The RDM-T24FZ is a low-cost 2.4 GHz transceiver designed for very low powerwireless applications. The circuit is mainly intended for the 2400-2483.5 MHZ ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band.
The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kbps. RDM-T24FZ provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of RDM-T24FZ can be controlled via an SPI interface.
A 4-wire SPI serial interface is used for configuration and data buffer access.
Features:
Covers over a range of 100 meters line of sight
Standard Frequency: 2.4 GHz
SPI Interface
Programmable Output power and Frequency
Supports Frequency Hopping
Very High Input Sensitivity of -104 dBm
Support all modulations
Single board Transceiver
Wide operating voltage of 1.8V to 3.6V DC
Low power consumption
Programmable data speed of up to 500 kbps
Optional automatic whitening and dewhitening of data
Wake-on radio functionality for automatic low-power RF polling
CSMA-CA protocol to avoid false triggers and collisions among devices operating in the same frequency
Benefits:
No RF skills required by the customer
Ideal choice for ultra low power wireless applications
Can accommodate many RF solutions due to customizable data speed, frequency and output power and advanced digital features and protocols
Easy to integrate with any microcontroller
Complete solution support offered to integrate with any microcontroller
Applications:
Low cost wireless data transfer
Wireless medical applications
Remote control/security systems
AMR - Automatic Meter Reading
Wireless sensor networks
Keyless entry
Home automation
Process and building control
Automotive systems
Active RFID solutions
Dimensions: 4.1 x 3.2 x 0.5 (L x W x H in cms) Accessories: Antenna up to 3 dBi gain
Other Information:
Similar RF Modules are available in other ISM band frequencies. The part numbers are:
RDM-T3FZ - RF Transceiver Module in 315 MHz (+10 dBm)
RDM-A4FZ - RF Transceiver Module in 433 MHz (+13 dBm)
RDM-T4FZ - RF Transceiver Module in 433 MHz (+10 dBm)
RDM-T8FZ - RF Transceiver Module in 868 MHz (+10 dBm)
RDM-T9FZ - RF Transceiver Module in 915 GMz (+10 dBm)
The RDZM-T24FZ is a second generation Zigbee® / IEEE 802.15.4 RF Transceiver Modules for the 2.4 GHz unlicensed ISM band. This chip enables industrial grade applications by offering state-of-the-art selectivity / co-existence, excellent link budget, operation up to 125oC and low voltage operation.
In addition, the RDZM-T24FZ provides extensive hardware support for frame handling, data buffering, burst transmissions, data encryption, data authentication, clear channel assessment, link quality indication and frame timing information. These features reduce the load on the host controller.
The excellent coverage and low power consumption makes it an ideal choice for many applications. In a typical system, the RDZM-T24FZ will be used together with a microcontroller and a few additional passive components.
Features:
Excellent coverage of 400 meters line of sight
2.4 GHz with Zigbee® / IEEE 802.15.4 RF transceiver
Programmable output power of up to +5 dBm
Supports digital RSSI frequency hopping and CSMA-CA protocol
Excellent receiver sensitivity (-98 dBm)
Single board transceiver with SPI interface
Wide operating voltage of 1.8V to 3.8V DC
Low power consumption. Less than 1µA in power down mode
Programmable data rate of up to 250 kbps
RoHS compliant
Benefits:
World-wide compliance
Cutting-edge Zigbee® technology
State-of-the-art selectivity/co-existence
No RF skills required by the customer
Ideal choice for ultra low power wireless applications
Advanced features
Easy to integrate with any microcontroller
Complete solution support offered to integrate with any microcontroller
Applications:
IEEE 802.15.4 systems
Zigbee® systems
Industrial monitoring and control
Home and building automation
Automatic Meter Reading
Low-power wireless sensor networks
set-top boxes and remote controls
Consumer electronics
Dimensions: 4.1 x 3.2 x 0.5 (L x W x H in cms) Accessories: Antenna up to 3 dBi gain
The RDM-T3FZ is a low-cost sub 1 GHz transceiver designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band 315 MHz, but can easily be programmed for operation at other frequencies in the 387-464 MHz band.
The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kbps. RDM-T3FZ provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of RDM-T3FZ can be controlled via an SPI interface.
A 4-wire SPI serial interface is used for configuration and data buffer access. Features:
Covers over a range of 500 meters line of sight
Standard Frequency: 315 MHz
SPI Interface
Programmable Output power and Frequency
Supports Frequency Hopping
Very High Input Sensitivity of -111 dBm
Support all modulations
Single board Transceiver
Wide operating voltage of 1.8V to 3.6V DC
Low power consumption
Programmable data speed of up to 500 kbps
CSMA-CA protocol to avoid false triggers and collisions among devices operating in the same frequency
Benefits:
No RF skills required by the customer
Ideal choice for ultra low power wireless applications
Can accommodate many RF solutions due to customizable data speed, frequency and output power and advanced digital features and protocols
Easy to integrate with any microcontroller
Complete solution support offered to integrate with any microcontroller
Applications:
Low cost wireless data transfer
Wireless medical applications
Remote control/security systems
AMR - Automatic Meter Reading
Wireless sensor networks
Keyless entry
Home automation
Process and building control
Automotive systems
Active RFID solutions
Dimensions: 4.1 x 3.2 x 0.5 (L x W x H in cms) Accessories: Antenna up to 3 dBi gain
Other Information:
Similar RF Modules are available in other ISM band frequencies. The part numbers are:
RDM-A4FZ - RF Transceiver Module in 433 MHz (+13 dBm)
RDM-T4FZ - RF Transceiver Module in 433 MHz (+10 dBm)
RDM-T8FZ - RF Transceiver Module in 868 MHz (+10 dBm)
RDM-T9FZ - RF Transceiver Module in 915 MHz (+10 dBm)
RDM-T24FZ - RF Transceiver Module in 2.4 GHz (+1 dBm)
The RDM-T4FZ is a low-cost sub- 1 GHz transceiver designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band 433 MHz, but can easily be programmed for operation at other frequencies in the 387-464 MHz band.
The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kbps. RDM-T4FZ provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of RDM-T4FZ can be controlled via an SPI interface.
A 4-wire SPI serial interface is used for configuration and data buffer access. Features:
Covers over a range of 500 meters line of sight
Standard Frequency: 433 MHz
SPI Interface
Programmable Output power and Frequency
Supports Frequency Hopping
Very High Input Sensitivity of -111 dBm
Support all modulations
Single board Transceiver
Wide operating voltage of 1.8V to 3.6V DC
Low power consumption
Programmable data speed of up to 500 kbps
CSMA-CA protocol to avoid false triggers and collisions among devices operating in the same frequency
Benefits:
No RF skills required by the customer
Ideal choice for ultra low power wireless applications
Can accommodate many RF solutions due to customizable data speed, frequency and output power and advanced digital features and protocols
Easy to integrate with any microcontroller
Complete solution support offered to integrate with any microcontroller
Applications:
Low cost wireless data transfer
Wireless medical applications
Remote control/security systems
AMR - Automatic Meter Reading
Wireless sensor networks
Keyless entry
Home automation
Process and building control
Automotive systems
Active RFID solutions
Dimensions: 4.1 x 3.2 x 0.5 (L x W x H in cms) Accessories: Antenna up to 3 dBi gain
Other Information:
Similar RF Modules are available in other ISM band frequencies. The part numbers are:
RDM-A4FZ - RF Transceiver Module in 433 MHz (+13 dBm)
RDM-T3FZ - RF Transceiver Module in 315 MHz (+10 dBm)
RDM-T8FZ - RF Transceiver Module in 868 MHz (+10 dBm)
RDM-T9FZ - RF Transceiver Module in 915 MHz (+10 dBm)
RDM-T24FZ - RF Transceiver Module in 2.4 GHz (+1 dBm)
The RDM-A4FZ wireless module is a low power, highly integrated transceiver designed for operation in the ISM frequency bands. This RF module allows the user to set the operating frequency anywhere between 432 MHz and 438 MHz with complete firmware control. Wide range of data rates and deviation frequencies are supported by this wireless module which makes it the unique choice for many applications which require low cost and high performance.
The typical range covered by this module is over 1000 meters line of sight. This module supports multiple modulations and frequency hopping. The module is capable of supplying CLOCK to the microcontroller, thus making a complete wireless system. By using a single low cost external microcontroller, this module could be indispensable for price-sensitive and area-sensitive applications.
Features:
Covers over a range of 1000 meters line of sight
Standard Frequency: 433 MHz
Programmable Output power and Frequency
Supports Frequency Hopping
Very High Input Sensitivity
Support all modulations
Single board Transceiver
Wide operating voltage of 2.3V to 3.6V DC
Low power consumption
Programmable data speed of up to 200 kbps
CSMA-CA protocol to avoid false triggers and collisions among devices operating in the same frequency
Benefits:
No RF skills required by the customer
Can accommodate many RF solutions due to customizable data speed, frequency and output power
Easy to integrate with any microcontroller
Complete solution support offered to integrate with any microcontroller
Applications:
Low cost wireless data transfer
Wireless medical applications
Remote control/security systems
AMR - Automatic Meter Reading
Wireless sensor networks
Keyless entry
Home automation
Process and building control
Automotive systems
Active RFID solutions
Dimensions: 4.1 x 3.2 x 0.5 (L x W x H in cms) Accessories: Antenna up to 3 dBi gain
Other Information:
Similar RF Modules are available in other ISM band frequencies. The part numbers are:
The RDM-T8FZ is a low-cost sub- 1 GHz transceiver designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band 868 MHz, but can easily be programmed for operation at other frequencies in the 779-928 MHz band.
The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kbps. RDM-T8FZ provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of RDM-T8FZ can be controlled via an SPI interface.
A 4-wire SPI serial interface is used for configuration and data buffer access. Features:
Covers over a range of 500 meters line of sight
Standard Frequency: 868 MHz
SPI Interface
Programmable Output power and Frequency
Supports Frequency Hopping
Very High Input Sensitivity of -111 dBm
Support all modulations
Single board Transceiver
Wide operating voltage of 1.8V to 3.6V DC
Low power consumption
Programmable data speed of up to 500 kbps
CSMA-CA protocol to avoid false triggers and collisions among devices operating in the same frequency
Benefits:
No RF skills required by the customer
Ideal choice for ultra low power wireless applications
Can accommodate many RF solutions due to customizable data speed, frequency and output power and advanced digital features and protocols
Easy to integrate with any microcontroller
Complete solution support offered to integrate with any microcontroller
Applications:
Low cost wireless data transfer
Wireless medical applications
Remote control/security systems
AMR - Automatic Meter Reading
Wireless sensor networks
Keyless entry
Home automation
Process and building control
Automotive systems
Active RFID solutions
Dimensions: 4.1 x 3.2 x 0.5 (L x W x H in cms) Accessories: Antenna up to 3 dBi gain
Other Information:
Similar RF Modules are available in other ISM band frequencies. The part numbers are:
RDM-T3FZ - RF Transceiver Module in 315 MHz (+10 dBm)
RDM-A4FZ - RF Transceiver Module in 433 MHz (+13 dBm)
RDM-T4FZ - RF Transceiver Module in 433 MHz (+10 dBm)
RDM-T9FZ - RF Transceiver Module in 915 MHz (+10 dBm)
RDM-T24FZ - RF Transceiver Module in 2.4 GHz (+1 dBm)
The RDM-T9FZ is a low-cost sub- 1 GHz transceiver designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band 915 MHz, but can easily be programmed for operation at other frequencies in the 779-928 MHz band.
The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kbps. RDM-T8FZ provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of RDM-T8FZ can be controlled via an SPI interface.
A 4-wire SPI serial interface is used for configuration and data buffer access. Features:
Covers over a range of 500 meters line of sight
Standard Frequency: 915 MHz
SPI Interface
Programmable Output power and Frequency
Supports Frequency Hopping
Very High Input Sensitivity of -111 dBm
Support all modulations
Single board Transceiver
Wide operating voltage of 1.8V to 3.6V DC
Low power consumption
Programmable data speed of up to 500 kbps
CSMA-CA protocol to avoid false triggers and collisions among devices operating in the same frequency
Benefits:
No RF skills required by the customer
Ideal choice for ultra low power wireless applications
Can accommodate many RF solutions due to customizable data speed, frequency and output power and advanced digital features and protocols
Easy to integrate with any microcontroller
Complete solution support offered to integrate with any microcontroller
Applications:
Low cost wireless data transfer
Wireless medical applications
Remote control/security systems
AMR - Automatic Meter Reading
Wireless sensor networks
Keyless entry
Home automation
Process and building control
Automotive systems
Active RFID solutions
Dimensions: 4.1 x 3.2 x 0.5 (L x W x H in cms) Accessories: Antenna up to 3 dBi gain
Other Information:
Similar RF Modules are available in other ISM band frequencies. The part numbers are:
RDM-T3FZ - RF Transceiver Module in 315 MHz (+10 dBm)
RDM-A4FZ - RF Transceiver Module in 433 MHz (+13 dBm)
RDM-T4FZ - RF Transceiver Module in 433 MHz (+10 dBm)
RDM-T8FZ - RF Transceiver Module in 868 MHz (+10 dBm)
RDM-T24FZ - RF Transceiver Module in 2.4 GHz (+1 dBm)
Krishna Control Systems Dealer and supplier of public address systems, microphones wireless public address systems, amplifiers wireless public address systems, allied system wireless public address systems and communication wireless pa systems.
Yash Enterprise Seller and supplier of communication equipments which includes telephones, cordless telephones, basic telephones, two line cordless telephones, 2.4ghz cordless telephones and electronic telephones.
Processing...
