We offer a range of FIRE HYDRANT SYSTEM and YARD HYDRANTS with all required accessories. Some of the feature of this systems are as follows -

HYDRANT SYSTEM

• The Hydrant System comprises of AC motor driven pump sets with all required accessories including valves, instrumentation and controls etc.  Complete in all respects. An automatic hydrant system is furnished covering the areas completely from independent        
• Pipe work from  the fire water pump set.
• The hydrant pipe work is remaining pressurized through the proposed jockey pump taking  care of any leakages in the system pipe lines, valves and fittings.
  
• The hydrant system is kept charged by pressurized water at approx. 7 Kg. Cm. Sq. at all  times.  In the event of fire when any of the hydrant valves in the net work is opened,the resultant fall in pressure system is enabling starting the AC MOTOR driven fire water pumping set through pressure switches automatically.  One diesel engine pump shall be standby pump serving hydrant system.  Apart from the automatic starting of the pump sets,provision shall be kept for manual starting also.  Shutting down of the pump sets shall be manual.
  

YARD HYDRANTS

• Hydrants inside the building is furnished with required accessories such as hose  pipes with  instantaneous gun metal couplings and g.m branch pipes located in hose cabinets.  The hose cabinets is wall / column mounting type, constructed out of 18 gauge mild steel sheets.
• The internal hydrants ( Landing valves) is single headed type taken out from  150/100 mm dia riser through suitable reducer.  The outlets is gun metal and confirm to IS : 5290.  HT Hose reels is firmly held against the wall by suitable heavy brackets and supports.  The hose reel is swinging type ( 180 deg.) and the entire Dum reel etc. is as per IS : 3876.  The rubber tubing is best quality ( Dunlop ) and the nozzle is 6 mm dia. Shut off type.  The equipment shall be out of one of the approved makes
  
• The hydrant main is laid in the form of ring main.  The hydrant risers is terminated with air release valves at the highest points to release the trapped air in the pipe work.

All sprinklers is brass castings polished / chrome OR white (polyester) unless stated otherwise and rated for 12.0 KG/CM2 WG and factory tested for 34.0 KG/CM2.  Sprinklers is pendant OR side wall type as specified and shown on drawings.  All sprinklers shall be provided with an adjustable OR Rosettes escutcheons finished same as the sprinkler head.

Temp. classification of sprinklers in each space shall be as shown on the drawings.  Spinklers shall be selected for the coverage shown on the drawings and ordinarily be 15 MM.  Wherever the specified sprinkler is not adequate.  The tenderes may offer appropriate size required.  Tenderers are free to suggest alternatively other suitable sprinklers with its justification.

We offer our clients our qualitative range of fire alarm systems that is manufactured by certified companies. These fire alarm systems work on 230V supply and have provision for battery backup. The equipment provides relay output for interfacing with security panel, auto-dialer, audio alarm via siren or buzzer and have zone-wise visual indications for open, short, test or bypass conditions.

• Light test feature makes testing easy with a flashlight beam
• 85 dB alarm
• Two 9-volt batteries included
• 5 year limited warranty

• Number of pixels PAL: 512(H)*582(V)
• System of signal NTSC/PAL
• Lens 16mm
• Horizontal resolution 420TVL
• Minimum illumination 0Lux
• Backlight compensation auto
• Electronic shutter 1/50(1/60) ~1/100,000sec
• White balance auto
• S/N ratio 48dB
• Gamma correction 0.45
• Operation temperature -20~50
• Sync. System internal
• Video output 1.0v p-p /75Ω
• Power supply DC12V, 8000mA
• Dimensions (mm) 60(w)*55(h)*130(d)

• Valves
• Pipework
• Seals
• Strap
• Padlock
• Earthing
• Cabinet locks
• Pressure test at inlet
• Pressure test at outlet
• Non return valves
• Drain down system

Our company supplies flooding systems that are based on Co₂ (Carbon Dioxide) gas. Co₂ is used in the system due to its high ratio of expansion that facilitates rapid discharge and allows three-dimensional penetration of the entire hazard area quickly. CO₂ extinguishes a fire by reducing the oxygen content of the protected area below the point where it can support combustion. The extreme density of CO₂ assists in permeating the protected hazard area effectively and suppresses the fire. Due to the rapid expansion of the 4-6 inches of CO₂ snow to gas, the ambient temperature is reduced in the protected hazard area. This helps in the extinguishing process and retards re-ignition. CO₂ is electrically non-conductive and it has no residual cleanup associated with its use as a fire-suppressing agent. The proper ventilation allows the gas to escape to atmosphere after the fire has been extinguished.

We offer our clients a wide range of water spray system that is manufactured by reputed vendors. These systems find application in various commercial and industrial establishments. We have several types available with us that include systems with G.M/SS type nozzles with stainless steel clamp for quick fixing or unfixing of nozzles. This arrangement helps in cleaning of the nozzles easily without any help of tools. Our water spray systems have sturdy looks and are durable enough to resist the pressure created by the water force.

Sprinkler is thermo-sensitive quarzoid liquid glassbulb burst actuated type and be standard products from an established firm of repute and standing and approved by an appropriate authority for fire fighting duty.   It should be imported only.

All sprinklers is brass castings polished / chrome OR white (polyester) unless stated otherwise and rated for 12.0 KG/CM2 WG and factory tested for 34.0 KG/CM2.  Sprinklers is pendant OR side wall type as specified and shown on drawings.  All sprinklers shall be provided with an adjustable OR Rosettes escutcheons finished same as the sprinkler head.

Temp. classification of sprinklers in each space shall be as shown on the drawings.  Spinklers shall be selected for the coverage shown on the drawings and ordinarily be 15 MM.  Wherever the specified sprinkler is not adequate.  The tenderes may offer appropriate size required.  Tenderers are free to suggest alternatively other suitable sprinklers with its justification.

• A B C" Stored pressure type: Our ABC fire extinguisher is useful for fires of A, B and C types. Fire breaking out in these types involves cotton, wood, grease, flammable liquids, electrical wiring, live machinery and others. The blanketing effect of extinguishers helps in decomposing fire rapidly. Our equipment is available in following specifications:

• B.I.S. Specification: 13849
• Capacity: 1Kg, 2 Kg, 5 Kg, 10 Kg, & above with ISI Mark

• CO2 type fire extinguishers: We supply CO2 fire extinguishers that are used for class B and C fires. These classes include oil spillages, fabric, delicate machinery and various other material. Our CO2 type extinguishers are able to extinguish fire by blanketing dilution of oxygen and cooling effects. These are available in following specifications:

• B.I.S. Specification: 2878
• Capacity: 2, 3.2, 4.5, 6.5, 9 kg. & 22.5 kg with ISI Mark

• Dry chemical powder type fire extinguishers: Our trolley mounted dry chemical powder fire extinguisher is used in controlling class B and C fires which include fire caused due to material such as fats, gases, paints, oils, electrical wiring, solvents, varnish, live machineries and others. These extinguish fire by displacement of air, beating and decomposition of dry powder effects. Our dry chemical powder type fire extinguishers are offered in following specifications:

• B.I.S. Specification: 2171 & 10658 :
• Capacity: 5kg, 10 kg, 25kg,50 kg,75 kgs with ISI mark

• Mechanical foam (AFFF): We supply mechanical foam fire extinguisher that is used for class A and B fires. These classes involve fire due to various liquids such as paints, tar, solvents, benzene camphor, naphtha, varnish and fats like grease and oils. These also include solids such as pigments, resins and oils. Our mechanical foam extinguisher controls fire by cutting off the atmospheric supply of oxygen to the burning surface that is known as blanketing process. It also cools down the container and contents. These are available with following specifications:

• B.I.S. Specification: 10204 & 13386:
• Capacity: 9 ltr & 50 ltr with ISI mark

• Reel diameter: 550mm / 600mm
• Tail: 3 / 4" or 1"
• Hose length: 20m / 25m / 30m

We offer our clients 63mm Single outlet Landing Valve as per IS: 5290 Type A specifications. These ISI marked hydrant valves are available in 75mm NB inlet & 63mm female inst. outlet. These are manufactured by using Gunmetal of IS 318 LTB2/ SS304/ SS316 specifications. Its inlet can be provided in flanged type as per our client’s requirement. The outlet is generally female instantaneous and male inst. outlet is available on request. Our hydrant valves are available in size range of 38mm to 63mm.