Features :

• Suitable for Modular mounting
• Steel bowl guard, bayonet type.
• Internal Autodrain 

1. Float type, no electrical connections required
2. Provided with manual drain                     
3. Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean.

• Bronze filtering element.
• Separator and shield for efficient moisture separation.

Series : F1A
Sizes : G3/8, 1/2

Features :

• Conforms to ISO 8573 - 1 standards.
• Borosilicate filtering element.
• 99.99% compressed filtered air upto 0.01micron to 0.1 micron.
• Suitable for Modular mounting
• Steel bowl guard, bayonet type on FS15 modles and threaded type on FS13 model.
• Press type Manual drain for easy operation.
• Separator for efficient moisture separation.

Application :

These type of mist seperators are used in Chemical, Pharmaceutical, Food processing industry, Paintshops and for other precision pneumatic systems.

Function :

• Removes submicronic oil, water droplets and solid contaminants from compressed air.
• Used for high efficient filteration of compressed air, removing fine oil particles and droplets of sizes upto 0.01 microns

Series : FS1
Sizes : G1/4, 1/2

Features :

• Conforms to ISO 6953 - 1
• Suitable for panel and modular mountings
• Non raising ' Press to Lock ' adjusting knob for locking at any set pressure
• Diaphragm operated, relieving type
• Pressure compensated by Balanced poppet.
• Flow compensated in models R14 and R15 ( with venturi ) for faster response
• Good flow and regulating characteristics.
• Built in non return valve allows free air flow in reverse direction.
• when the inlet air is reduced by and below the setup pressure.

Application :

Apart from its basic regulating characteristics in forward direction, this regulator with a built in non return valve allows free air flow in reverse direction, thus enabling to be used in applications requiring cylinders to exert two different force during extending and retracting strokes.

Series : R1N
Sizes : G1/4, 3/8, 1/2

Features :

• Conforms to ISO 6301 - 1
• Suitable for Modular mounting
• Fog / Mist type
• Fine adjustment of lubrication
• Steel bowl guard, bayonet type on L14 & L15 models and threaded type on L13 mode
• Lubrication proportional to flow

Series : L1
Sizes : G1/4, 3/8, 1/2

Features :

• For higher pressure range above 10 bar
• Suitable for Modular mounting
• Fog / Mist type
• Fine adjustment of lubrication
• Aluminium bowl guard, bayonet type
• Lubrication proportional to flow

Series : L1M
Sizes : G1/4, 3/8, 1/2

FILTER REGULATOR COMBINATION with Internal Autodrain - 3/8, 1/2 SIZES

Features :

• Modular type
• Suitable for panel mounting
• Filter

1. - Bronze filtering element.
2. - Separator and shield for efficient moisture separation.
3. - Bayonet type steel bowl guard

• Internal Autodrain

1. Float type, no electrical connections required.
2. Provided with manual drain.
3. Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean.

• Regulator

1. Diaphragm operated, relieving type.
2. Pressure compensated by Balanced poppet.
3. Flow compensated for faster response.
4. Non raising ' Press to lock ' adjusting knob for locking at any set pressure.

• Good flow and regulating characteristics.

Series : FRC1A
Sizes : G3/8, 1/2

Features :

• Modular type
• Suitable for panel mounting
• Filter

1. Bronze filtering element.
2. Separator and shield for efficient moisture separation.
3. Bayonet type Aluminium bowl guard
4. Press type manual drain for easy operation
5. Suitable for automatic drain

• Regulator

1. Diaphragm operated, relieving type.
2. Pressure compensated by balanced poppet.
3. Flow compensated
4. Non raising ' Press to lock ' adjusting knob

• Good flow and regulating characteristics.

Application :

These type of filters are used for Chemical, Paintshops, Pharmaceutical, Foundry etc.

Series : FRC1M
Sizes : G1/4, 3/8, 1/2

Individual Filter, Regulator & Lubricator units easily removable / mountable without disturbing the pipe line

Features :

• Modular type for easy and fast maintenance.
• Suitable for wall mounting.
• Filter

1. - Bronze filtering element.
2. - Separator and shield for efficient moisture separation.
3. - Press type manual drain for easy operation

• Regulator

1. Diaphragm operated, relieving type.
2. Pressure compensated by Balanced poppet.
3. Flow compensated in models FRLM14 and FRLM15 for faster response.
4. Non raising ' Press to lock ' adjusting knob for locking at any set pressure.

• Lubricator

1. - Fog / Mist type Lubricator.
2. - Fine adjustment of lubrication.
3. - Lubrication proportional to flow.

• Steel bowl guard, bayonet type on FRLM14 & FRLM15 models and threaded type on FRLM13 model.
• Good flow and regulating characteristics.

Series : FRLM1
Sizes : G1/4, 3/8, 1/2

FRL Modular without Piping Adaptor

Individual Filter, Regulator & Lubricator units easily removable / mountable without disturbing the pipe line

Features :

• Modular type for easy and fast maintenance.
• Suitable for wall mounting.
• Filter

1. - Bronze filtering element.
2. - Separator and shield for efficient moisture separation.
3. - Press type manual drain for easy operation

• Regulator

1. - Diaphragm operated, relieving type.
2. - Pressure compensated by Balanced poppet.
3. - Flow compensated in models FRLM14 and FRLM15 for faster response.
4. - Non raising ' Press to lock ' adjusting knob for locking at any set pressure.

• Lubricator

1. - Fog / Mist type Lubricator.
2. - Fine adjustment of lubrication.
3. - Lubrication proportional to flow.

• Steel bowl guard, bayonet type on FRLM14 & FRLM15 models and threaded type on FRLM13 model.
• Good flow and regulating characteristics.

Series : FRLM1
Sizes : G1/4, 3/8, 1/2

FILTER REGULATOR COMBINATION - LUBRICATOR , MODULAR 1/4 3/8 1/2

Individual Filter- Regulator combination & Lubricator units easily removable / mountable without disturbing the pipe line

Features :

• Modular type for easy and fast maintenance.
• Suitable for wall mounting.
• Filter         

1. Bronze filtering element.
2. Separator and shield for efficient moisture separation.
3. Press type manual drain for easy operation

• Regulator

1. Diaphragm operated, relieving type.
2. Pressure compensated by Balanced poppet.
3. Flow compensated in models FRCLM14 and FRCLM15 for faster response.
4. Non raising ' Press to lock ' adjusting knob for locking at any set pressure.

• Lubricator

1. Fog / Mist type Lubricator.
2. Fine adjustment of lubrication.
3. Lubrication proportional to flow.

• Steel bowl guard, bayonet type on FRCLM14 & FRCLM15 models and threaded type on FRCLM13 model.
• Good flow and regulating characteristics.

Series : FRCLM1
Sizes : G1/4, 3/8, 1/2