 |
|
What We Offer
We manufacture different types of compressed air systems, which are able to meet the varied requirement of different clients. A perfect blend of technology and innovation, our products are useful and cost-effective in the era of cutting-edge technologies. Our competent equipment helps clients to increase the quality and efficiency of work.
|

|  |
Application
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of ≥ 50 μS/cm:
- Acid, alkalis
- Paints
- Pastes
- Water, wastewater, etc.
- Flow measurement up to 9,600 m³/h
- Fluid temperature up to +130 °C
- Process pressures up to 40 bar
- Lengths in accordance with DVGW/ISO
|
|
Reliable flow measurement of gas, steam and liquids
Application
For the universal measurement of the volume flow of gases, steam and liquids.With integrated T-easurement, the mass flow of steam,water (as per IAPWS-IF97 ASME), natural gas (as perAGA NX-19), compressed air and other gases and liquids can be measured.
Maximum range of applications thanks to:
- Fluid temperature range from 200...+400 °C
- Pressure ratings up to PN250/Cl 1500
Approvals for hazardous areas:
Connection to all common process control systems:
- HART, PROFIBUS PA, FOUNDATION Fieldbus
Relevant safety aspects:
- Pressure Equipment Directive
- Up to SIL 2
|  |

|
|

|  |
Volume flow measurement of liquids in chemical or process applications
Applications
The sensors are perfectly suited for bidirectional measurement of pure or slightly contaminated liquids, regardless of the pressure, temperature, conductivity and viscosity.
- Applicable for all homogeneous fluids in acoustically transmissive pipes, even with lining
- For chemical or process applications
- Wide fluid temperature range 40...+170 °C
- Ideal for retrofitting
- Installation without process interruption
Approvals for hazardous area:
Connection to process control system:
- HART, PROFIBUS DP/PA, FOUNDATION Fieldbus
|
|
Smart Transmitter for continuous level measurement in liquids and bulk solids.
Application
The Levelflex M performs continuous level measurement of powdery to granular bulk solids e.g. plastic granulate and liquids.Probes are available with threaded process connections from ¾" and flanges from DN40 / 1½":
- Rope probes, above all for measurement in bulk solids, measuring range up to 35 m/1378"
- Rod probes, above all for liquids
- Coax probes, for liquids
The following interfaces are available for system integration:
- HART (standard), 4...20mA
- PROFIBUS PA
- FOUNDATION Fieldbus
|  |

|
|

|  |
Smart Transmitter for continuous and non-contact precision level measurement. For custody transfer and inventory control applications with NMi- and PTB-approvals.
Application
The Micropilot S is used for highly accurate level measurement in storage tanks and can be applied in custody transfer applications. It meets the relevant requirements according to OIML R85 and API 3.1B.
- The FMR533 with parabolic antenna is excellently suited for free space applications up to 40 m (131 ft).
- The FMR532 with planar antenna is specifically suited for stilling well applications with ranges up to 38 m (124 ft).
- The FMR531 with rod antenna is used for highly accurate measurements of very aggressive products and in narrow nozzles.
- The FMR530 with horn antenna is suitable for free space applications that disallow the use of a parabolic antenna due to tank/nozzle geometry.
|
|
Smart Transmitter for continuous and non-contact precision level measurement. For custody transfer and inventory control applications with NMi- and PTB-approvals.
Application
The Micropilot S is used for highly accurate level measurement in storage tanks and can be applied in custody transfer applications. It meets the relevant requirements according to OIML R85 and API 3.1B.
- The FMR533 with parabolic antenna is excellently suited for free space applications up to 40 m (131 ft).
- The FMR532 with planar antenna is specifically suited for stilling well applications with ranges up to 38 m (124 ft).
- The FMR531 with rod antenna is used for highly accurate easurements of very aggressive products and in narrow nozzles.
The FMR530 with horn antenna is suitable for free space applications that disallow the use of a parabolic antenna due to tank/nozzle geometry.
|  |

|
|

|  |
Smart Transmitter for continuous and non-contact precision level measurement. For custody transfer and inventory control applications with NMi- and PTB-approvals.
Application
The Micropilot S is used for highly accurate level measurement in storage tanks and can be applied in custody transfer applications. It meets the relevant requirements according to OIML R85 and API 3.1B.
- The FMR533 with parabolic antenna is excellently suited for free space applications up to 40 m (131 ft).
- The FMR532 with planar antenna is specifically suited for stilling well applications with ranges up to 38 m (124 ft).
- The FMR531 with rod antenna is used for highly accurate measurements of very aggressive products and in narrow nozzles.
- The FMR530 with horn antenna is suitable for free space applications that disallow the use of a parabolic antenna due to tank/nozzle geometry.
|
|
Smart Transmitter for continuous and non-contact precision level measurement. For custody transfer and inventory control applications with NMi- and PTB-approvals.
Application
The Micropilot S is used for highly accurate level measurement in storage tanks and can be applied in custody transfer applications. It meets the relevant requirements according to OIML R85 and API 3.1B.
- The FMR533 with parabolic antenna is excellently suited for free space applications up to 40 m (131 ft).
- The FMR532 with planar antenna is specifically suited for stilling well applications with ranges up to 38 m (124 ft).
- The FMR531 with rod antenna is used for highly accurate measurements of very aggressive products and in narrow nozzles.
- The FMR530 with horn antenna is suitable for free space applications that disallow the use of a parabolic antenna due to ank/nozzle geometry.
|  |

|
|

|  |
Pressure transmitters with ceramic and metal sensors Overload-resistant and function-monitored With analog, HART or PROFIBUS PA electronics
Application
The Cerabar M pressure transmitters measure gauge pressure and absolute pressure in gases, steams, liquids and dusts. Thanks to the modular instrument concept, Cerabar M suits all areas of process engineering.All process connections are available as hygienic connections, threaded connections, separators and flanges (also as diaphragm seals).
|
|
|
|
|
|
 |