We offer a wide assortment of PMC de-watering pumps we offer are appreciated for their highly efficient air/water separation tank, standardized and custom built of the pumps and others. These are manufactured using qualitative raw material sourced from reliable vendors. The customization provided with the range is as per the requirement provided by the clients.
 
Salient Features:

• Upto 36 meter head
  
• Flexible coupling between prime mover and pump
• Automatic flapper discharge valve
• Vacuum pumps driven by common prime mover through belt drive arrangements
• Designed and manufactured by PMC Well point Systems Dewatering Pumps, are available in standard sizes from 4" (110 mm through 10" (250mm) suction
• All sizes are available with either diesel engine or electric motor drive, and on either skid mounting or wheeled trailer chassis as required
• Each PMC vacuum pump is capable of displacing 125 CFM free air
• PMC Well point dewatering pumps are developed to offer discharges ranging from 30 LPS to 300 LPS and total head upto 36 meter.
  

We manufacture a wide assortment of PMC well point dewatering systems that are used to remove excess of water from saturated soil mass which is called for to make working easier in wet conditions and possible below natural water level. The entire range is designed using qualitative raw material sourced from reliable vendors.
 
The PMC well point dewatering systems are effectively used in the soils that have sand contents of about 20% or more.
 
The PMC well point system has been proved most effective way of Dewatering for many types of civil works such as:

• Excavations for basements and foundations of Buildings
• Foundations of DAMS, Bridges, Power houses & Underground tanks   
• Laying of deep sewer lines
• Excavations and lining works for canals and channels etc
• Tunnel work
• Sub-ways (Tube Railway etc.)
• Reclamation of land
• Water supply
• Reclamation of chemicals

 
 Advantages:

• Before starting the construction work well point system helps in dewatering the construction, allowing unimpeded excavation, which reduces down time of the work force and invaluable time is saved.
• Hydrostatic pressure from the bottoms of excavations is reduced, preventing them from heaving. It also protects sloughing or failure of slopes.
• To support the sides of excavations Amount of sheeting required
• No fear of “cave ins” as the fine soil particles are not removed from the surrounding area. It kept he soil stabilized.

 

PMCWell Point equipment we manufacture are specially designed and assembled for the well point dewatering system. These are acknowledged for their light weight, rugged construction and are regularly improvised to fully utilize the pumping capacities. These are manufactured using qualitative raw material such as PVC, brass, stainless steel, mild steel and others that are sourced from reliable vendors. The PMC well point equipment we deal in comprises:

• PMC Well point dewatering pump
• PMC well point strainer
• PMC swing joint assembly
• PMCWell tops
• Header pipes

PMC water ring vacuum pumps we manufacture are appreciated for their host of qualitative features. These are available in two sizes PM-l and PM-2 and are widely applicable in the following areas:

• PMCVacuum Pump for Well Point System
• Priming of large Centrifugal Pumps
• Reactors
• Vacuum Dryers

 
Salient Features:

• PMCPumps are Single Stage Double Suction Centrifugal Displacement type
• Multivane impeller is housed in cylindrical type casing
• The motor revolving eccentric to casing throws the liquid by centrifugal force on casing to form a liquid ring, which rotates at the rotor speed, forces the water to enter and recede the individual pockets, thus creating vacuum

 
Technical Specification:
 
The table given below is the performance of the PMC pump under the operating condition at 1450 RPM:

Pump Model	Suction/Deliver	Max. L/Sec	Discharge M3/Hr.	Max. Vacuum MM (Hg) Inch	Motor Kw/HP
PM-1	40 x 40 mm	22	80	650/25.6	3.7/5
PM-2	50 x 50 mm	80	215	650/25.6	7.5/10

NB: PM-Series Vacuum Pumps are widely used in PMC Dewatering Sets and give outstanding mechanical and hydraulic performance.

We offer a wide assortment of suction centrifugal pumps that have gained huge accolades in the market for their host of qualitative features. The entire range is available with the following:
 

Pumps Casing	Volute type with top directed radically positioned flanged delivery Outlet
Impeller	Closed type, dynamically balanced with thrust balancing chamber. The impeller is fitted easy replaceable wear rings
Bearing Housing	Bearing, amply sized; serves as a base and support of the over hanged wet end
Shaft	Guided and supported by two lubricated ball bearings housed in the bearing stand support. Bearings are amply sized for coupling to electric motors and endothermic engines by means of flexible coupling
Stuffing Box	The stuffing box can be sealed by gland packing or by Mechanical seal

 

The entire range finds extensive application for water piping in the following areas:

• Civil and industrial waterworks
• Irrigation systems
• Fire fighting systems
• Boosting applications
• Dewatering

PMC pumps with jet fitting are connected to the high pressure jetting hose with the jetting pump that creates the set-up for ‘jetting in’ the well points. The “O” Ring equipped with the jet fitting provides a leak free pressure connection of the well point and riser pipe to the jet pump.

These fittings can also be customized as per the specification given by the clients.