We offer a superior range of Induced Draft Type Evaporating Condenser that is fabricated by our group company Uma industries. The condenser includes a hot water basin and an annular outer structure comprising of self stabilized towers. Each tower consists of a pair of radial sides.  On the other hand the hot water basin has various annular sections that are supported on beams. The annual sections by expansion joints are then aligned with the radial sides and spaced from one another.  

We offer precision engineered Forced Draft Type Evaporating Condenser that is considered as one of the prime heat exchange equipment for refrigeration system. The evaporating condenser to take latent heat of condensation at the time of refrigeration liquefaction adopts water latent heat of vaporization. Availability of strong wind power of induced-draft fan makes equable spraying of water laminate on boil surface. With the help of the fan water in PVC heat exchange layer is cooled and flows into gully after temperature fall.  By circulating water pump for continuous circulating, the water is therefore pushed into spraying system.  

We offer suitable range of Ammonia Product Coolers for Cold Storages. They have much more reliable results as compared to the propylene glycol. Our product also eliminates the power needed to pump the glycol. Our ammonia coolers is also available with the surge drum and brackets for mounting above the cooler.

We offer a well designed Skid Mounted Refrigeration Units that provide absolute trouble free services. Our units are also very efficient are extensively used for chilling plants & dairy plants.

Salient Features:

• Energy saving and highly efficient fin tube air cooling condensers with liberal sized fans
• Guaranteed cooling capacity at rated parameters
• Hermentic, semi hermentic sealed, screw compressors with internal load protection
• Air cooled condensers with copper tubes and aluminum fins
• Refrigerant circuit comprises of filter dryer, thermostatic expansion valve/capillary, sight glass, accumulator and many other controls from Danfos, Sporlan and Alco etc.
• Available with number of safety devices such as high and low refrigerant switched, flow switches, low

We offer precision engineered Skid Mounted Type Refrigeration Unit that is skid mounted and fully factory assembled. The unit is extensively used for instrumentation, piping and other electrical component related works. All sized unit follows the similar process flow.

The basic system consists of the following components:
 

• Inlet/outlet gas interchanger
• Separator
• Gas chiller
• Methanol injection pump (if required)
• Refrigeration compressor,
• Electric or gas engine drive
• Liquid product booster pump (if required)
• Refrigerant condenser, air cooled
• Cryogenic refrigeration system
• Electrical and control systems
• Emergency shutdown system

Chemical injection pumps, separator, chiller, stabilizer column are some of the other components of the Skid Mounted Type Refrigeration Unit.

We offer a suitable range of PHE Glycol Chiller that is widely used for Brewery Industry. Our Glycol chiller systems have the ability to maintain the walk-in cooler temperature and deliver cold beer up to 500.  

Power Pack
The power pack and a refrigeration unit chilling food grade anti-freeze (glycol) is said to be the heart of a glycol system. Power packs run between the keg and the faucet and are sized for the length.

Glycol
Our range of act as a lubricant and have a prolonged pump that has a life on the power pack unit. The glycol is mixed with 2-1/2 gallons of water and for optimum performance is flushed and re-filled on an annual basis.

Trunk Line
Also known as python, our range of trunk line bears the following components and layers:

• Beer Line
• Glycol Line
• Moisture Barrier Wrap
• Foil Wrap
• Insulation
• Outside Barrier Jacket
• Installation Equipment

We offer self-contained and easily installed range of Condensing Unit for Carbon Di Oxide Liquefaction Plant that boast of the following features:

• Compact design
• Space saving
• Fan guard
• High efficiency PSC fan motors
• Copeland (H/E/L), Bristol R22 (H) or Maneurop R404A/R507 (M/L) hermetic compressors
• Enhanced tube condenser coil
• Copper tubing secured with cushion clamps
• Adjustable low (1 HP and below) or high/low pressure control
  (above 1 HP)
• Receiver outlet valve
• Flooded head pressure control (standard on outdoor models)
• Crankcase heater (standard on outdoor models)

We offer a suitable range of Carbon Di Oxide Liquifier that are available in various dimensions and are designed as per the specifications of our clients. Some of the major components of our liquefier encompass:

• Piston compressors
• Oil-bearing expansion turbines
• Liquifier cold box
• Liquid nitrogen pre cooling
• Hydrogen purification
• Raw gas compressors
• Storage tanks and filling devices

The use of carbon di oxide liquifier serves several advantages such as:

• Without expensive additional pipelines an improve range of services can be offer.
• The load factors of the existing pipelines can also be increased.
• The distributed capacitance and/or peaks having integration with refueling networks is also possible by the use of co2 liquifiers.

 Liquefier serves the following application areas:

• Separation of a mixture of gases
• NMR medical imaging
• Rocket

We offer a comprehensive Refrigeration System for Brewery Industry. The various applications are approached in three different ways such as:

• Field built-up systems
• Factory assembled packaged refrigeration systems
• A combination of both

For deciding amongst these three approaches a combination of the following refrigeration system components can be utilized:

• Reciprocating compressors
• Screw compressors
• Rotary vane compressors
• Electric motors
• Gas engine drives
• Diesel engine drives
• Water cooled condensers
• Evaporative condensers
• Air cooled condensers
• Fan-coil air cooling units
• Fan-coil air blast freezing units
• Shell and tube heat exchangers
• Shell and tube chillers
• IQF tunnel freezers
• Spiral conveyor freezers
• Plate freezers
• Blast cell freezers
• Ice maker machines
• Ice conveyor systems
• Jacketed tank coolers
• Inter-coolers
• Economizers
• Accumulator pump tanks
• Receiver vessels
• Suction traps
• Control valves
• Safety devices
• Electric controls
• Computer controls
• Service valves
• Various insulation materials
• For unitanks cooling we offer NH3 / Freon based glycol chilling plants
• For Wort cooling we have NH3 / Freon based chilled water systems
• For breweries we have NH3/ Freon based CO2 Liquification systems

 

We offer suitable range of Liquid  Accumulator from Ammonia Overfeed System that is widely used to serve industrial ammonia refrigeration applications. In addition to this, our alternative gas-driven system that is used with the refrigerant vapor pressure to re circulate the liquid refrigerant through the evaporator in order to avoid maintenance of a pump, its bearings and seal.

The usage of gas-driven system has a great advantage as it employs one central vessel (an accumulator) for all evaporators on a common suction system. Also in this system no pumps are used and also maintenance costs are reduced. The configuration provides:

• Protection for the compressor it offers liquid refrigerant slop-over protection for the compressor.
• With an optimum liquid feed to evaporator to load demand, it increases the utilization of evaporator's internal heat transfer surface.