Degreasing chemicals are effectively used for removing impurities. These degreasing chemicals are used during the manufacturing process and quite effective for short term protection of metal. Technical specifications of our degreasing chemicals are :

Product Name	Description	Appearance	pH (5% solution)	Application
Qualicleanser W	It is a natural low foaming Liquid Spray Wash Cleaner specially designed to give performance over wide range of temperature, pressure on ferrous and non ferrous metals within Production Engineering.	Clear Light Yellow Liquid	7-8%	It is ideally suited for remover of Swarf and other impurities, metals working fluids and oily rust preventives from metal during manufacturing process particularly where short term protection is required.

Product Name	Description	Appearance	pH (4% solution)
Qualikill RR	is specially designed blend specially selected corrosion inhabitor, specially selected wetting agent and phosphoric acid as a carrier. This product is specially designed to remove rust by scrubbing, spraying and scrubbing to remove the rust. Qualikill –RR can be washed with water and cleaned part is protected from rusting for few hours. Cleaned parts after washing with water can be coated with rust preventives to stop further rusting.	Bright Clear Amber colour liquid	1.16 typical

We offer different types of industrial waxes which have been used for various applications. Our range of industrial waxes include the following :

Product Name	Appearance	Melting Point	Acid No	Application
Qualiwax HM	White Free flowing Powder	95 -100°C	0.5 max	Rigid PVC Pipe, Master Batch, PVC Stabilizer etc.
H C Wax	Yellow Free Flowing Powder	90 – 92°C	0	Rigid PVC Pipes
Microfine Wax	White to off white cake form	Above 85°C	0	Pain Balm

The wax emulsions offered by us have diverse applications and are used in different industries. These wax emulsions are used for providing resistance to scuffs and moisture. Apart from this, they are used for providing protection against corrosion and rust. Hence these wax emulsions cater to needs of all and can be supplied in bulk quantities.

Product Name	Base Wax	Solid Content (%)	pH	Nature	Application
Qualiwax C 40	Paraffin	40± 1	4-5	Cationic	Construction Chemical
Qualiwax C 60	Paraffin	60± 1	4-5	Cationic	Construction Chemical
Qualiwax W 50	Paraffin	50± 1	8-10	Non Ionic	Textile, Particle Board, Ceramics, Rubber, latex etc.
Qualiwax PE	Polyethylene	24± 28	8-10	Non Ionic	Mould Release, Paper Coating, MS Coating, Ink, Textile etc.
Qualiwax CA 30	Carnuba	30± 1	8-10	Non Ionic	Auto Polish, shoe Polish, floor polish etc.

Some of the features of high performance emulsifier packages supplied by us are :

1. High performance Emulsifier Package for soluble Metal Working Fluid.

Product Name	Appearance	Acid Value	Solubility in Water	Emulsion Stability @ 800 ppm Hard Water	Cast Iron Corrosion Test	Copper Strip Corrosion test	Dosage in Mineral oil / Base Oil
Qualimol-18	Clear Red Brown viscous liquid	10 Max	Gives Milky White Emulsion	Stable for 24 Hrs	Passes	Passes	15-16% w/w

2. Emulsifier Package for Knitting Oil

Product Name	Appearance	Acid Value	pH	5% solution in Tap Water	Dosage in Mineral Oil / Base Oil
Qualimol- KOE	Light to pale yellow clear liquid	5 max	4.5–7.5	Gives Emulsion	8-10 % w/w

3. Emulsifier Package for Conning Oil

Product Name	Appearance	Acid Value	pH (5% solution)	Dosage in Mineral Oil / Spray Oil	Advantage / Benefits
Qualitex COE	Clear yellow viscous liquid	5 Max	Neutral	10% w/w	(1)Adjusted viscosity produces 10W frictions & reduces break levels. (2)Powerful static protection at low application levels. (3)Compatible with conventional weaving sizes. (4)Reduces needle wear in high speed Knitting process. (5)Excellent scourability yielding level dyeing.

The polymer additives offered by us are available in different forms and can be used for various applications.

Product Name	Description	Appearance	Melting Point	Acid No	Application
Qualiwax QD	Non Polar Polyethylene Wax	Free Flowing white Powder	108 – 112°C	0.5 max	Polyethylene Master Batches, Rigid PVC Pipes extrusion.
Qualiwax KT 25	One pack Lubricant system suitable for Rigid PVC Pipes/Conduits/Profiles.	Creamish White Powder	108 ±5	0.5 max	RPVC Extrusion of Pipes/Conduits/Profiles. Suitable for ISI/Pressure (Containing 8-10 phr. Filler) & Commercial / non pressure (Containing 25-50 phr. Filler) grade RPVC pipes. No other Lubricants like Stearic Acid, Calcium Stearate, Waxes are needed while using “QUALIWAX – KT 25”
Qualisol OP	Synthetic Wax	Creamish Flakes	85±2	3 Max	Rigid PVC Pipes / Fitting / Conduits Rigid & Flexible PVC Film / Sheets PVC Bottles / Containers PVC Profiles / Sections
Qualiwax C	Fatty Bisamide Wax designed to provide ultimate performance in plastics processing.	White Powder	143 ±5	10 Max	Rigid PVC, Plasticized PVC, Polyolefin’s, Polyamide Nylon, ABS/ Polystyrene.

We manufacture a wide range of rust preventive oil additives. Our range of rust preventive oil additives are discussed below :

Product Name	Type	Application	Performance in Salt Spray (ASTM B 117)	Performance in Humidity Chamber(ASTM D 1748)
Qualicoat 124 C	Solvent & Oil Base	Solvent & Oil Based general Purpose Rust Preventive Additive.	10% in MTO 72 Hrs+ 15% in MTO 150 Hrs + 20% in MTO 200 Hrs +	25 Days + 45 Days + 60 Days +
Qualicoat MP	Solvent & Oil Base	Multipurpose Additive Package designed for superior performance in Acid Fume, Salt Salt spray & Humidity tests.	5% in MTO 15 Hrs + 10% in MTO 120 Hrs 15 % in MTO 150 Hrs + 20% in MTO 250 Hrs + Acid Fume Test 5% in MTO 24 Hrs 10% in MTO 35 Hrs 15% in MTO 40 Hrs	12 Days + 45 Days+ 90 Days + 120 Days +
Qualicoat AFR C	Solvent Base	Solvent Base Acid Fume Resistance Concentrate	12.5% in MTO 72 Hrs + 15 % in MTO 100 Hrs+ Acid Fume Test 5% in MTO 16 Hrs 10% in MTO 24 Hrs	25 Days + 45 Days +
Qualicoat 201 C	Solvent Base	Solvent Base Rust Preventive Additive for general purpose	10% in MTO 72 Hrs + 15% in MTO 150 Hrs +	25 Days + 45 Days +
Qualicoat 125 C	Oil & Solvent Base	Barium Free Oil & Solvent Based General Purpose Rust Preventive Additive Concentrate	10% in MTO 72 Hrs + 15% in MTO 150 Hrs +	25 Days + 45 Days +

Excellent quality drawing and stamping lubricants availed by us cater to the requirements of various industries. Our range of drawing and stamping lubricants have the following features :

PROPERTIES	QUALIJOTH SERIES
	PL 60	PL 80	PL 100	PL 120
Appearance	Dark Brown to black Liquid	Dark Brown to black liquid	Dark Brown to black liquid	Bright Brown to black liquid
Specific Gravity @ 30ºC	0.93	0.93	0.93	0.894
Flash Point ºC COC	180	180	180	200
KV @ 40ºC cst	460	460	460	105
EP Properties	200 kg	180 kg	450 kg	450 kg
Jet Water Wash ability	Excellent	Excellent	Excellent	Excellent