The primary reason for using thermal management products in enclosures is to maintain the continuity of the process that it controls, as breakdowns are time consuming and costly. Selecting the right thermal management products to maintain the right temperature and protect sensitive components inside, against extreme heat/cold or dust, is as important as your decision to use thermal management in the first place. Using the Eldon thermal management calculation program, you can calculate exactly what system you need to install to keep your components safe, and thereby avoiding un-necessary downtime of vital equipment or processes.

The software is free to use and can be easily downloaded from this website. The program contains databases of Eldon enclosures, their dimensions, and our conditioning devices (filter/fans, cooling units, heat-exchangers etc). There is also a selection of the most commonly used electrical components with their heat dissipation. After having chosen the enclosure type and size, given all the environment conditions (enclosure situation, required equipment temperature, ambient temperature and heat dissipation), the program will recommend the most appropriate conditioning solution. A calculation report can then be printed.

Cooling Unit

DTS, DTI, DTD, PWS - Cooling Unit
Description: High performance cooling unit for vertical installation. The unit is mounted flush with the outside surface so maximizing space inside the enclosure. Integrated fault and door contact. The thermostat is adjustable between 25ºC and 45ºC, factory setting 35ºC. Cooling capacity shown in the table is at L35/L35, the cooling capacity for specific conditions must be find out in the diagrams. Ozone friendly refrigerant R134a.

Air Water Heat Exchanger

PWD - Air Water Heat Exchanger

Description: For horizontal installation. It is not necessary rework the cutout to guarantee the IP. Integrated thermostat and solenoid valve for temperature control. The thermostat is adjustable between 8ºC and 50ºC, factory setting 35ºC. 10 bar permissible operating pressure. Cooling capacity at 400 l/h and W10/A35, the cooling capacity for specific conditions must be find out in the diagrams.

Electronic Thermostats

ETR, EFR, ETR200, ETR203, ETF, ETF300 - Thermostats

Description: Thermostat with changeover contacts to manage temperature in panels. Sensor element thermostatic bimetal.

Mounting clip for 35 mm DIN rail (EN 60715). Device with two independent thermostats. One thermostat with a normally closed contact for regulating heaters, and one with a normally opened contact for regulating cooling devices or signal devices. Sensor element thermostatic bimetal. Mounting clip for 35 mm DIN rail (EN 60715).

Vortex Cooler

BP, BPT - Vortex cooler
Description: Small enclosure cooler. Works on compressed air.
Keeps electronics inside an enclosure cool and clean. Due to small size suitable for smaller enclosures.

Suggested Companies

Related Categories

Rohit Agencies Private Limited

Cooling Unit

Air Water Heat Exchanger

Electronic Thermostats

Vortex Cooler

Related Product Catalogs

Nimesh Electronics, Kalyan

V- Care Electronics

Orbital System (Bom.)Pvt. Ltd.

Suggested Companies

Related Categories