24 PICANOL GTM-A -4-R-190
y.o.c. 1991/92, 1900 mm, 4 colors,
ELECTRONIC STAUBLI dobby 2660 EQUIPED 16-18 shafts,
Accessories per machine :
4 prewinders,
10 Heald frames,
1.5 warpbeams,
1.5 Cloth roll
4500 heddles/droppers.
Location:Abroad

PICANOL GAMMA 8R-220 ,Machines with Sumo Yoc 2002 , 220cm reed width , Staubli 2861 dobby, 24 Levers, ETU / MTU
Accessories per machine:
10 frames
6 prewinders
1,5 warp beam, 1,5 cloth roller
3000 heddles and drop wires
Location Europe

Make: SOMET
Model: Thema 11
Series 102 E Year of Construction 1992.
Working width 2100 mm
6 colours
Headle frames: 18 installed
Levers capacity: 20
Weft feeders: Sirio Robot 4 pcs/loom
Dobby: electronic dobby Staubli 2660
Quantity: 12
Price: 12.500 EUR/ machine CNF Nhava Sheva –India

NUOVO PIGNONE LOOM
DETAIL width 336 cm
SUMMARY
20 SHAFTS 2 LOOMS
18 SHAFTS 7 LOOMS
16 SHAFTS- 9 LOOMS
19 SHAFTS 3 LOOMS
17 SHAFTS 1 LOOM
15 SHAFTS 1 LOOM
--------
TOTAL 23 LOOMS

23 Nuovo Pignone Terry TPS 636 looms
Width 334 cm, Year 1992
Complete with all accessories.
Location:India

1)5 Nos Sulzer Tw 11 85" VSD KR 1
Serial above 35000
Accessories per loom:-
1.5 cloth roll
1.5 warp beam
4 Weft feeder
12 heald frames
5000 heddles and droppers
Location:India

2) 12 Nos Sulzer Pu 143 MW 110 E 10 D1 R,
year 1986/87, Weft Mix 8 cams
Each machine complete with:
8 heald frames,
2 split beam 940mm flange diameter,
1 batching motion or ,
2 weft accumulators heads with creel for cones and control box
Heddles and droppers
Location:Europ
3) 16 Nos Sulzer Tw 11 85" VSD KT D1
KT dobby 18 levers, 4 colours

Accessories per loom:-
4 weft fedder
1.5 cloth roll
1.5 Warp beam
10 Heald frames
Heddles and droppers
Location:India

4) 11 Nos Sulzer P7100 143"
Year 1988-91 Staubli mechanical dobby,4 colours, 18 levers

5)9 Nos Sulzer P7100 153"Yr 1993-96, Weft Mix , 8 levers
Accessories per loom:-
2 Weft feeder
1.5 Warp beam
1.5 cloth roll
6-8 Heald frames
heddles and droppers
Location:India

6) 14 Nos Sulzer Pu 85" VSD KR looms
6 Nos Sulzer Pu 85" VSD KR D1
Kr 1 dobby 18 shafts, 4 colours
8 Nos Sulzer Pu 85" VSD KR2
KR 2 dobby 18 shafts, 4 colours
Accessories per loom:-
4 weft feeder
1.5 cloth roll
1.5 warp beam
10 heald frames
heddles and droppers
Location:India

LAFER ITALY MADE ULTRASOFT TYPE BRUSH SUEDING MACHINE(PEACH MACHINES)
W.W 2200 MM, YEAR 2003 6 BRUSH MACHINE
LOCATION:EUROPE

PADDING MANGLE
PADDING MANGLE : MAKE-RONSON INDUSTRIAL ENGINEERING,YEAR-1994,MANGLE ROLL –3 NOS RUBBER ROLL(ONE NO ROLL IN SPARE)BATCHING SYSTEM – PNEUMATICALLY CHAIN DRIVE,TANK-SS WITH 8 NOS GUIDE ROLLS,CHEMICAL TANK-2 NOS,SS TANK,MANGLE DRIVE-REDUCTION GEARBOX,MANGLE MOTOR- 7.5 HP D.C.MANGLE ROLL PRESSURE –PNEUMATICALLY CYLINDER PRESSURE,LOADING & UNLOADING BY 2 HP MOTOR BELT & CHAIN DRIVE,ELECTRICAL PANEL-COMPLETE IN RUNNING CONDITION

1 Continuos decatising machine make SPEROTTO model MULTIDECAT 2,
year 1988, width 180 cms, complete with weft straightner CORINO,
centering device, Brushing device with dust collection.

Status: Running
Delivery: ready

JT-10
1 No.J.T.-10,MAKE : HARISH TEXTILE ENGINEERING,YEAR-1994,MAIN BATCHING ROLL-2 NOS,PRESSURE ROLL-2 NOS,PRESSURE ROLL DRIVE : PNEUMATICALLY OPERATED CHAIN DRIVE,LOADING & UNLOADING SYSTEM ATTACHED IN M/C,BATCH DIA-1600 MM,FABRIC LOADING CAPACITY-1200 KG,TEMP. CONTROLLER-AUTOMATIC CONTROL,WORKING WIDTH-1600 MM,MAIN DRIVE MOTOR-7.5 HP,UNLOADING MOTOR-3 HP,ELECTRIC PANEL-COMPLETE,TANK-SS WITH GUIDE ROLL OF 1000 LTRS CAPACITY
4 Nos. JT 10 Machine (3 Nos. Shakti & 1 No. Local make), 70” SS Rolls, double
Squeezing drive with 2 Motor & reduction gear,complete with all parts in condition.

JIGGER
10 Nos. Jumbo Jiggers, in which 8 m/c 66”, 1 -60” & 1-84” width Ebonite/SS Rolls
Complete with all parts, Shakti / Local make
1. 2 Nos. Shakti make Jumbo Jiggers, 66” Roller width, SS Rolls machine is complete with electricals.

STENTER
1. 1 No. Harish Supra 5 Stenter machine,
1996 year of make, 1800 mm width,5 Chamber, oil heating, Pin & clip type,3 bowl
pneumatic mangle having two rolls
only, 79” roller width complete with
electrical & panel board in good condition.
2.1 No. Artos make Stenter machine, 4 Chamber, 1200 mm width, Pin type, oil heating with 3 bowl mangle complete with electrical & panel board in very good condition.

ROTARY MACHINE
1.One Number Stork RD IV 84” Blanket width, 72” Printing, 12 colours complete with 2 chamber dryer with 3 pass conveyor blanket, machine is complete with all parts in very good condition.
2.1 No. Stormac RD IV Rotary Printing machine, 84” Blanket width, 14 colours working (Provision for another 2 colour but not installed) 2 Chamber dryer, side exhaust fan, Steam heating complete with all parts, electrical panel, dimmer etc in very good condition
LOOP MACHINE
1. One Number Stormac make H.S II 200/2800 Loop machine, 120” width, 200 meters capacity, machine No.LS 002, complete with all parts in very good condition.
2.1 No.Texcel make Loop m/c, 66” width, 260 Meter complete with all parts.
MERCERISING
1.1 No. Mercerising machine Swastick make 2002 Model having 14 Rolls, Top Rubber Rolls & Bottom DD Tolld (Floating) with SS Chambers, washing compartment with 6+6 SS Guide Rolls (close chambers) three Nips complete with Batching & Platter arrangement, Electric motors & Panel board
2.1 No. Dhall make Mercerising machine 79” width complete with all parts in very good working condition
3.One Number Mather & Platts make Mercerising machine, 2.5 Mt with (102 “ Roller width), having 18 Rolls (10 Rubber & 8 SS Rolls) SS Stabliser close chamber, one close washing and one open washing tank, total 4 Nips, individual driven complete with electrical motor, panel board.

1.1 No. BNP make Drying Range machine, 16 Cylinder, 84” width with motor main gear and dimmer, 2 Bowl mangle 85” width Dimmer, motor, Gear electric panel board, Steam line, Rotary joint, Entry platter complete with all parts in running condition.
2. 1 No. Vertical Drying Range machine, Shakti make, 17 Cylinder, 84” width, 30” dia with 2 Bowl Mangle, Chain drive complete with Reduction gear, motor all parts in very good working condition.
SOAPER MACHINE
1 No. Second-hand Textima 1990 Model Soaper Print Washer machine, 76” width, 6 close compartment with 7 Nips all chambers are SS, each chambers having SS Rolls of 14” dia with SS Guide Rolls and screw roll, all nips are individual driven complete with panel, electricals in very good working condition
1.1 No. Soaper machine, S.M Engineering make, 7 open washing tanks & 6 Nips, all nips are individual driven, 71” Roller width

1. 1 No.3 Bowl Calender machine, Mather & Platts make, 1996 year of make, open type, 2 Cotton Bowl & 1 Chill Bowl, cotton 78” width dia 24”, Chill dia 15”, hydraulic pump motor, gear motor, electric panel board, Entry platter complete with all parts in very good working condition.

2. 1 No. 5 Bowl Calender machine, Prabhat 2005 year of make, 72” width
3 Cotton bowl dia 24”, 1 Chill bowl 15” & 1 Cast iron bowl dia 22”, Shaft 6.1/2” complete with redeuction gear, with 40 HP Slipring motor , panel board in very good working condition but without friction gear.

1.1 No. Jupiter Sizing Machine, 2001 year
of make, 7point A/c. Drive, WarpingBeam Creel Capacity 20 with magazine creel
Warping Beam width Flange to Flange 1800
mm Flange dia 800 mm , No. of Drying
Cylinders, 4 + 4 + 6 = 14 beams, Drying
Cylinder width 80” / 2032 mm, Sow Boxes
(a) Double immersion / Double squeeze(b) Double immersion / Double squeeze, Creel
tension control BNR – PLC system by using
load cell & proportionate valve, Weaver’s
Beam Flange Dia, 1000 mm - 39 ½1000 mm
39 ½ complete with all parts in very good
working condition.

2. 1 No. Juipter make Sizing machine, 2000 year of make, 130” head stock, 2 Sow box , 12 cylinder in which 11 cylinder working, Tefloan coated, width of the cylinder 83”, 20 creel beam with 2 Cooker, 1 Mixing tank with stirrer, motor panel complete with all parts in very good working condition

COMPLETE RING SPINNING PLANT 30144 SPINDLES COMPLETE RING SPINNING MILL RIETER A10 bale opener 1997 Cotton blowroom,
Marzoli and Rieter with Rieter B60(2000) and B11(2000) and Topteks Sorter (2002)
Carding
15 Marzoli C40 Cards 1987
12 Rieter C4 Cards 1990 , auto can change
Draw Frames
2 Rieter RSB D30 2002
2 Vouk draw frames type SH/D-E 1992
2 Vouk draw frames type SH/D-E 1987
Combing
3 Rieter E62h combers 2002
2 Rieter E60h combers 2000
4 Rieter E7/5 combers 1988
Roving/Speed Frames
1 Marzoli BC16 120 heads, 1992
4 Marzoli BC16 104 heads , 1987
1 Rieter F1/1 120 heads 1991
Ring Frame
4032 - 4 Rieter G10 , 1008 spindles, 40mm rings, 75mm gauge, 2000
4320 - 4 Marzoli NSF 4L , 1080 spindles, 40mm rings, 75mm gauge, 1997
3840 - 4 Marzoli NSF 2L, 960 spindles, 45mm rings, 75mm gauge, 1992
6480 - 6 Marzoli NSF 2L , 1080 spindles, 40 and 45mm rings, 75mm gauge, 1991
5400 - 5 Marzoli NSF 2L Ring frames1080 spindles, 45mm rings, 75mm gauge, 1987
6338 -12 Edera Ring frames 528 spindles each, 48mm rings, 75mm gauge, 1986
Cone Winding
2 Schlafhorst 338, 60 heads, Quantum clearers 2002
2 Schlafhorst 338, 60 heads, Quantum clearers 2000
6 Schafhorst 238, 20/24 heads , Uster Clearers 1992
1 Savio Espero , 20 heads, Peyer clearers , 1992
Laboratory
Uster Tester 4
Uster Tensorapid 3
Others
Steamer
Compressors
Travelling cleaners, etc
Air conditioning

Our range of embroidery machines operate on automatic lift-up mechanism. The needle & the nipple presser foot are automatically lifted up for easier frame exchange at the completion of embroidering. Further, it is provided with excellent thread feeding system that prevents the threads from getting entangled, and cast off.

With the aim to satisfactorily cater to the requirements of our clients, we are supplying wide range of knitting machines that are used for knitting all types of yarns. Due to electronic top tensions it is easier to thread the yarn through.