Radix Electrocast Private LimitedKolkata, West Bengal | Year of Establishment: 2004 |  |
| PRODUCTS & SERVICES | |
|
| ProductsMS SQUARE BARS Size Range : 10mm to 50mm Length: 5.8 meters Grades : IS 2062 or Customer Specific Standard SS Bright Bars Size range :12. 00 mm to 60. 00 mm. Dia. Process : cold drawn, peeled, centre less ground & polishedtolerance: h9, h10, h11, k12, k13, astm a484, din 1013grades : 201, 202, 303, 304, 304l, 316, 316l & its equivalentusages : valves, fasteners, bushing & food equipments stainless steel bright bar is an industrial product and the manufacturing process comprises of drawing, peeling, centre less grinding, centre less turning & polishing or a combination of such processes. The product has bright lustrous look sue to cold finish process and has controlled dimensional accuracy and improved mechanical properties. SS Flat Bar Size Range :6.00 mm to 18.00 mmLength : 3 to 7 meters (12 to 24 feet)Grades : AISI 200, 300 & 400 series or equivalent international gradesFinish : Cold Drawn, both ends are color-coded, as per the requirement Stainless Steel Flat Bars have over a period gained tremendous importance as it is now the most preferred material in Utensils, Architectural Structures, Building Frames and Structures, Decorative Hardware and also for various general purposes for shaft keys and special purpose applications.We manufacture a wide range of flat bars with regards to sizes, thickness, grades and finish. Flats are produced as per international specifications, maintaining close dimensional tolerances and required mechanical properties. SS Square Bars Size Range : 6.00 mm to 40.00 mm Length : 5.8 meters We manufacture a wide range of square bars with regards to sizes, thickness, grades and finish. Bars are produced as per international specifications, maintaining close dimensional tolerances and required mechanical properties. Ss Hex Bar Size Range : 12.00 mm to 40.00 mm Length : 5.8 meters We manufacture a wide range of hex bars with regards to sizes, thickness, grades and finish. Hex are produced as per international specifications, maintaining close dimensional tolerances and required mechanical properties. MS WIRES Size Range : As per customer Requirement Stainless Steel Wires Size Range : 0.15 mm to 5.20 mm Grades : AISI 200, 300 & 400 series or equivalent international gradesFinish : Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)Quality : Braiding, Knitting & Wearing Quality, Cold Heading Quality, Re-draw Quality, Spring Quality, Fine, Coarse & Welding Wires Stainless Steel Wire are widely used in the Wire mesh, Food, Engineering, Chemical, Construction and various other industries. We manufacture quality wires to comply with international standards as well as in accordance with customer's specifications. Grates Castings like Grates, is manufactured as per the customer specification and application. Drawing or sample has to be provided by the customer to develop the patter and coherently the product. Manhole Covers Manhole covers are manufactured of various sizes in grey iron and ductile iron. These are designed as per the customer’s need based upon the drawings provided. We offer solutions for Standard Municipal, Construction, Industries & Urban settings. Manhole Covers - HighlightsAvailable in grey and ductile ironLoad rating available: A15, B125, C250, D400Manufactured to EN-124 standardsNew patterns can be developed in six weeks MS BEAM Size Range : 125 x 70mm to 350 x 140mm Length & sizes : As per customer Requirement MS H BEAM Size Range : HB 150 x150, SC 152 x 152, WB 203 x 152 MS H BEAM Ferro Manganese Manganese (Mn %) : 70 Min Silicon (Si %) : 1.50 Max Carbon (C %) : 6 - 8 Phosphorous (P %) : 0.30 Max Sulphur (S %) : 0.05 Max MS Angles Size Range : 20 X 20 X 3mm to 200 x 200 x 25mm Length : 5.8 meters Thickness : 3 mm to 25mm Grades : IS 2062 or Customer Specific Standard Meter Box SGCI Meter Boxes are being manufactured as per the requirement of the clients. Water Meter Box Castings like Water meter box is also manufactured as per the customer specification and application. Drawing or sample has to be provided by the customer to develop the patter and coherently the product. MS TMT BARS Size Range : 6 mm to 40mm; Ms Flats Size Range : 20 X 3mm to 100 x 10mm Length : 5.8 meters Thickness : 3 mm to 10mm Grades : IS 2062 or Customer Specific Standard Pig Iron Pig iron is produced from Mini Blast Furnace. It contains at least 92% Iron (Fe). We ensure the best quality products are being procured from the manufacturers and stringent quality norms are being maintained and tested before being supplied to our esteemed clients. Weight of each piece of Pig iron is 10-15 kgs. The various grades of pig iron available with us are as follows:-
 Silico Manganese Manganese (Mn %) : 60 / 65 Min Silicon (Si %) : 14 - 18 Carbon (C %) : 2.10 Max Phosphorous (P %) : 0.30 Max Sulphur (S %) : 0.035 Max Ferro Chrome Chrome (Cr %) : 60 - 65 Silicon (Si %) : 4.00 Max Carbon (C %) : 6 - 8 Phosphorous (P %) : 0.05 Max Sulphur (S %) : 0.05 Max Ferro Silicon Silicon (Si %): 70 - 75 Carbon (C %): 0.15 Max Phosphorous (P %) : 0.05 Max Sulphur (S %) : 0.05 Max Aluminium (Al %) : 1.50 Max Erw Pipes We are associated with one of the most premier manufacturer of ERW Black Steel Pipes & Tubes in India. These are available in different thickness from 2.00 mm to 8.00 mm having an outer diameter ranging from ½” to 8” NB as per specifications of ISI, BIS which confirms to various International standards. The company pipes of highest quality and to sustain such standards, it follows stringent quality norms, regular in-house evaluation and constant manpower training. The pipes produced have wide application into industries like Agriculture, Oil Industry, Public Health, Housing, Irrigation, Engineering, etc. The application areas of he products of the company is in Water, Gas, Steam, Air, Idlers and Belt Conveyors, Scaffolding, Hollow Steel section for structural purposes, Rectangular SS Angles Size Range : 20 X 20 X 3 mm to 100 x 100 x 12 mmLength : 5.8 meters Thickness : 3 mm to 12 mmGrades : 304 ; 304 L ; 316 ; 316 L Stainless Steel Angles are mainly used in construction industries, lifts, shopping malls & households. These high grade stainless steel products ensure rust free and optimal quality. These are available in sizes, thickness and grades. SS Angles are produced as per international specifications maintaining required mechanical properties. Grinding Balls Size Range: 25 mm to 130 mm Hardness: HRC 58-63 Charecteristics: High hardness No breakage Even wearing Good wear resistance Applications: Mines Cement Plants Power Plants Counter weight We are supplying steel grinding media in various alloy steel compositions like Cast Iron, Hyper steel & High Chrome, shapes and sizes for diverse grinding and milling applications. We are producing grinding media for cement plants, power plants, mining industries, coal fields, etc. for grinding as well as counter weight purposes. The hardened steel balls are available in different hardness, as required, in both high carbon steel and chrome alloy steel. Precise heat treatment insures their resistance to flaking, chipping or spelling.
Due to high volume consumption of grinding media balls, cost and durability becomes vital. Our focus has been to provide the most cost saving and most durable grinding media in the market. We supply our grinding media in various finishes and shapes to save every penny spent by the customer upon it. We maintain the characteristics of the balls with high hardness, no breakage, even wearing and good wear resistance.
The hardness, toughness and tensile strength of the grinding media are high to lessen the cost of grinding media consumption. We are producing these balls in Medium frequency Induction furnace and casting is done in sand prepared moulds only to get the desired quality. Then it is suitable heat treated to obtain the required hardness and microstructure. The hardness at any point across the section of ball is not less than 375 HB and of High Chrome Balls is HRC 58-63. Ms Channels Size Range : 75 x 40mm to 400 x 100mm Length & sizes : As per customer Requirement Ms Round Bars Size Range : 6 mm to 40mm Length: 5.8 meters Grades : IS 2062 or Customer Specific Standard Sponge Iron Sponge iron is a key raw material in steel manufacturing process. The appropriate percentage removal of oxygen(metallization) ensures the high quality of the sponge iron. The percentage of metallization is the ratio of metallic iron to the total iron present in the product.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Processing... |
| ||||||||||
