Fire Protection System

Backed by the extensive experience, we are engaged in the supplying of fire protection equipments that is safe for people and environment. The system is installed with three principles of fire extinguishing that are emulsification, smothering and cooling. Sourced from reliable vendors, the system has longer working life and is efficient enough to avoid any kind of accidents. Our equipments is well checked at our end on various parameters to ensure flawless range to the client.

We offer fire protection equipments which are well known for the following features:

• Quite known name in the market
• Mainly water system
• Based on hydrant and sprinkle less system

We hold expertise in offering our customers Multipurpose Damper i.e. two type of multipurpose damper including Fusible Link Type or Actuator Sumatic Type. The panel of the damper is fabricated from 16 SWG (MS/GI) sheet that has thickness of 40/42 mm for delivering better operational efficiency. For insulation purposes, we also make use of Sirawool/ Glasswool as an infill material. Further, the frame of damper is made from MS 14 SWG and confirm in accordance with CBRI Rule UL: 555.

 

Specifications:

 

Sizes:

 

• Both standard & custom sizes available having no limits

 

Frame Configuration:

 

• Standard frame designs as well as specially engineered special frame profiles can be offered to complement wall construction & architectural style

 

Performance Combinations:

 

• Doors can be manufactured for multiple performance requirements including acoustical, blast, radio frequency shielding, thermal protection or any combination thereof

 

Finishes:

 

Wood veneer doors:

 

• Sanded
• Primed
• Completely pre-finished prior to shipping

 

Stainless steel finishes:

 

• Can be embossed, patterned, etched, bead blasted & colored

 

Apart from these, Bronze, Brass, Copper and Plastic / Wood Laminate finishes are also available.

 

General purpose or HMPS Doors offered by us feature use of GI/MS/SS sheets having thickness of 20 SWG, which is used to fabricate panel. With overall thickness of 40 / 42 mm, the panel is provided with inbuilt stiffeners to affix hardware based on configurations/ BOQ. Further, here as an infill material, Honeycomb craft paper/Thermocole is used.

 

Features:

 

• Frame fabricated from 16 SWG GI/MS/SS sheet having single rebate
• Double rebate/ engineered special frame profiles also available to complement wall construction & architectural style
• Can be made available on specific requests
• Accessories / Iron mongery not included but made available optionally

 

Radiation Shielding Doors offered by us are made in single panel / double panel or sliding type designs using GI/MS/SS sheets having thickness of 20 SWG (used to fabricate the panel depending upon radiation level). Further, it features infill material used is lead sheet of different thickness depending upon radiation level & its application.

 

Features:

 

• Panel provided with stiffeners inbuilt to affix hardware based on configurations/ BOQ
• Factory prepared frames for masonry, concrete, expansion bolt or weld – in anchorage & shipped set up and welded (or knock down where shipping limitations mandate size for large units)
• Standard frame design is also made available
• Provision also for engineered special frame profiles to complement wall construction & architectural styles
• Accessories / Iron mongery are not included but can be made available optionally