Automotive Spares & Components

We manufacture high performance disc brake pads that are extremely essential for your vehicle. Made from superior quality cast iron these disc brake pads are the best device to slow down or stop the rotation of the wheels of your vehicles. Our brakes are able to control the speed of the vehicle instantly without creating any kind of imbalance of vehicle thus avoiding accidents.

Our disc brakes pads are resistant to "brake fade" that is generally caused by the overheating of brake components. They are generally used in light commercial vehicles, cars, bikes etc.

We offer following range of oil seals:


Heavy Commercial Vehicle Oil Seals

Combining a recognized lead in technology and innovation, we offer highest quality heavy vehicle oil seals. Conforming to highest standard of quality, our heavy vehicle oil seals have acceptance worldwide.

Light Commercial Vehicle Oil Seals

Precisely built and reasonably priced our high quality Light Vehicle Oil Seals ensure flawless performance and are highly in demand. They are designed to give you the complete value for your money.

Passenger Vehicle Oil Seals

Our Medium Vehicle Oil Seals are precisely manufactured parts and are highly in demand in the international market for its quality, durability and performance.

Earth Moving & Construction Equipment Seals

Our quality Earth Moving & Construction Equipment Seals are tested and verified for durability, Accuracy and precision so that our clients get value for their money.

Tractor Seals

We have developed our expertise in the design and development of high quality and precision Tractor Seals. All our Tractor Seals undergo rigorous quality control checks and are manufactured to the highest material specialty standards.

We offer a wide assortment of Bearings, which finds wide application in the automobile sectors. These are widely used in two & three wheelers, cars, tractors, SUVs, MUVs, etc. Our range of bearings are dimensionally accurate and also finds application in the agricultural, textile and other engineering as well as machinery application. These are quality checked on varied parameters and ensures excellent running and accuracy. Our wide range includes-

Deep Groove Ball Bearings

Self Aligning Ball Bearing

Needle Cage Bearings

Angular Contact Ball Bearings

Clutch Bearings

Roller Thrust Bearings

Cylindrical Roller Bearings

Tapper Roller Bearings

Needle Roller Bearings

Steering Bearings

Water Pump Bearings

Spherical Roller Bearings

Pillow Block Bearings

ADV Bearings

Spare Cone & Cups Bearings

Bearing components are tested for:

• Roundness.
  
• Square ness.
  
• Concentricity and coaxiality.
  
• Accuracy with long life of our bearings.
  
• Excellent running
  

U.J. Cross & Bearings cups are made from case carburising alloy steel with all precision dimensions. Finest quality needles are used for extra long life.

We offer advanced range of UJ cross products fabricated by our engineers using quality raw material. These excellently manufactured UJ crosses are made from stainless steel and ensures accurate dimensions. Apart from this, we are also providing customized solution to our clients as per the specification. Also, we are providing these products at industry leading prices with longer functionality. The special features of our product are as follows:

• Finest quality needles are used for extra long life
• Accurate Dimensions
• Competitive prices

We manufacture both Asbestos Brake Linings and Asbestos-Free Brake Linings for vehicles of various types. We offer quality and performance based Brake Linings with cost per mile in mind. They are of classic quality and are made using a unique blend of ingredients such as mineral fibers, friction dust, resins etc., to meet the latest expectations of motorists and exceed the functional performance. It has an excellent overall rating with a stable coefficient of friction and low wear, over a wide range of temperatures and speeds.

Rivets

Steel rivets of all sizes, fully & semi-tubular are available on demand in zinc, brass & copper coating. Aluminum, Brass and Copper rivets are also available.

Applications of Brake Linings

Recommended for Buses, Cars, Tractors and other light vehicles and heavy vehicles.

We offer various types of filters, some of these are :

Oil Filters

The function of oil filters is to prevent contaminants which may be contained in the lubricating oil from reaching sensitive engine parts without restricting normal oil flow. The internal source of contamination include wear products from the rubbing surfaces on engine, blow-by gases leaking from the rings of pistons and de-gradation of oil itself.

The presence of foreign matter in the piston ring areas can seriously decrease their efficiency resulting in loss of engine performance. The most important job of oil is to lubricate the engine's moving parts. Dirty oil wears out these parts much faster.
Oil filters should be replaced along with the oil as the new oil can pick up the contaminants trapped in old oil filter and re-circulate them to engine's moving parts. Frequent oil and filter changes are an effective and economic way to increase engine life.

Oil Filters are available as:

• Spin-on
• Cartridge
• Strainer

Fuel Filters (Petrol)

Contaminants in engine fuel can clog the drilled or cored passages in carburetor, upsetting their metering performance, causing loss of power, poor engine starting, damaged exhaust valves etc. Dirt, rust, scales and water are the major impurities present in fuel. The main cause of fuel contamination is corrosion or deterioration of inner surface of the tank itself. The fuel filters are essential in helping to protect fuel system from contaminants. All the fuel that enters the carburetor must pass through fuel filters. Fuel filters with their high quality and efficiency ensure long and trouble-free engine life. It is far easier and cost effective to replace periodically a fuel filter than to clean and repair the whole fuel system.

Fuel Filters (Diesel)

In case of diesel engines, the need for effective diesel fuel filtration is essential to protect the highly sophisticated fuel pump and injection equipment. Fine and ccoarse filters are needed to keep fuel flowing under the toughest conditions. The most damaging contaminants to fuel injection system are abrasive particles. The critical areas for wear in the pump are delivery valve and pumping elements.Water as well as dirt can be present in diesel fuel and this can have very disastrous effect on fuel injection pump. Diesel fuel filters are designed to remove all the contaminants from fuel. All the fuel must pass through the filter before it goes to fuel injection system.

Diesel Fuel Filters are  available as

• Coarse and Fine Diesel Fuel Filters
• Coil Type Fuel Filters
• Spin On Diesel Filters

Air Filters

The quantity of Air used by internal combustion engine is very vast. The possibility of inducting a considerable mass of solid contaminants from the atmospheric air is very high. The air filter removes carbon, abrasive and other contaminants from air before it mixes with fuel in the engine system. If allowed to get inside the engine, such particles can damage cylinder walls, pistons and piston rings. ROULUNDS air filters lengthen engine life, prevent engine wear and give better fuel economy.

We offer asbestos based and asbestos free roll linings in rubberized and woven compositions with asbestos free roll linings are made in semi metallic and organic compositions.

• All roll linings are available with wire backing also.
• Designed for multipurpose usage and display a smooth stopping power and a consistent performance.

We are the manufacturers & our supplied world class models include: Tata, Massey Ferguson, Mahindra, Leyland, Maruti (Suzuki), Sonalika, Ford, Escort, Eicher, Swaraj, Jeep Willys (UK), DCM Toyota, RTV, Dodge, Dual Clutch, Bedford, Mercedes Benz, Volvo, Scania and Spicer etc.

• We are using high quality 1st grade raw material as applicable in various type of assemblies.
  
• Manufacture diaphragm & coil spring type cover assemblies at our in-house manufacturing unit.
  
• All cover assemblies are dynamically balanced on computerized balancing machine.
  
• Heavy duty clutch cover assemblies provide increased torque capacity and durability.
  
• High performance friction material used for wet & dry running applications.
  
• Its uniqueness comes with a radical increase in pressure without altering the proper geometry of stocking diaphragm.
  

Applications of Clutch Cover Assemblies

• Light Vehicles / Cars
• Commercial Vehicles / Trucks / Buses
  
• Tractors & Brake Disc
  

To sustain extensive pressure and for maximum accuracy, tie rod ends are manufactured on state of the art CNC turning machines, microprocessor controlled grinders and SPM thread rolling machines. Each Tie Rod is subjected to HF induction for longer life and smooth operation.

Tie rod ends are designed with one-piece forged housing of high quality Alloy Steel and are manufactured on modern CNC turning machines; microprocessor controlled grinder and SPM thread rolling machines. The cold forged Ball Pins are subjected to HF induction for long life. These tie rod ends have maximum accuracy and are capable to sustain extensive load for longer life.

We are manufacturers of automotive ball joint. All ball joints are produced on latest CNC turning machines by using finest quality alloy steel for smooth movement. They are designed with low friction polymer sockets or metal to metal sockets depending upon the application load.

Roulunds Ball Joints have some distinguished features. They are designed with a one-piece forged housing with a cold forged, heat-treated stud for superior strength and durability. The Metal stud with full-ball configuration provides full, smooth and even rotational movement for more responsive steering. Exclusive double bearing socket allows for fewer preludes, reduces steering effort and trouble free smooth drive.

We fabricate propeller shafts which are used in automobiles and in various other industries across the globe. These propeller shafts also have immense strength and increase the performance of the engine. Customization of these products has to be provided as per the specification.

The unique features of our product are as follows:

• High durability
• Longer functionality
• Corrosion resistant
• Competitive prices

We offer Clutch Disc with breakthrough designs, full-fledged R&D, Computer technology, in-house testing facilities, innovative product line. Our Clutch Disc are complemented by a strong emphasis on quality control and professional commitment to the highest technology and international standards. An excellent quality of hub and the use of thoroughly tested, field proven, friction material make our products singularly outstanding in performance and customer acceptance in the national and international markets. The Clutch Disc are supplied with Asbestos or Asbestos Free Clutch Facings to suit the customer requirements. A wide range of Clutch Disc are available for different makes of Commercial Vehicles, Cars and Tractors. There is also a provision to cater to the customized requirements for individual needs.

• We design & supply in the Range: 160 mm to 452mm Dia for Cars, LCV, HCV Commercial Vehicles, Tractors and Heavy Earth moving Equipments like Road Rollers.
  
• We manufacture Clutch Disc with highest quality Raw Materials of reputed companies.
  
• We design to ensure optimum transmission of power with maximum driving comfort.
  
• We supply single and multi stage type, self alignment type bonded & rigid type and brake discs also.
  
• We supply with asbestos based, asbestos free facing and sintered pads type.
  
• We have an also provision to design/ make as customer requirement for individual needs.
  

Applications of Clutch Disc:

• Light Vehicles / Cars
• Commercial Vehicles / Trucks / Buses
• Tractors & Brake Disc

Molded sinter buttons and pads for high load applications. We offer high performance Sintered Friction Materials for dry running clutch applications, where high specific loads are applied. Our materials run against steel, cast iron and composite materials. Our sintered pads and sintered brake pads exhibit a stable coefficient of friction, have low wear, are quiet and withstand high operating temperatures.