Our range of hardware items include curtain rods that are available in different sizes and designs, thus offering wider options to the clients. Available at economical rate, these rods are skillfully designed and fabricated by our team of experts who leave no scope for any flaw. 

Size

½” x 12 FT.

¾” x 12 FT.

1” x 12 FT.

Available in different finishers.

 Shelving Strips and Channel

Book Case Type	Book Case Raised	Book Case Flat	Book Case Channel
Size Width x Length	24.5 x 1825	19 x 1825	16 x 3500
Steel Thickness	1.0	2.0	0.6
Hides For Screw No.	5	5	5
PRS in case	100	50	100
Approx.wt.per 100 PRS (kg)	33kg	47.400kg	45kg

We manufacture piano hinges out of fully automatic platnt and offering wide range of piano hinges that are fabricated from certified and well-tested metals, procured from reputed suppliers. 

 Continuous (Piano) Hinges Standard Drilled And Counter Sunk

Size Length	25,32,40,50	25, 32, 40,50	25, 32, 40,50	25,35,40,50	25,32,35,40,50	30,36,40,50
Steel Thickness	0.50	0.60	0.70	0.80	1m	1.20m
Length M/M	Upto 3500	Upto 3500	Upto3500	Upto2130	Upto2131	Upto2183

  
Continuous (Piano) HingesStandard Uncranked Knuckle, Fixed PIN (Undrilled)

Size Length	25,32,40,50	25,32,40,50	25,32,35,40,50	30,35,40,50	40,50,60,75
Steel Thickness	0.66	0.66	0.88	1.20	1.60
Length M/M	Upto2130	Upto3500	Upto2130	Upto2130	Upto2130

We are making available high quality butt hinges that are used to hinge a household door, a window, a small cupboard door and can also be used on flush doors when little hardware. After install only the pin of the butt hinge shows when the door is closed. Our range also includes heavy duty architectural metal corner braces that have a variety of applications. Suitable for harsh corrosive environments, these braces in various finishes. These are highly durable and can endure high amount of pressure and tension.

Drop Forged from Carbon / Chrome Vanadium Steel and is throughout hardened & tempered, chrome plated. The jaws are angled at 15º for easy grip and comfortable approach. The spanners are based upon BIS/DIN Standards.

A – Recessed Panel
B – Long Pattern – DIN 3110
C – Fully Polished Elliptical Type
D – Satin Finish Elliptical Type
E – Cold coined and stamped
F –  Jumbo Type DIN-895

We are specializing in the manufacture combination spanners that are double-ended tool with one end being like an open-end wrench/open-ended spanner and the other end being like a box-end wrench/ ring spanner. Both ends generally fit the same size of bolt.

 Drop Forged from Carbon / Chrome Vanadium Steel and is throughout hardened and tempered, nickel chrome plated. The open end set at 15º and ring end finely machined for perfect geometry. Spanners are available in head polished, satin or matt finish. The spanners are based on BIS/DIN specifications.

A – Recessed Panel
B – Raised Panel
C – Fully Polished Elliptical Type
D – Satin Finish Elliptical Type
E  - Cold coined and stamped

We are providing an extensive range of ring spanners that find application in automotive industries. Manufactured in accordance with defined quality standards, these spanners are available in various sizes, for meeting different application requirements.

A – Recessed Panel
B – Raised Panel
C – Fully Polished Elliptical Type
D – Satin Finish Elliptical Type
E  - Cold coined and stamped

Successfully catering to the demands of automotive industries, we are offering superior range of wheel spanners that are used for dismantling the punctured tyres. An important automotive tool it is made of best quality steel that is alloyed with other metals, which makes it resistant to wear& tear and corrosion.

We are offering jack planes that are extensively used for general smoothing of the edges and sizing of wood. Ensuring enhanced durability, the range is made of superior quality material that is rust-proof and resistant to abrasion.

RI-139 Jack Plane
Made from fine grain iron casting with bottom perfectly machined. High carbon steel blades accurately heat treated  & sharpened to razor edge. Brightly Polished hard wood handles for comfort & control.

No.	Lenght in mm	QNTY/CTN/PCS.
3	200	15
4	225	12
5	350	10
6	450	6
7	500	6

RI-140  Block plane 

MM.	Inches	QNTY/CTN/PCS.
140	5.5	40
175	7	30

RI-142  Jack Plane Corrugated Base
Made from fine grain iron casting with bottom perfectly machined.

No.	Lenght in mm	QNTY/CTN/PCS.
3	200	15
4	225	12
5	350	10
6	450	6
7	500	6

Our range of hand tools include pincers that are used for gripping or holding purposes. These pincers are provided with well-designed jaws and handles that offers firmer grip. Generally used for holding hot articles like hot metal or coal particles, it is also used for gripping wires and cables.

 RI – 124 Tower PincerDrop Forged from carbon steel, hardened and tempered cutting edges. Suitable for twisting, bending and cutting of wires. 

MM	Inches	QNTY./CTN/PCS.
200	8	72
220	9	72
250	10	60

Available with or without sleeve

RI- 127 Cobler Pincer
Drop forged, cutting edges duly hardened and tempered 

Mm	Inches	QNTY./CTN/PCS.
150	6	96
175	7	72
200	8	60

Available with or without sleeve

We are offering wrecking bars that are extensively used for plucking out nails from wooden blocks and other such plucking purposes. It can also be used for hammering & ripping purposes. Our range also include chisels that are used in metal work, specially for softening and cutting of heated metals.

RI-157 WRECKING BAR
Forged from selected carbon steel, dully hardened and tempered

Size (mm )	16x450	16x500	16x600	18x450	18x500	18x600	18x700	18x750
QNTY/CTN/PCS.	24	24	24	20	16	12	12	12

RI-155 MASON CHISELS (A) FLAT (B) POINTED
Forged from selected carbon steel, dully hardened and tempered

MM	Inches	QTY./CTN/PCS.
200	8	60
250	10	48
300	12	36
350	14	36

Available with or without grip

Our premium collection includes leather tool pouches that are commonly used for carrying various hand held tools. Made of heavy-duty top grain cowhide leather, these tool pouches can be customized as per the specifications of the clients.

RI -171
10 Pocket Professional Split Leather Carpenter Nail & Tools Apron
1 Large Pocket, 1 Medium size flared pocket 2 belt level stitched pockets, 6 small pencil & tools pocket, 1 metal hammer holder with metal tape holder

RHI-31
Industrial leather gloves
sizes: 14" 15" 18"

RHI-32
Canadian leather gloves

RHI -170
Pocket Economy Split Leather Carpenter Apron with Web Belt
2 large main pocket, 2 medium size front nail pockets, 6 small pencil or tool pockets, 2 leather hammer holder loops with metal tape holder.

RI -174
All leather Gloves Without Inner Lining


RI-176
2 Pocket Split Leather Large Nail Bag
2 Large pockets, 1 hammer lop belt. Adjustable web belt with plastic buckle

RI -173
 5 Pocket Professional Style Split Leather Carpenter Apron with Web Belt
1 large main pocket, 1 medium size pocket with metal tape holder 3 small tool pockets & 1 knife sheath with 1 leather hammer holder loop