Water Softening Plants

Softening alone is insufficient for most high-pressure boiler feed-waters and for many process streams, especially those used in the manufacture of electronics equipment. In addition to the removal of hardness, these processes require removal of all dissolved solids, such as sodium, silica, alkalinity, and the mineral anions (Cl¯, SO 4²¯, NO3¯). De-mineralization of water is the removal of essentially all inorganic salts by ion exchange. In this process, strong acid cation resin in the hydrogen form converts dissolved salts into their corresponding acids, and strong base anion resin in the hydroxide form removes these acids. De-mineralization produces water similar in quality to distillation at a lower cost for most fresh waters.

We are looking queries from Punjab, Haryana, Himachal Pradesh and Jammu & Kashmir.

we are the leading supplier Water Purification System like as R.O, softening plant, D.M plant, ETP & STP plant & able to provide as client demands.

We have state-of-the-art infrastructure that has all the required facilities and tools that helps us to check the quality of the products. We have pool of professionals who are highly experienced in this domain.


We are looking queries from Punjab, Haryana, Himachal Pradesh and Jammu & Kashmir.

Sodium zeolite softening is the most widely applied use of ion exchange. In scale-forming ions, such as calcium and magnesium, passes through a resin bed containing SAC resin in the sodium form. In the resin, the hardness ions are exchanged with the sodium, and the sodium diffuses into the bulk water solution. The hardness-free water,termed soft water, can then be used for low to medium pressure boiler feed water, reverse osmosis system makeup, some chemical processes, and commercial applications, such as laundries.

Often, boiler or process operating conditions require the removal of hardness and the reduction of alkalinity but not the removal of the other solids. Zeolite softening does not reduce alkalinity, and demineralization is too costly. For these situations, a dealkalization process is used. Sodium zeolite/hydrogen zeolite (split stream) dealkalization, chloride-anion dealkalization, and weak acid cation dealkalization are the most frequently used processes.

 

We are looking queries from Punjab, Haryana, Himachal Pradesh and Jammu & Kashmir.

• Dealkalizers
• Demineralization plants
• Drinking water treatment plants,
• Effluent treatment plants
• Filtration units
• Pre-treatment plants
• Reverse osmosis plants
• Water softening plants
• Antiscalant for R. O. Plants
• Membrane cleaners
• Filter-media (pebbles, gravels &anthracite)

The company produces Water Softeners which are used to treat hard water. They replace the calcium and magnesium in the water with sodium. They may also remove a small amount of iron or manganese, but they are not recommended if the amount is higher than its workability.


We are looking queries from Punjab, Haryana, Himachal Pradesh and Jammu & Kashmir.

The dedicated Team of scientists at our Research and development laboratory in Delhi, we consistently working on developing tailor made solutions to our end users, our endeavor is to present new products with superior performance and constantly improvise on the existing product line in order to benefit our valued Clients in terms of Cost Economy as well as Results.

OUR PRETREATMENT CHEMICALS:

• CATIONIC POLY-ELECTROLYTES
  
• ANIONIC POLY-ELECTROLYTES
  
•  NON-IONIC ELECTROLYTES
•  INORGANIC COAGULANTS

 

• CLEANFLO–POLY-ELECTROLYTE is an organic synthetic flocculant of high molecular weight based on polyacrylamide that works effectively as flocculation aid in numerous liquid solid separation processes. CLEANFLO– POLY-ELECTROLYTE has strong affinity for surface charges of suspended colloids that leads to destabilization of the suspension. Destabilization and coagulation of large number of single particles leads to formation of voluminous flocs, which are easily separated from suspension.
• CLEANFLO–POLY-ELECTROLYTE is a flocculant that is effective at low dosage level that results in reduced handling and storage cost.
• CLEANFLO–POLY-ELECTROLYTE works at wide pH (1 – 14) and temperature (0 – 100oC) range and does not alter pH of the water to be treated Larger faster settling flocs are formed with CLEANFLO–POLY-ELECTROLYTE, therefore, increase the efficiency of solid liquid separation. Higher solid capture, increased clarity and greater through put are attained withCLEANFLO-POLYELECTROLYTEin water clarification process. CLEANFLO – POLY-ELECTROLYTE generates less sludge and the sludge contains less ash when incinerated.
• CLEANFLO–POLYELECTROLYTE contain very low residual content of monomer acrylamide, therefore, is an environment user friendly product.

We are looking queries from Punjab, Haryana, Himachal Pradesh and Jammu & Kashmir.