Riddhi Exports, Ahmedabad

'REVA'  OINTMENT MIXER MACHINE - Jacketed   (G.M.P. MODEL)
(With Anchor Type Mixing Stirrer)

The machine for mixing of ointment. The unit is provided with jacketed mixing vessel fitted with stand on fixed low-speed anchor type stirrer driven by motor and reduction gearbox as per following models.

The inner vessel  will be made out of 16 Gauge S.S. 316 sheet and outer jacket made out of 16 Gauge S.S.304 sheet. 18 Gauge S.S. sheet lid provided with slot for anchor type stirrer moving. Vessel bottom will be slop type with side outlet ball valve. Water inlet drain etc. on jacket. Water heater with thermostate controller contactor in panel box mounting on jacket. Vessel is mounted on four pipe legs with castor wheels for easy moving. Vessel is welded with argon arc.

All contact parts are made out of S.S. 316 quality and body cladded with S.S 304 18 Gauge sheet. Stainless Steel parts polished as matt finish by 120 grit.             

‘REVA’  PLANETATY MIXER MACHINE - Jacketed  (G.M.P.MODEL)

Suitable for mechanical mixing of ointments, dry powder or wet hard  mass etc. The unit is provided with stainless steel bowl of suitable capacity with Stainless Steel slow speed mixing stirrer/beater having twin speed (i.e. the stirrer shaft will be moving on its axis as well as it will be rotating round the bowl) for giving efficient mixing. The bowl is provided with castor wheels for easy handling.

The bowl and jacket will be made out of 14 Gauge thick S.S. sheet and provided with electric heating arrangement with thermostatic control. The unit is easily cleanable.

The machine works on 2 speed 440 volt motor with reduction gear fitted with V' belt pulley drive to give bellow mentioned RPM.

All contact parts are made out of S.S. 316 quality and body cladded with S.S 304 18 Gauge sheet.  Stainless Steel parts polished as matt finish by 120 grit. 

Complete unit as per our standard.

‘REVA’  TRIPLE ROLLER MILL MACHINE(G.M.P.MODEL)    

Suitable for grinding ointment, paste, paints, printer’s Ink etc.in the pharmaceutical, plastc industry. The machine is conducted on a closed sheet iron base, with in-built foot mounting, for floor positioning.

Two work-table selves with stainless steel tops are supplied for placing at both front and rear of the machine. The three horizontal precision ground hard chromed rollers made from stainless steel with surface hardness. The roller size 86mm Dia. x 300 mm long. The side scrapers are fixed with charging-hopper being movable up & down with compression spring  & knob to secure appropriate working pressure of side scraper against the roller. The expendiently designed, discharging scraper. Spout is made out of stainless steel and is provided  with changable sectional. The scraper spout can be removed without the use of tools. Hand wheel for adjusting rear and front rollers are conveniently suitable on the bilatral gear housing. Outpur 35 kgs. approximetely.                                          

The machine  works on 1 H.P., 3 phase 440 volt motor with reducion gear fitted with ‘V’ Belt pulley drive.                           

All contact parts are of S.S. 316 qlty. and  body cladded with S.S. 304,18 Gauge sheet. All Stainless Steel parts polished as matt finish by 120 grit.

Complete unit as per our standard.