Under the ShaktiSil range we offer silicate based cement mortar by the name of ShaktiSil 'K'. This Component system is based on potassium silicate and is available in the form of Shaktisol- K Solution and Shaktisil Powder. This qualitative cement is widely used for the purpose of beddding and fixing of acid resistance brick or tile lining in chemical industry for sulphuric acid more than 20% con.

Product	Characteristic	Application
SHAKTISIL ‘K’	Potassium Silicate based two component system – Shaktisol - K Solution Shaktisil Powder	For bedding and fixing of Acid Resistance brick/ tile Lining in chemical industry for sulphuric acid more than 20% conc.
SHAKTISIL ‘NA’	Sodium silicate based two component System – Shaktisol-Na Solution Shaktisil Powder	For bedding and fixing of Acid Resistance brick/ tile Lining in chemical industry for mild acid.

Request for Quotation

Resin cement mortar is made using different type of resins such as CNSL, phenolic, furane, epoxy and polyester and is largely used as acid resistant bedding and joint lining material in various industries depending on the chemicals handled.

Product	Characteristic	Application
SHAKTI RES-PH	Phenolic based two component system - Shakti Res - PH Resin Shakti Res-PH Powder	For bedding/jointing & pointing of AR bricks & tiles for acid & alkali resistant lining.
SHAKTI RES-EP	Epoxy based three component system - EP Resin, EP Hardner & EP-Powder	For bedding/jointing & pointing of AR bricks & tiles for mild acid & alkali resistant lining.
SHAKTI RES-  PO- I           PO- B           PO- V	Polyester based four component system - Shakti Res - PO Resin, Accelerator, Catalyst & Powder	For bedding/jointing & pointing of AR bricks & tiles for only acidic conditions viz. paper mill chest lining. Spl. material offered for acid/alkali resistance.
SHAKTI RES-FU	Furan based two component system - Shakti Res-FU Resin & Powder	For bedding/jointing & pointing of AR bricks & tiles for non-oxidising conditions with solvents.
SHAKTI RES-CNSL	Special CNSL Phenolic based Shakti Res–CNSL Resin and Powder	For bedding/jointing & pointing of AR bricks & tiles for acid & alkali resistant conditions without solvents.

Request for Quotation

The increasing realization of the limitation of concrete floorings & other types of floorings like Kota Stone, tile etc has resulted in widening usage of resionous floor coatings. Dusting due to the surface texture, cracks & porosity, seepage of oils leading to unappealing patches weakening of the reinforcement & concrete surface due to chemical spillages, possibilties of microbial growth are the significant drwabacks of concrete floors.

Product	Characteristic	Application
RANSEAL-EPDF	Epoxy based primer/ sealer Resin-Hardner.	As primer/ sealer for various applications (solvent free coating system)
RANFLOOR-EPHW	Epoxy based two components Hard wearing EPHW-Resin & Hardner.	Hardwearing epoxy flooring
RANFLOOR-EPSL	Epoxy based two component self levelling EPSL-Resin & Hardner.	Self levelling epoxy flooring
RANFLOOR-EPML & EPCR	Epoxy based two component EPML & EPCR- Resin & Hardner	Mono Lathic & Chemical resistance Epoxy flooring

Request for Quotation

We offer following anti corrosive industrial coatings :

RANGCOAT 'EP' BLACK

Epoxy Based two component system SCTE- Resin- Hardner

For Effluent Treatment Plants & Cooling Towers

Request for Quotation

Acid resistant bricks and tiles used as flooring, lining in many kinds of chemical reactors and tanks of acids and other chemicals in chemical factories, fertilizer factories, sulphuric acid factories and iron and steel plants. Also used as lining of antiseptic pools and ditches. We offer to our client’s acid resisting bricks as per IS 4457 & IS 4860.

Request for Quotation

We offer following mastics membranes :

Product	Characteristic	Application
Acid Resistance	Good resistance to mild Acids & Alkalies.	Used as membranes behind acid resistant brick/ tile lining. Also used as an industrial mastic for exposed condition where heavy movement is expected. Membrane for acid proof lining on floors and vertical areas without the use of mesh reinforcement
Anti- static	For Electrical conducting.	Used in places like Petroleum installation & LPG bottling plants where electrical discharge should not get accumulated.

Request for Quotation

Single pack high performance heat resistance Aluminum paint based on silicone resin medium for protection of steel at high temperature upto 600°C. It is used for coating on stacks, exhaust systems, kilns, incinerators etc. it gives brilliant luster with excellent corrosion resisting properties.

Request for Quotation

We offer following thermoplastic acrylic coatings :

Stone Care:

Single pack air drying toxic free thermoplastic acrylic based clear coating. It provides unique adhesion to stones including Marbles, Granite, Flagstone, Limestone, Travertine, Bluestone, Sandstone etc.

With the use of the detergent, acid or any type of agent for cleaning purposes it losses its natural beauty, luster & cracks are being observed on the surface. Due to chemical reactions on the surface it reacts & creates small pinholes & cracks.

With the application of our product i.e. “STONE CARE” on any type of stone it increase the luster/ protection against environment. STONE CARE is a unique coating that protects every stone and helps in retaining their beauty and natural appearance. As STONE CARE is eco friendly, toxic free, no reactions on bodily parts, it forms a protective layer on the top which seals the pores by bonding and thus resisting the floor from dirt and free from any type of reactions.


Handicrafts Top Coat:

Single pack component, air drying thermoplastic acrylic based clear coating. It provides unique adhesion to ferrous/ non ferrous metal. Tis U/V Resistance & Toxic Free.

Vaccum Metalizing Top Coat:

Single pack component, air drying thermoplastic acrylic based clear coating. It provides unique adhesion to ferrous/ non ferrous metal.

Request for Quotation

Over one and a half decade of abundant experience in this domain enables us to undertake the turnkey projects pertaining to acid resistance tile lining, epoxy floorings and epoxy coatings. These projects are meticulously accomplished by our team of expert professionals according to the set industrial benchmarks. Utilization of best quality of materials imparts to our projects compatibility to meet the specific requirements of our clients.

Request for Quotation

We offer clients efficient services for sand blasting & painting of rope way towers. Catering to the needs of diverse industries, our services are in sync with set standards. Our sand blasting services are used for smoothing, shaping & cleaning of hard surfaces by forcing solid particles across that surface at high speeds. Our services are immensely demanded to refurbish the buildings and create appealing art works. These services are executed by our team of experienced workers according to the requirements of our industrial clients.

Request for Quotation

We offer our clients waste management consultancy services for any type of rejected, surplus expired, slow moving and by-products. Our services are availed by large numbers of industries and provide them perfect solution for the efficient waste management. Our team of expert consultants has plenteous knowledge regarding the waste treatment of various industries. While providing these services, we keep in view the all aspects and requirements of our clients.

Request for Quotation

Polypropylene glass lining (PPGL) fabric is a very unique and special weave fabric. The fabric contains both polypropylene yarn and glass fiber yarn, the best advantage is it allows the user to have the maximum benefit of high chemical and corrosion resistance properties of fiber glass yarn along with improved mechanical properties of Polypropylene.

Request for Quotation