Sachin Hydraulics

We are offering hydraulic motors are rotary hydraulic actuators which closely resemble the pumps in construction, these motors are a kind of inner gearing orbit motor on the principle of planetary reduction, there are two forms of distributions with shaft distribution flow or with disc distribution flow. - this product is a simple structure showing good performance under low speed and short time overhauling. Instead of pushing on the fluid as the pump does as output members in the hydraulic system they are pushed by the fluid and develop torque and continuous rotating motion.since both inlet and outlet ports may at times be pressurized most hydraulic motors are externally drained.it has great advantages for its small volume, low weight and high output torque.

We are offering: replacement parts for piston pumps: Rexroth, Kawasaki, Vickers, Sunstrand, Hitachi, Yuken & all major world brands: cylinder block, valve plate, drive shaft, piston shoe & other spares for construction & earth moving machinery.

We are offering hydraulic motors are rotary hydraulic actuators which closely resemble the pumps in construction, these motors are a kind of inner gearing orbit motor on the principle of planetary reduction, there are two forms of distributions with shaft distribution flow or with disc distribution flow.
- This product is a simple structure showing good performance under low speed and short time overhauling. instead of pushing on the fluid as the pump does as output members in the hydraulic system they are pushed by the fluid and develop torque and continuous rotating motion. since both inlet and outlet ports may at times be pressurized most hydraulic motors are externally drained. It has great advantages for its small volume, low weight and high output torque.

Offering solenoid valves DSG01, 03, DSHG-04, DSHG-06 model valves from YUKEN: The direction control valves consists of housing, one or teo solenoids, the control spool & one or two return springs. In the deenergised condition the control spool is held in neutral or initial position by means of return springs.The control spool is operated by wet pin solenoids. The force of solenoid acts via the plunger on the control spool and pushes this from its neutral position to the required end position. This gives free flow from P to A or B & A to T. When solenoid is de-energised the control spool is returned to its neutral position by means of return springs. To guarantee satisfactory operation care should be taken that the solenoid pressure chamber is filled with oil. Solenoid operated direction valves control the start stop & direction of flow.They are also used as pilot valves to operate other valves and so on.
Monoblock direction control valves: (40/ 80 LPM basic valve with manual lever, main relief valve, check valve, cylinder spool, spring centered upto 6 levers)