We manufacture wide range of conveyor belt fasteners which are also known as solid plate type belt fasteners. These are of premium quality, highly effective and safe to use. These conveyor belt fasteners are manufactured in 9 sizes and are fabricated to meet the growing demands of toughest material handling applications. We offer belts in varied sizes from 3/16" (5 mm) to over 15/16" (24 mm) thick. The market applications of these belts are:

• Sand
• Gravel
• Crushed stone
• Grain
• Coal
• Cement
• Salt

The specifications of our belts are:
   

Fastener size	Belt Thickness range		For Beelt with mechanical fastener rating up to		Recommended Minimum Pulley Diameter (Operating Tension 75% -100% of Belt Rating)
	in	mm	P.I.W	kN/M	in.	mm
1	3/16-7/16	5-11	150	30	12	300
140	3/16-7/16	5-11	225	40	14	350
190	5/16-9/16	8-14	330	60	18	450
11/4	1/4 to 3/8	8 to 12.5	300	50	14	350
1-1/2	7/16-11/16	11-17	300	50	18	450
2	9/16-13/16	14-21	440	75	30	750
2-1/4	9/16-1-3/16	14-30	620	105	36	900
2-1/2	3/4-1	19-25	450	75	42	1050
3	15/16 & Over	24 & Over	560

We are engaged in manufacturing elevator bolts which is known for its effectual working among our valued clients. These eelvator bolts are also known as ref 70 bolts. Furthermore it is manufactured in compliance of necessary standards and can be delivered within given time frame. Some of its noteworthy features are :

• Concave Head with 4 lugs in the underside to prevent rotation when tightening
• Hexagon nut and Small flat washer included
• Available in Whitworth or Metric Thread

We offer euro bolts which is highly appreciated for its longevity and abrasion resistant feature. Advanced machinery is used in the production . These euro bolts can be easily customized according to client requirement. It has following features:

• Large Bolt Head Diameter
• Fully Threaded
• Zinc Plated as standard or stainless
• Available in Metric Thread

For steel buckets with recessed hole we use:-

• Bolt, Hexagon Nut
• Small Flat Washer

For plastic buckets we use:

• Bolt, Hexagon Nut
• Large Flat Washer

We manufacture sabre tooth bolts which is renowned for its effective functioning among our valued clients. These tooth bolts are extensively used in varied industries and is highly appreciated for its abrasion resistant feature. These tooth bolts are manufactured in accordance of required standards and can be delivered within given time frame. Some of its features are:

• Square Shoulder under the head
• Two Teeth under the bolt head to Prevent the bolts from turning while fastening the nuts
• Available in With Worth & UNC Thread

We are engaged in manufacturing fang bolts which is widely acclaimed for its durability and corrosion resistant features. These fang bolts have unique design which bites into the belt and helps in locking bolt in place while nut is tightened. These fang bolts ease the fitting and helps in removal of nut.  These fang bolts can be easily customized as per client requirement and is manufactured in accordance of necessary standards. It has following features :

• Large bolt head diameter = Maximum resistance to pull through
• Flat bolt head - Pulls fully flush into belt - reduces risk of rip out of bolt due to head protruding from back of belt
• Suitable for recessed or non recessed bolt holes
• Ideal for CC-S Buckets
• Available in Metric & UNC Thread

We are engaged in manufacturing wheel dresser cutters which is also known as colle Huntington type emery wheel dresser cutters. High grade quality of raw material is used in the production of our gamut which includes carbon steel. These wheel cutters can be easily customized as per client requirement and can be delivered on time. Some of its specifications are:

• Available in size 0, 1, 2
• Hardened & Temperd

We manufacture screw extractors which is highly appreciated for durability and corrosion resistant features. For extracting the broken screw, drill a hole in the screw and then insert the largest possible screw extractor and then turn anti-clockwise. Then corkscrew teeth will release the broken screw, leaving the original thread in the hole undamaged. It is manufactured in compliance of necessary standards and can be delivered within stipulated time frame. We offer drills of varied sizes which include :

• Drill Size 'A'-: For screw or studs of low or medium tensile strength
• Drill Size 'B'-: For screw or studs of high (75 tons/sq. in .or over) tensile strength

It has following specifications :
   

Screw	Drill to Use		Extractor
	A	B
1/8 & 3/16'	5/64"	5/64"	1
1/4	7/64"	1/8"	2
5/16 & 3/8"	5/32"	11/64"	3
7/16'	7/32"	15/64"	4
1/2 & 9/16"	9/32"	5/16"	5
5/8 & 3/4"	13/32"	7/16"	6

We are engaged in manufacturing marking punches (number punches) which is manufactured from best quality of alloy steels. These marking punches are duly hardened and tempered & every punch is marked with same number and letter. These marking punches are manufactured in accordance of necessary standards and can be delivered on time. Some of its features are:

• Hardness: - 50 HRC to 58HRC
• Punches are supplied in sets & all sets are  packed in convenient plastic boxes
• Face of the punch should be normal to face of work so that a clear impreesion is obtained
• Punches should be used on unhardened materials
• Punches are fully guaranteed for quality & excellence

It has following specifications:
   

Character Size		Steel Sq.Size	Length of Stick	Weight ( Approx ) Inclusive Plastic Boxes
INCHES	MM	MM	MM	Figure Set	Letter Set
1/32"	0.8	6mm	65mm	200 gms.	580 gms.
1/16"	1.5	6mm	65mm	200 gms.	580 gms.
5/64"	2.0	6mm	65mm	200 gms.	580 gms.
3/32"	2.5	6mm	65mm	200 gms.	580 gms.
1/8"	3.0	8mm	70mm	300 gms.	900 gms.
5//32"	4.0	8mm	70mm	300 gms.	900 gms.
3/16"	5.0	9.5mm	70mm	450 gms.	1.350 Kgs
1/4"	6.0	11mm	70mm	610 gms.	1.800 Kgs
9/32"	7.0	12mm	70mm	720 gms.	2.100 Kgs
5/16"	8.0	12mm	70mm	720 gms.	2.100 Kgs
11/32"	9.0	16mm	80mm	1.450 gms.	4.100 Kgs
3/8"	10.0	16mm	80mm	1.450 gms.	4.100 Kgs
1/2"	12.0	18mm	80mm	1.900 gms.	5.500 Kgs

     

We manufacture diamond dressers which is appropriate tool for dressing wheels for surface grinders, universal grinders and many more. It is manufactured in compliance of necessary standards and can be easily modified as per client requirement. Some of its noteworthy features are:

• High Quality Diamonds
• Available in any Shank Size
• Beautiful Chrome Finish
• Moderately Priced

We offer steel belt lacing (alligator type) which is a one piece fastener strip which make sure that there are no loose pieces to work themselves out of the belt and into the conveyed product. It is specifically designed for belts ranging from 1/32" (.8 mm) to 1/2" (12.5 mm) and also it doesn’t require any special tools, only a hammer. In this lacing is secured with teeth that embed lengthwise on the belt providing a strong hold. Clips hold gauge rod and lacing firmly against the belt which ensures a strong and straight splice also helps in easing the hinge pin insertion.
 
It has following specifications :
 

Lacing size	For belts with mechanical fastener rating up to		Belt Thickness range		Recommended Minimum Pulley Diameter		No/Sets Per Box	Strip Length
	P.I.W	kN/m	in	mm	in	mm
15	65	11.4	1/8-5/32	3.2-4.0	2-1/2	64	8 set Per Box	255mm
20	95	16.6	5/32-3/16	4.0-4.8	3	76	5 set Per Box	288mm
25	100	17.5	3/16-7/32	4.8-5.6	4	102	8 set Per Box	288mm
27	100	17.5	7/32-9/32	5.6-7.1	5	127	8 set Per Box	288mm
35	150	26	9/32-5/16	7.1-7.9	7	178	4 set Per Box	288mm
45	165	28	5/16-3/8	7.9-9.5	9	229	4 set Per Box	288mm
55	175	30	3/8-7/16	9.5-11.1	12	305	4set Per Box	288mm
65	200	35	7/16-1/2	11.1-12.7	14	356	5 set Per Box	288mm

We offer hex key wrenches which is known for its effectual working among our valued clients. Superlative quality of alloy steel is used as a raw material in the production of our renches. It has the hardness of 50 HRC which is in accordance of international standard for high tensile strength. These hex key wrenches can be easily modified as per client requirement and can be delivered within given time frame. It has following features :

• Available in Black oxide finish along with the protective coating of rust preventive oil
• Available in size 1.5mm to 32mm & 1/16 to 1"
• Available in loose packing as well as sets
• Allen key Sets are available in pouch packing and in plastic holder with blister packing in option of 10 Pcs. or 8 Pcs. Set
• Also Available T-Handle Type Allen keys

We offer carbide tipped masonry drills which is extensively used in bricks, plaster, stone and concrete. These carbide tipped masonry drills are duly hardened and tempered and has specialized crome and zinc plating. It is manufactured in accordance of required standards and can be delivered within given time frame. It has following features:

• Available in size 1/8 to 1" in standard & 12" length
• Allen key in pouch & pipe packing
• No need to sharp the tips