IndiaMART.com

Verified Supplier
Kutch, Gujarat
ORCall:
Products & Services

Grease Nipples

They are small and inconspicious, but responsible for keeping machines and all kinds of equipment in motion - whether in a harvester in Russia, a pipeline in Alaska, or a brewery in Australia.

 

There is a Rama Steel Products Grease Nipple for every application purpose in most sizes, types and composition. With a range of more than 1,500 different types of nipples with about 70 different thread forms we offer the largest product line worldwide.

Depending on the application and the installation sizes, we can manufacture grease nipples according to international standards. Other than a standard version made of steel, zinc-plated and passivated, we offer many other types, made of brass or stainless steel.

 

You will always find a solution in our range of products - even for the most challenging application.

Flush-type Grease Nipple

Flush-type Grease Nipple

 

Application Area: 

 

Flush-type grease nipples are particularly suitable for installations where extending or protruding nipples cannot be used.

 

 

Versions:

 

In general, our flush-type grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a cylindrical thread. Of course, our flush-type nipples are also available in different angle versions, with a self-forming thread, or as drive-in type. We offer various standard types also in brass or stainless steel V2A/V4A.

Upon request, Rama Steel Products manufactures flush-type grease nipples in further versions, with respect to e. g.

  • dimension
  • material
  • thread size
  • thread form (e. g. with tapered thread)
  • different opening pressure
  • surface colour (e. g. yellow passivated)
  • further surface treatment
  • etc.

 

Mounting Instructions

 

Flush-type nipples are only suitable for press-greasing by means of a Rama Steel Products extension tube or a Rama Steel Products push-type grease gun with pointed, pin-pointed, or combi-nozzle.

Product Code: DIN3405
Minimum Order Quantity: 100000 Pieces

Button-Head Grease Nipple

Button-Head Grease Nipple

Application Area: 

 

Rama Steel Products button-head grease nipples are particularly suitable for lubricating points with a big grease volume because of their specific high flow-rate of grease. As another result of the robust construction, these grease nipples are preferably used in the construction machinery.


Versions:

The Rama Steel Products button-head grease nipples are available in four different sizes:

  • head Ø 10 mm = M4
  • head Ø 16 mm = M1
  • head Ø 22 mm = M22
  • head hexagon-type, wrench size 15 mm = T1

In general, our button-head grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a cylindrical thread. We offer various standard types also in brass or stainless steel V2A/V4A.

Upon request, Rama Steel Products manufactures button head grease nipples in further versions, with respect to e. g.

  • dimension
  • material
  • thread size
  • thread form (e. g. with tapered thread)
  • different opening pressure
  • surface colour (e. g. yellow passivated)
  • further surface treatment
  • etc.

 

 

Mounting Instructions:

 

In order to allow for a proper lubrication with all common grease guns, the head space, which is necessary for installation, should be considered.


Operating Instructions:

As suitable lubricating nozzle, we recommend our button-head coupler

Product Code: DIN3404
Minimum Order Quantity: 100000 Pieces

Ball-Type Grease Nipple

Ball-Type Grease Nipple

 

Application Area: 


ball-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. They are more and more often replaced by hyraulic-type grease nipples according to DIN 71412 due to their manifold application purposes.

 

Versions:

 

In general, our ball-type grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a tapered thread.

The head diameter is 6.5 (-0.2) mm /0.256" - 0.008".

We offer various standard types also in brass or stainless steel V2A/V4A. Of course, our ball-type grease nipples are also available in different angle versions, or as drive-in type.

Upon request, Rama Steel Products manufactures ball-type nipples in further versions, with respect to e. g.

  • dimension
  • material
  • thread size
  • thread form (e. g. with cylindrical thread)
  • different opening pressure
  • surface colour (e. g. yellow passivated)
  • further surface treatment
  • etc.

 

 

Operating Instructions:

 

As suitable lubricating nozzle, we recommend our hollow-type nozzles or hydraulic nozzles by using our push-type grease guns type A+B.

Product Code: DIN3402

Bayonet Grease Nipple

Bayonet Grease Nipple

Application Area:

 

An especially strong and reliable connection with the grease nipple will be achieved by using the bayonet coupler. The construction design also results in a specific high flow-rate of grease. Particularly suitable for the heavy industry, for example ship building.

 

Versions:

 

In general, our bayonet nipples are made of steel, zinc-plated and passivated, and they are featured with a tapered thread. We offer various standard types also in brass or stainless steel V2A/V4A.

Upon request, Rama Steel Products manufactures bayonet grease nipples in further versions, with respect to e. g.

  • dimension
  • material
  • thread size
  • thread form (e. g. with cylindrical thread)
  • different opening pressure
  • surface colour (e. g. yellow passivated)

 

 

Operating Instructions:

 

As suitable lubricating nozzle, we recommend our bayonet coupler.

Minimum Order Quantity: 100000 Pieces

Grease Nipple Assortment

Grease Nipple Assortment

Variety of grease nipple attachments can be trusted to always have the right one available.

In case you require a different assortment, will be happy to handle this on a case by case basis
requiring a minimum order.
Grease Nipple Assortments made of steel,

zinc plated and passivated

Steel Assortments Sort 80 Sort 170 Sort 350
cons. of: Ref.-No.: Ref.-No.: Ref.-No.:
Ref.-No.: -Typ 6008100 6017140 6035140
1100704 H 1, M 6 x 1,0 15 40 50
1100907 H 1, M 8 x 1,0 15 30 40
1101109 H 1, M 10 x 1,0 10 20 35
1101156 H 1, R 1/8" 10 15 30
1101457 H 1, R 1/4" ---- 10 15
1204504 H 2, M 6 x 1,0 5 5 25
1204507 H 2, M 8 x 1,0 5 5 20
1204709 H 2, M 10 x 1,0 5 5 15
1204756 H 2, R 1/8" ---- 5 15
1201457 H 2, R 1/4" ---- ---- 10
1304504 H 3, M 6 x 1,0 5 5 20
1304507 H 3, M 8 x 1,0 5 5 15
1304709 H 3, M 10 x 1,0 5 5 15
1304756 H 3, R 1/8" ---- 5 15
1301457 H 3, R 1/4" ---- ---- 15
4101709 M 1, M 10 x 1,0 ---- 5 5
4101761 M 1, G 1/8" ---- 5 ----
4101762 M 1, G 1/4" ---- 5 ----
4302262 M 22, G 1/4" ---- ---- 5
7351311 515/G, M 10 x 1 ---- ---- 2

Minimum Order Quantity: 100000 Pieces

Grease Nipples - Stainless Steel

Grease Nipples - Stainless Steel

Please find hereafter a selection of our grease nipples which we provide in the galvanized steel
variant, in brass and also - as standard - in stainless steel.

The stainless steel grades we most commonly use are 1.4305 = 303 (V2A) and 1.4404 = 316L (V4A). Other
models and materials can, of course, be supplied. Do ask us about the types wanted and sizes !

What is the origin of the "V2A steel" and "V4A steel" names?

    V2A Steel came about in the German Krupp steel works in 1912 as "Versuchs (test) smelt 2
Austenite" and has remained to this day as the most usual designation in Germany.
    V4A also arose there as "Versuchs (test) smelt 4 Austenite" and continues to be known of under
this test heading.

Austenite is the name for a chrome/nickel steel which cannot be hardened by heat treatment and is, as
a rule, non-magnetiseable.

In particular, more and more enquiries are being made about V4A stainless steel. What makes this
material so special ?

    In contrast to SST303 (V2A), SST316L (V4A) steel - 1.4404 is additionally alloyed with 2 -2.5 %
of molybdenum (Mo). This makes the steel that much more resistant to corrosion - especially in media
containing chloride (seawater, swimming baths, chemical industry, etc.). In addition, its exceptional
longevity ensures that the material is used in a highly cost-effective manner.

The standard grease nipples listed on the following pages are the products of our own manufacturing -
with use made of these materials:
Descr.     Steel grade     DIN (Europe)     ASTM /AISI USA     UNS GB     JIS Japan
Machining Steel     1.0718     11SMnPb30+C     -     -     -
Stainless Steel V2A     1.4305     X8CrNiS 18-9     S 30300     303     SUS 303
Stainless Steel V4A     1.4404     X2CrNiMo 17-12-2     S 31603     316L     SUS 316L
Brass MS 58     2.0401     CuZn39 Pb3     -     -     -

In line with customer requirements, we also manufacture grease nipples and turn parts from these
materials:
Descr.     Steel grade     DIN (Europe)     ASTM /AISI USA     UNS GB     JIS Japan
Machining Steel     1.0715     11SMn30     -     -     -
Stainless Steel V2A     1.4301     X5CrNi 18-10     S 30400     304     SUS 304
Stainless Steel V4A     1.4401     X5CrNiMo 17-12-2     S 31600     316     SUS 316
      1.4571     X6CrNiMoTi 17-12-2     S 31635     316 Ti     SUS 316 Ti

More materials available on request!
ASTM / AISI     (American Society for Testing and Materials / American Iron and Steel Institute)
UNS     Unified Numbering System for Metals and Alloys, mainly used in GB
JIS     Japan Industrial Standard

Minimum Order Quantity: 100000 Pieces

Hydraulic-type Grease Nipples

Hydraulic-type Grease Nipples

 

Application Area 

 

Rama Steel Products hydraulic-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. Due to their multi-purpose field of application, they are the most commonly used types of grease nipples.

 

 

Versions

 

In general, our hydraulic-type grease nipples according to DIN are made of steel, case-hardened, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm /0.256" - 0.008". For safety reasons and in order to avoid abrasion wear, the standard demands 550 HV as a minimum for a surface hardness. Therefore, we operate this decisive process in our own curing oven. We offer various standard types also in brass or stainless steel V2A/V4A. Of course, our hydraulic-type nipples are also available in different angle versions, with a self-forming thread, or as drive-in type.

 

 

Special Versions

 

Upon request, Rama Steel Products manufactures hydraulic-type nipples in other versions, with respect to e. g.

  • dimension
  • material
  • thread size
  • thread form (e. g. with cylindrical thread)
  • different opening pressure
  • surface colour (e. g. yellow passivated)
  • further surface treatment
  • unhardened
  • etc.

 

 

Mounting Instructions:

 

In order to allow for a proper lubrication with all common grease guns, the head space, which is necessary for installation, should be considered (please see table with dimensions).


 

 

Operating Instructions:

 

As suitable lubricating nozzle, we recommend our hydraulic couplers.

Product Code: DIN71412
Minimum Order Quantity: 100000 Pieces

Accessories For Grease Nipple

Accessories for Grease Nipple

To,Rama Steel Products

Promote Your Business with IndiaMART
Enter Your Website URL