We manufacture high quality Tool Bits which is very useful for various industries. It is primarily used in the planers, shapers and metal lathes and can give efficient performance. The cutting edge ground which is used for particular operation may be reshaped and resharpned as required and held by a tool holder while it is cutting.

It is available in M-2, M-35, M-42 and T-42 material.

We provide highest quality Thread Rolling Dies which are used for the production of threads smaller than one inch. We use ductile material for thread rolling; not the brittle material like cast iron.

It is a ‘cold forming’ process of the material without chips and provide many technical and economic advantages in production department. Enhanced machine use is due to short production time and long lasting tool life. It has following features:

•  Precise profile
•  Enhanced loading capacity
•  No tear and wear of thread
•  Better surface quality of the thread flank

 
 

We manufacture supreme quality Side and Face Cutters which are primarily used in the milling machines. It is designed with the cutting teeth in its side and on its circumference. Depending upon the application it is used, our gamut is manufactured with varied diameters and width. Our Side and Face Cutters are in accordance to IS-6308-1982, BS 122/ Part I-1953 specifications. It has following specifications:
 
Dimensions in mm. (IS 6308-1982)

• Diameter js 16     :   50 to 200
• Bore H7              :   16 to 40
• Width K11           :   5 to 32

Dimensions in inches (BS 122/Part I-1953)
* Diameter 0.045/ -0.000    :  2.1/2 to 6
* Bore 0.00075/ .00025     :  1 to 1.1/4 or 1.1/
* Width 0.005/ - 0.000        :  1/4 to 1.1/4

We produce high quality End Mill Cutters which is basically used in the vertical milling machine. It is very helpful to mill flats & steps and also for generating profiles. It can also perform peripheral and face milling operations. If fed radially into the work place, it can produce slots, grooves and often side pockets. Demands of taper shank type and parallel shank type end mill cutters can be fulfilled easily.
 
Specifications of Taper Shank :

 Specifications conform to IS 6354-1971     
    (Dimensions in mm)
 Cutting Edge Dia js 14     :   6 to 63 

 Specifications conform to BS 122/Part 1-1953
    (Dimensions in Inches) 
 Dia of Cutter 1/8 to 3 

 Specifications conform to IS 6354-1971
    (Dimensions in mm) 
 Diameter js 14                :   3 to 63

 
Specifications of parallel shank:

* Specifications conform to IS 6353-1971
    (Dimensions in mm )

* Cutting Edge js 14    :  3 to 28

* Specifications conform to BS 122/Part 1-1953
    (Dimensions in Inches)

* Cutting Edge Dia       : 1/8 to 3

We manufacture high quality of the Ground Drills which is made up of High Speed Steel (HSS) and is used for sizing the holes. It is available in different shapes and sizes. 
 
Ground Twist Drill specification range :
 

Ground Twist Drill	Specifications	Range
HSS Parallel Shank Twist Drill (JobberSeries)	IS 5101/1969 & BS 328 (Part 1)/ 1959	1.5mm to 16mm &1/16" to 5/8"
HSS Parallel Shank Twist Drill (Long series)	IS 5102/1969 & BS 328 (Part 1)/ 1959	1.5mm to 31.5mm & 1/16" to 1.15/64"
HSS Taper Shank Twist Drills	IS 5103/1969 & BS 328 (Part 1)/ 1959	8mm to 40mm & 5/16" to 1.9/16"

We manufacture high quality Center Drills made of superior quality material which gives the enhanced functional stability. These are used to produce the centre holes in components which need machining between centers. They are superior for the central holes where precise centering is necessary in subsequent operations.

Our Centre Drills conform to IS 6709-1977 and BS 328/Part 2-1950. It has following specifications:
 
IS 6709-1977 (Dimensions in mm)

• Pilot Dia K12     :  2 to 8
• Body Dia H9      :  8 to 25
• Overall length   :  Max. 52 to 103
•                              Min  48 to 97                                
• Pilot length        :  Max. 3.3 to 11.5
•                            Min. 2.5 to 10.1  

BS 328 / Part 2 1950 (Dimensions in Inches)

• B S No.                    :   1 to 7
• Body Dia                  :   1/8 to 3/4
• Pilot Dia                   :   3/64 to 5/16
• Pilot length               :   Max. 5/64 to 15/32
•                                     Min. 1/16 to 13/32
• Overall length           :   1.1/2 to 3.1/2
• Tolerance on Overall Length :   + 1/32 to +3/3

We manufacture & supply high quality machine reamers which are the most popular cutting tool. Machine reamers are manufactured from high quality of steel and is widely acclaimed for its efficient performance under difficult conditions. It requires less maintenance and has high durability.
 
Chasers and Reamers are one of our most popular cutting tools. Developed from high speed steel, the product is applauded for its features of efficient performance under tough conditions, less maintenance, wear resistance and durability. It is a very helpful tool which makes the existing holes more precise and it improves the surface finish.

The quality of our Reamers conforms to IS 5444-1978,        IS 11002-1984 and BS122 / Part 2-1964 standards.

The Reamers are available in Diameter m6 (3.0 to 71.0), Diameter m6 (6 to 50.0), Diameter m6 (3.0 to 20.0)

We manufacture Ground Thread Taps produced from supreme quality of the raw material. It is very helpful for making threads in any machine part for accurate activities.

It is available in M2, M35 as well as in special steel and can be easily customized according to client specifications.

It has following specifications and details:

• Range       :  1mm to 120mm, 1/16" to 5" (higher dia on request)
• Tolerance  :   4H, 6H, 7H, Zone 2, Zone 3, Zone 4, Class 1, Class 2,   Class 3, GH 1 to GH 7

Variety:

• Short machine Taps : Longs Shank m/c caps.
• Short point Taps : BSP parallel & Taper Taps
• NPT & NGT Taps : Serial Taps
• Nib Taps : Flute less Taps
• Pulley Taps : Spiral fluted Taps
• Threadforms : BSW/BSF/UNF/UNC/MM//BSP/BSPT/BA/BSCY/WW/NPSL/ SQUARE/ACME/NGT/NPT/BSCON/ME
• Surface Treatment : Blued/Nitrides/TIN Coated
• Taps also available in RH and LH threads

We provide best quality of the Metal Slitting Saws which is used for milling narrow stock. It has fine and coarse teeth which are manufactured for ferrous or non-ferrous metal industry. Coarse pitch and fine pitch cutters are provided in plain tooth and staggered tooth form to give chip clean chit.
 
These are available as per  B.S. 122-1953 Part 1 Specifications, starting from Thickness 3/32 to 1 and Diameter 2 1/2 to 6 and can be customized according to client specification.
 
 
 

We manufacture diverse range of mechanical spanners which are available in different sizes in order to meet the demand of the client. These Spanners are strong and have an enhanced life. These spanners can be presented in shrink packing, pouch packing, bulk packing, window display box, satin finish and tray packing.
 
The wide range of products is as follows:

- Double open end spanner:
These spanners are made up of high quality chrome vanadium steel and are chrome plated. It is fully polished and is elliptical in type.

- Combination spanner:
It is fully polished in the carbon steel and is chrome plated. It can be customized according the client specifications and details.

- Ring spanner:
It is made up of chrome –vanadium steel and is elliptical in type. It is chrome plated and is used for various purposes.

We provide extensive range of screw drivers and pliers which are available in different shapes and sizes as per the B.I.S. specifications. High quality chrome vanadium steel is used in the manufacturing of these screw drivers and pliers. The handles of these screw drivers are made of virgin quality acetate.
 
Screw drivers are available in different patterns like electrician pattern (with insulation); reversible (two-in-one) engineers pattern, Philips head. It is also available in neon bulb tester and kit form. It can be packaged according to client's specifications and details. 
 

These Allen keys are very helpful tools and widely used in the various mechanical applications. These are the accuracy engineered tools which provides total solutions for the users. It is manufactured from chrome vanadium steel for robustness and long life. It is available in different patterns such as long pattern black, ballpoint black, short pattern black and star type short pattern and is also available in kits. It can also be easily customized according to the client specifications.