Vighnaharta Security brings to you yet another product range which will save energy and also provide security. Millions of lights are left ON in buildings (residential complexes, office buildings, factories, malls etc.) without any use. Our product ecoLuz (Sensor Light Switches) makes it possible to turn the lights on only when needed & off after the motion in completed. Apart from this energy saving aspect, it also offers a convenience that it is not needed to often switch ON or OFF the lights; it is in automatic operation. |
Ceiling Flush Mount Sensor Light | | Item Code: LS105 The product is a new saving energy switch adopting the good sensitivity detector, integrated circuit and SMT. It gathers automatic, convenient, safe saving energy and practical functions. It works by receiving human motion infrared rays. When one enters the detection field, it start the load at once and identify day and night automatically, it can be used with various types of lamps and lanterns. Specifications : Power Supply: 220-240V/AC Power frequency: 50Hz/60Hz Rated load: 800W Max.(GLS) 400W Max.(CFL, TL) Detection angle: 360° Time setting: (8±3)Sec-(8±3)Min Light-control: <10LUX~2000LUX (adjustable) Detection Range : 8 mtrs Max. Installation Height : 2.5~3.5mtrs General Functioning Starts functioning only when ambient light is below preset Switches ON lights on sensing motion Keeps lights ON till the motion is detected Turns OFF the lights after the set time Applications • Living Room
• Rest Room
• Corridor
• Lifts / Lift Lobby
• ATM’S
• Hospitals / Nursing Homes | 
 | | Send Enquiry | |
| Ceiling Mount Sensor Light Round |
| Item Code: LS29A The product is a new saving energy switch, it adopts good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, saving energy and practical functions. Three detectors inside compose a wide range detection field, it utilizes the infrared energy from human as control signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely . Specifications : Power Supply: 220-240V/AC Power frequency: 50Hz/60Hz Rated load: 1200w Detection angle: 360° Time setting: 5Sec– 12 Min Light-control: <20LUX~2000LUX Detection Range : 3-10mtrs ; IP code : 20 Installation Height : 2.5~3.5mtrs General Functioning Starts functioning only when ambient light is below preset Switches ON lights on sensing motion Keeps lights ON till the motion is detected Turns OFF the lights after the set time Applications
• Offices / Conference
• Toilets
• Pantry
• Stores / Stairways
• Lifts / Lift Lobby
• Dining Area / Canteen
• Basement / Covered Parking Area
• Locker /Safe Room in banks/ Vaults
• ATMs - Colleges/ Schools/ Institutes
• Multi- Apartment Complexes
• Hospitals /Nursing Homes
• Malls And many more places | | Send Enquiry |
Modular Sensor Light | | Item Code: LS2000 It is a new generation infrared sensor developed by our long term market forecast and investigation. It has strong stability, it gathers multifunction, practical good appearance, wide working voltage, convenient installation, detection indication, multi working mode etc. It keeps the lights on by detecting the sound. It adopts
SMT technique. It is accorded with European standard, It is suitable for automatic control for home, hotel and enterprises. Specifications : Power Supply : 220-240V/AC Power frequency: 50Hz/60Hz Rated load: 500W Max. (GLS) Detection angle: 140° Time setting: 5Sec-7Min Light-control: <3LUX~1000LUX (adjustable) Detection Range - 12 mtrs IP :20 General Functioning Starts functioning only when ambient light is below preset Switches ON lights on sensing motion Keeps lights ON till the motion is detected Turns OFF the lights after the set time Applications Office Meeting Room Hallway Toilet Stairways School Living Room Lockers / Safe Room |
| | Send Enquiry | |
| Ceilng Flush Mount Sensor Light Round |
| Item Code: LS206 The LS206 360° flush mount motion sensor uses a passive infrared sensor which reacts to changes in temperature emitted by the motion of persons or objects passing through its detecting area. When you enter the room, it turns on automatically the light to which it is connected and the light remains lit as long as the sensor detects any activity in the room. It however will automatically turn off the light after the preset turn-off time is expired. It can identify day and night automatically. With this sensor installed, you get rid of the nuisance of fumbling in a dark hallway or staircase for a light switch, thus avoiding danger for the elderly, infirm and children at night or when it is dark. Specifications : Power Supply: 220-240V/AC Power frequency: 50Hz/60Hz Rated load: 2000W Max.(GLS) 1000VA Max.(CFL, TL) Detection angle: 360° Time setting: 3Sec – (Adjustable)40 Min Light-control: <5LUX~1000LUX Detection Range : 3-7mtrs ; Installation Height : Typically 3 mtrs
IP : 20 GENERAL FUNCTIONING
Starts functioning only when ambient light is below preset Switches ON lights on sensing motion Keeps lights ON till the motion is detected Turns OFF the lights after the set time APPLICATIONS
• LIVING ROOM
• REST ROOM
• CORRIDOR
• LIFTS / LIFT LOBBY
• ATM’S
• HALL WAY | | Send Enquiry |
Ceiling Mount Sensor Light | | Item Code: LS912R Passive Infra Red Light Switch is a user friendly electronic gadget that can play a vital role in ENERGY SAVING by eliminating manual control on application lighting. Its sleek and easy to adjust interface can help user to trim gadget to application suitable output. It is a quad element sensor which detects the slightest motion in the field. One can adjust ON-time, LUX Trip level and Sensitivity at a trip of screw driver for well groomed and dependable performance.
Specifications :
PIR Sensor : Quad element
Power Supply: 220-240V/AC
Power frequency: 50Hz/60Hz
Rated load: 1200W Max. (GLS Lamp)600W Max. (CFL, TL)
Detection angle: 360°
Time setting: 20Sec– 20 Min
Light-control: <10LUX~2000LUX (adjustable)
Detection Range—3-12mtrs
Resettable Fuse,
Precise Setting.
General Functioning
Starts functioning only when ambient light is below preset
Switches ON lights on sensing motion
Keeps lights ON till the motion is detected
Turns OFF the lights after the set time
Applications
• Offices / Conference
• Toilets
• Pantry
• Stores / Stairways
• Lifts / Lift Lobby
• Dining Area / Canteen
• Basement / Covered Parking Area
• Locker /Safe Room in banks/ Vaults
• ATMs - Colleges/ Schools/ Institute |
| | Send Enquiry | |
| Ceiling Mount Sensor Light |
| Item Code: LS908E Passive Infra Red Light Switch is a user friendly electronic gadget that can play a vital role in ENERGY SAVING by eliminating manual control on application lighting. Its sleek and easy to adjust interface can help user to trim gadget to application suitable output. It is a dual element sensor which gives you a better result. One can adjust ON-time, LUX Trip level and Sensitivity at a trip of screw driver for well groomed and dependable performance.
Specifications :
PIR Sensor : Dual element
Power Supply: 220-240V/AC
Power frequency: 50Hz/60Hz
Rated load: 1200W Max. (GLS Lamp)600W Max. (CFL, TL)
Detection angle: 360°
Time setting: 20Sec– 20 Min
Light-control: <10LUX~2000LUX (adjustable)
Detection Range—3-8mtrs
General Functioning
Starts functioning only when ambient light is below preset
Switches ON lights on sensing motion
Keeps lights ON till the motion is detected
Turns OFF the lights after the set time
Applications
Use with Tube lights, CFL, Incandescent Lamps, LED, Halogen.
Use in Passage, Parking, Leaving Room, Office, Toilets, Staircases, Elevators etc.
Use for Air Conditioners.
Living Room
Rest Room
Model is very useful in the indoor applications. | | Send Enquiry |
Halogen Sensor Light With Video Camcorder | | Item Code: LS603-3 Your Smart Safe CAM is a unique surveillance system for your home or business. At night, the built- in passive infrared (PIR) motion sensor turns on the light when it detects motion in its coverage area, so that camera images can be clearly seen. During the day, the built-in photocell sensor saves electricity by deactivating the light. Built-in SD card slot for additional storage, accept memory storage up to 32GB. Pre-recorded function allows you to trace event happening, and customized sound recording is available at your
disposal. The Smart Safe CAM is compatible with O-Net product and can be controlled by remote controller. The unit is designed for indoor/outdoor use.
Specifications :
Power Supply: 220-240V/AC
Detection angle: 150°
Detection Range :12 Mtrs max
24frame, 4G lens, 640x480 pixel true VGA, MPEG4 format
10sec. Pre-recording plus 20sec. Video file
More features incl. Year/Date/Time stamp, error install reminding sound, SD card smart detect
and write protect switch, 2 default and 2 recordable alert sounds for selection, 4 scenes mode
selectable. IP 54.
General Functioning
Starts functioning only when ambient light is below preset
Switches ON lights on sensing motion
Keeps lights ON till the motion is detected
Turns OFF the lights after the set time
Applications
• Company Back yards
• Bungalow Premises
• Construction Sites
LS604-3 : with MJPEG Slide Show
Specifications :
PIR Sensor : Dual element
Power Supply: 220-240V/AC
Power frequency: 50Hz/60Hz
Rated load: 300W Max.
Detection angle: 150°
Time setting: 20Sec– 5 Min
Light-control: Yes
Detection Range : 12mtrs Max
IP : 44
|
| | Send Enquiry | |
|
|
© Realty Automation & Security Systems Pvt. Ltd.. All Rights Reserved (Terms of Use)