Roll & Grip

Pune, Maharashtra

IndiaMART Member Since: 2006
Products [15]
Phone: +(91)-(20)-24538441

HOME

ABOUT US

PRODUCTS & SERVICES

SEND ENQUIRY

Products & Services

Sitemap

New Items

Die Lubrication Spray Gun

Roll & grip™ make dual action hand spray gun™ dj-10 is ideal for spraying of die coats on forging, die casting and rubber moulding dies where simultaneous spraying of both the dies is desired. The straight pipe helps in easily cleaning and spraying both the top and bottom die simultaneously. With reduced air blast provided by this gun. Both the top and bottom dies can be easily sprayed where the die opening is small. The spray gun has two hose connectors for supply of air and die-coat. It has a liquid control valve for controlling quantity of die coat being sprayed. The long aluminium pipe provides easy access to all parts of die from safe working distance. This gun comes with straight aluminium pipe with nozzle at the end. The spray nozzle has two orifices on opposite faces and provide diagonally opposite spray. Since this gun provides spray on diagonally opposite sides it is very effective in spraying both the dies simultaneously without twisting the spray gun and ensures proper reach and application of die-coat with most economical hand movements

Die Lubrication Spray Gun

Die Lubrication Spray Gun (Dlsg 02)

Die Lubrication Spray Gun

Die Lubrication Spray Gun(dlsg 04)

Die Lubrication Spray Gun

Die lubrication spray gun (dlsg 03)

Die Lubrication Spray Gun

Roll & Grip™ make Dual Action Hand Spray Gun™ HB-86 is ideal for spraying of die coats on forging, die casting and rubber moulding dies. The spray gun has two hose connectors for air and die-coat. It has a liquid control valve for controlling quantity of die coat being sprayed. The long aluminium bend pipe of the spray gun provides easy access to all parts of die from safe working distance. The angle of bend of the aluminium pipe ensures proper reach and application of die-coat to innermost and difficult to reach die parts.

Die Lubrication Spray Gun (Dlsg 05)

Die Lubrication Spray Gun(dlsg 05)

Dual Action Hand Spray Gun

The spray gun works in two steps. Partially pressing the handle releases moderate air blast which is for blowing scales and cleaning the die. Pressing the handle completely gives out spray of die coat.

The air is needed at pressure between 2 to 5 Kg/cm². The die coat can be supplied using gravity feed arrangement or pressure feeding arrangement. For gravity feed, keep the die coat container at least 10-12 feet above the spray gun level. If using pressure feeding arrangement the liquid pressure can be set above 0.2 Kg/cm². To get the effective spray and to avoid backing out of die coat, depending on the die-coat supply pressure, the supply air pressure may need to be reduced. This can be done by using air pressure regulator. This pressure adjustment is especially necessary for gravity die coat feeding since the die coat is fed at very low pressure. In addition, the liquid pressure may be adjusted along with air pressure to get proper spray.

HB - 35 Die Lubrication Spray Gun

The air is needed at pressure of 4 kg/cm2 or more for getting powerful air blast. For applications where air blast is not needed and where the surface to be coated is small the air can be supplied at reduced pressure. Similarly where gentle spraying is desired air at lower pressure is needed. put a pressure regulator in the air supply line and reduce air pressure to the desired level. Too low air pressure would give ineffective atomisation. The die coat can be supplied using gravity feed arrangement or pressure feeding arrangement . For gravity feed keep the die coat container at least 8 feet above the spray gun level. If using pressure feed container the liquid pressure can be set above 0. 1kg/cm2. For viscous liquids higher liquid pressure may need to be set. the dual action hand spray gun? Hb-35 comes with different lengths of aluminium bend pipe to suit the requirement. E. G. Hb-35-300 (300mm long al. Pipe), hb‑35‑225 (225mm long al. Pipe) etc. The length of the aluminium pipe should be selected considering the size of machine, size of die and the distance between operator and the die.

HB - 86 Die Lubrication Spray Gun

Roll & grip Make dual action hand spray gun? Hb-86 is ideal for spraying of die coats on forging, die casting and rubber moulding dies. The spray gun has two hose connectors for air and die-coat. It has a liquid control valve for controlling quantity of die coat being sprayed. The long aluminium bend pipe of the spray gun provides easy access to all parts of die from safe working distance. The angle of bend of the aluminium pipe ensures proper reach and application of die-coat to innermost and difficult to reach die parts.

Standard Hose Connectors

Standard Hose Connectors 9mm OD

Xt Hose Connectors

XT Hose connectors with "G ¼” threading

Other products & services we offer

Die Coat

Die Lubrication

Pu Foam Mould Coating

Tire Mould Coatings