusted according to the mesh size requirement of material & pneumatically. The fan maintains constant airflow in the mill chamber in order to discharge the product.

Technical Specification:

Model No.	Capacity KG/HRS	Power Required(H.P.)	Speed in RPM	DIA of mill Chamber	No. of Hammers
PWM-1000	1000-1200	75-100	1800	750 mm	16-92
PWM-750	800-1200	60-75	1800	750 mm	12-72
PWM-600 B	600-800	40-50	2000	600 mm	12-36
PWM-600	400-600	30-40	2000	600 mm	8-24
PWM-400	300-400	10-20	3000	400 mm	8-36
PWM-300	150-200	7.5-10	3000	300 mm	4-36
PWM-200	50-100	5	3600	200 mm	4-24

Specifications & design are subject to change without notice for any additional improvement.

Premium disc mills are rugged construction. The main body is made of C.I/welded steel. The front door, which is having serrated grinding disc, can be easily opened and hence making conveniently for cleaning. The door is hinged for ease of operation. The material is fed with either vibratory feeder / screen feeder through feeding hopper. The material is pulverized between two serrated hardened discs. The gape between two plates can be adjusted by outside from outside. The ground material can be conveyed by blower through cyclone collector, which is installed with rotary air lock valve on gyro screen, which Screens the material and coarse material in reefed into disc mill for further grinding. The fine and acceptable material is collected in drums/bags. complete system is installed on steel frame.

Special Features:

• Low, medium to high capacity. Two units can be given
in one line to increase the output
• Comparatively low energy consumption
• Complete system i.e. automatic production
• Compact design /space saving design
• Economical / efficient Design
• Heat sensitive plastics (thermo plastics)
• High & low density polythelene
• Rigid & soft P.V.C.
• Poly mides
• Poly propylene
• Polyester
• Synthetic rubber
• Cool grinding
• Short residence time
• Narrow particle size controlled feeding
• Unique - auto servo controlled feeding
• Temp & current monitor system
• Changeable / adjustable grinding element
• Compact design.
• Water jacketed arrangement available

The  whirlpool micronizer unit consists essentially of an assembly of multi- chambered rotor units interpolated with circular discs and mounted on a shaft which rotates insides a casing lined with alloy steel liner plates. A lower and upper fan cause an air current to circulate through the annular space between the rotor and stator, the quantity of which is regulated by means of air slides.

The material to be pulverized is fed into the base of the ultrafine unit and is introduced in an intensely turbulent and upward moving air current until it reaches the upper section of the unit.

A re-cycling duct ensures that any insufficiently ground material can be re-introduced into the lower section. The complete installation also includes a cyclone for the collection of finely ground material and a dust collector.

Salient Features:

• For solid liquid separation.
• 8 standard models /basket Dia 300 mm to 1500 mm.
• Offered in various material of construction.
• Bag lifting & basket lifting also offered

The purpose of a mixer is to blend together two or more ingredients. In a horizontal mixer the mixing cycle is fast and dry or wet mixing can be done. A ribbon paddle type auger is mounted on the mixer shaft and conveys the material from one end of the mixer to the other while is tumbled within the mixer. Discharge opening is provided at the bottom to help in rapid discharge. These mixers are ideal where viscous material like (molasses) up to 10% is added. The “Premium” horizontal mixer has a main body constructed from steel plates of adequate thickness to give rigidity and robustness and stiffeners are provided appropriately. The shaft is supported on self aligning bearings on which the blender ribbon / paddle is mounted. The ribbon angle is adjusted to give maximum mixing efficiency. Liquid is poured into a perforated tray located at the top, through which it trickles down on the.

Plants:

• Masala plants
• Curry powder plants
• Chilly lines
• Turmeric lines
• Pepper cracking plants
• Milling plants for oleoresins

Key - Equipment:

• Miracle mill (star hammer mill)
• Universal mill
• Micro pulverizers
• Pin mills
• Roller mill box
• Pre cleaners
• De-stoners
• Wizzcon mills
• Dryers
• Blenders
• Vibro screens / plan sifter
• Rosters
• Conveyors / elevators

Premium In Contest Of Spices Processing:

All the equipments manufactured by the premium group are used in spices processing. The choice of the machine depends on the processing requirements and the nature