We are specailized in mnaufacturing precision engineered hot air oven, which can be availed
as per specific requirement of client.

Specification

Work Space	0.5 X 0.5 X 0.5 Mt to 2 X 2 X 2 Mt
Temp Range	Ambient + 10 to 200 Deg . C
Temp. Tolerance	+/ - 1 Deg . C
Temp. Control	By Digital Temp. Controller
Temp. Sensor	PT 100
Power	230 / 440 VAC
Construction	Double wall type with:
Interior	20 swg CRCA sheet with Aluminium Paint
Exterior	20 swg CRCA sheet with powder coating
Insulation	100 mm Glass wool
Door	Full front opening,double walled
Gasket	Heavy duty for leak proofness
Hinges & Locks	Heavy duty
Mounting	Trolly mounting with castors

This oven is offered by us in different dimensions with thermostatic temperature control. Its inner chamber is made using mild steel and aluminium. It has a double wall construction with glass wool insulation. Our oven has an accuracy of + / - 3° C and a temperature range of 5° C to 200° C.
Following dimensions are provided by us:
INTERNAL DIMENSIONS HEATERS

• 300 X 300 X 300 mm 500W


• 300 X 300 X 450 mm 500W


• 450 X 450 X 450 mm 1000W


• 450 X 450 X 600 mm 1500W


• 600 X 600 X 600 mm 2000W

We manufacture dry heat chambers. The systems provided in this heat chamber are described below:

1	Work Space	0.5 x 0.5 x 0.5 mt to 1 x 1 x 1 mt
2	Temp Range	Ambient + 10 to 100°C.
3	Temp. Tolerance	± 1°C
4	Temp. Control	By Digital Temp. Controller
5	Temp Sensor	PT 100
6	Power	230 /440 VAC

1. PID Controller.
2. Port holes of 25 mm dia for specimen wiring.
3. Chamber On Delay Timer.
4. Specimen trays.

We manufacture Humidity Chambers. The systems provided in this Humidity Chamber are described below:

1	Work Space	0.5 x 0.5 x 0.5 mt to 1 x 1 x 1 mt
2	Temp Range	+ 10 to 100°C.
3	Temp. Tolerance	± 1°C
4	Temp. Sensor	PT 100
5	Temp Control	By Digital Temp. Controller for Dry & Wet Bulb
6	Humidity	95±3% in temp. Range 25 to 60°C

1. PID Controller
2. Inspection window with two Pane Glass, Heater & Lamp
3. Port holes of 25 mm dia for specimen wiring
4. Chamber On Delay Timer
5. Specimen trays.
6. Electrical terminals through wall.

We are engaged in manufacturing precision engineered cold chamber, which are widely used in various engineering based appplications.

Specification

Work Space	0.5 X 0.5 X 0.5 Mt to 1X1 X 1Mt
Temp Range	Ambient to - 40 Deg .C
Temp. Tolerance	+/-1 Deg. C
Temp. Control	By Digital Temp. Controller
Temp. sensor	PT 100
Power	230 / 440VAC
Construction	Double wall type with
Interior	20 swg stainless steel
Exterior	20 swg CRCA sheet with powder coating
Insulation	100 mm Glass wool
Door	Full front opening ,double walled
Gasket	Heavy duty for leak proofness
Hinges & Locks	Heavy duty
Mounting	Trolly mounting with castors

Systems provided: Air circulation Systems :-Heavy duty maintenance free motor along with suitable Fan/Impeller is provided to maintain uniform Temp. in the work space.

Refrigeration System: A single / double stage refrigeration system has been provided
to pull down the work space temp. as desired. Hermetically sealed compressor of
suitable capacity with air cooled condenser &evaporator. Ozone friendly refrigerant is
used. The system will be mounted on the bottom of the chamber. The has been designed
for continuous & trouble free operation.

Optional features:

• PID Controller
• Inspection window with Two Pane Glass, Heater & Lamp.


• Port holes of 25mm dia for specimen wiring.
• Chamber On Delay Timer. 5.Specimen trays.


• Electrical terminals through wall

Our burn in chamber has found utility in different applications across various industries like rubber, automobile, electronic and glass etc. It is provided with interactive safety devices with MCB and audio visual indication. The systems provided in this Burn In Chamber are described below:


TD>230 /440 VAC

1	Work Space	0.5 x 0.5 x 0.5 mt to 1 x 1 x 1 mt
2	Temp Range	Ambient + 10 to 80°C.
3	Temp. Tolerance	± 1°C
4	Temp. Control	By Digital Temp. Controller
5	Temp Sensor	PT 100
6	Power

1. PID Controller.
2. Inspection window with two Pane Glass & Lamp.
3. Port holes of 25 mm dia for specimen wiring.
4. Chamber On Delay Timer.
5. Specimen trays.

Range : 0.5 Tonnes to 5.0 Tonnes
Application : Die – Mould Chilling / Oil Chilling / Chemicals Chilling etc.
We are specailized in offering high quality Water Chiller, which compromises of stainless stell storage trank as well as refrigration systems, whuichg consists of hermetically sealed compressor with air condenser and static type evaporator. The entire unit is fabricated and housed in M.S Square pipe frame with CRC power-coated panels and locks, mounted on heavy duty castors for ease of mobility.

Controls and Protections:

• Single Phase Preventor provided to avoid single phasing. (Only for 3 phase system)


• L.P switch: switches OFF the compressor, in case of any low pressure develops in refrigeration system.


• H.P. Switch: switches OFF the compressor, incase of any low pressure develops in refrigeration system.


• Solenoid valve: Ensures fast equilisation of Refrigerant. ON
• delay timer: To protect compressor from overloading during operation.


• M.C.B"s : To protect entire unit / control circuit / water – pump.


• Water-level controller: To ensure minimum water level.
• Temperature Indicator controller: Display and control the set temperature.(Range ambient to 6°c)


• Temperature Indicator: To monitor return water temperature.
• Water filter: Filters the return water.