Tungsten carbide tipped circular saw blades are used on stationary as well as flying sawing machines for all types of metals. Cutting virtually free of burr steel & non ferrous metals, stainless steel & grey cast iron as billets, slabs or sheets in rolling, forging & continuous cast mills. Cuts drawn or welded tubes as well as structural sections, casting joints etc. Specification:

• Material:Supporting Disc are made from alloyed tool steel, hardened and tempered all over.
• Cutting Speed: Ferrous metal 40 to 130 m/min, non ferrous metal 150-500 m/min, aluminium 1000-4000 m/min.
• Feeding Speed: 0.03 - 0.13 mm/tooth.
• Cooling: Cooling with emulsion necessary
• Range: Diameter: 500 - 2200 mm
• Width: 2.0 - 11.0 mm

Blades are used for cutting steel in hot condition >700°C on stationary. They are used in stationary, horizontally operated cutting units of continuous casters and hot rolling mills for billets, rails, structural sections and tubes. Specifications:

• Steel Grade: Material with carbon content depending on the application (the carbon content determines to a large degree the hardness life of material and its susceptibility to cracking)
  • 75Cr 1(1.2003) std for small diameters, hardened & tempered all over, C=0.78%
  • Ck60 for medium diameters often hardened & tempered all over, C=0.60%
  • 51Mn7 for medium (hardened & tempered all over) and large diameter (with hardened tooth tip) C=0.55
  • 46Mn7 for medium (hardened & tempered all over) and large diameter (with hardened tooth tip) C=0.45%
  • Special Steel Grades BL-50, BL-60 & BL-80: Long Blades Life & low addiction to cracking.
• Tooth Pitch: Approx 6.0 to 16.0 mm according to the blade diameter and wall thickness of tube/profile.
• Cutting Speed: 110-150m/s.
• Feeding Speed: 1000 - 2000 mm²/s.
• Cooling: Pressure Cooling with water/li>
• Tooth Form: 30/30* Pendulum Tooth (standard).
• Heat Treatment: Hardened and tempered all over for inexpensive service (only sharpening & no re-hardening)

Friction Saw Blades allow the cutting of carbon steel in cold condition (<100 °C) through dry smelt cutting (friction cutting.) That are used in flying or stationary sawing machines of continuously operating profile or tube production lines or in making grates, fender walls etc. Specification:

• Steel Grade: Material with alloy composition optimized according to the required life of tool. 1.2235CV Chrome-vanadium 80CrV2 std steel grade with good harden ability & tool life for saw blades up to dia 1500mm.51 for flame hardened teeth up to dia. 2500mm.
• Tooth Pitch: Approx 6.0 to 16.0 mm.
• Cutting Speed: 110-150 m/s
• Feeding Speed: 1000 - 2000 mm²/s
• Cooling: As the friction saw melts the cut by means of friction heat, cooling before or during cutting must be avoided. Cooling after the cut with flood water may increase the life of the blade.
• Heat Treatment: Through hardened & tempered usually for diameters up to 1200/1500mm, beyond that size & up to 2500mm the saw body is kept soft, the tooth tip, however, is flame hardened.
• Tooth Forms: 0* friction saw tooth for thin wall tubes & structural sections up to approx 5mm wall thickness. 30/30* pendulum shape for thick walls and approx 6mm and above or solid items.
• Coatings: Single or multiple chrome plating optional for improvement of gliding properties & increase of surface hardness.
• Finish Of Side Faces: Cost

Standard Products Range: Hollow ground finish (standard) side faces are hollow ground and balanced surface.

HSS Saw blades are used for sawing tube or profile with little burr or burr free, Ferrous & Non ferrous metal, stainless steel gray cast iron & all cross section on stationary & flying cutting units in mass production or on continuously operating production line. Specification:

• Material: 1.3343 HSS-DM 05 = Standard 1.3243 HSS~E(CO-5%) with cobalt = Option for improved life (Standard For Cutting Stainless Steel
• Tooth Pitch: Approx 3.0 to 16.0 mm depending on material, cross section & cutting speed.
• Cutting Speed: Ferrous metal 30-150 m/min, non ferrous metal 200 - 1200 m/min.
• Feeding Speed: 0.03-0.10 mm/tooth
• Cooling: Cooling with emulsion necessary
• Diameter Range: 200-600 (630) mm
• Thickness: 1.0-5.0 mm
• Tooth Forms: BW, HZ, BS
• Coatings

Option for improvement of gliding properties & increase of surface hardness. Saw blades are manufactured with unique P.V.D coatings that guarantee product performance. Coated saw blades can be used to cut at very high speeds and feed rates. The excellent wear resistant properties of all our coatings result in prolonged tool life even under most severe working conditions. The Principal advantage of our coatings are:

• Reduction in manufacturing cost.
• High improvement in productivity.

This is a new product line for ferrous metal application. These saw blades have benefit of greater cutting performance. These saw blades are applicable to low speed sawing machines such as Amada, Kasto, Tsune, Everising, Behringer-Eisele, Nishijima, Noritake etc. Throw Away Cermet Tipped Saw Blades are now taking the place of HSS Saw blades, band saw blades & other normal carbide tipped saw blades and dramatically increasing their market share in the metal working industry, due to their superior cutting performance. If you have a discerning eye for high quality industrial tools, you will easily discover the differences in their cutting rate and accuracy. Enhanced durability and overall cutting costs from the other types of saw blades. Specifications:

• High Dampening and noise reducing effect
• Abrasion-resistant tips for high cutting accuracy
• Special effect to prevent the swarf and tar adhere to the subject

For large work pieces which can not be cut with HSS circular saw blades, segmental circular saw blade is used for cutting burr free or little burr. Segmental saw blades are used for sawing tubes profiles solid from ferrous, non ferrous metals, stainless steel & gray cast iron in machine tool industry, car industry, steel construction & locksmith. Specification:

• Material: (Supporting disc is made from alloyed tool steel) 1.3343 HSS D M 05 = standard 1.3243 HSS- E CO-5% With Cobalt = Standard For Cutting Stainless Steel.
• Tooth Pitch: 6.5 to 70.7 mm depending on material, cross section & cutting speed.
• Cutting Speed: Ferrous metal 6 to 30 rn/min, non ferrous metal 60-300 m/min and aluminum 1000 - 3000 m/min.
• Feeding Speed: 0.03 - 0.10 mm/tooth.
• Cooling: Cooling with emulsion necessary.
• Range: Diameter: 250-1410 mm, Width: 4.0-9.0 (9.) mm.

Bi- Metal Band Saw Blades: The Bi Metal band saw blades are used for cutting metal and other non-ferrous kind of steel of various sizes and qualities. The available range of dimension width 6.0 to 80.0 mm and thickness 0.6 to 1.6 mm and all sizes could be supplied either in coils and welded loops cut to the requested length on the sawing machine on which the blade is to be applied all sizes could be supplied with various toothing. The correct toothing depends upon the material to be cut. Band Saw Blade – M-42 –MAXI: Suitable for all steels with tensile strength upto 1400 N/MM2 (HRc – 44), toothing selection of endless welded M-42 Maxi. Band Saw Blade - M - 42 Top Cobalt: Suitable for all high alloy steels like stainless steel, thermo resistance alloys and titanium.

We offer precision tooling systems such as TCT saw blades, PCD saw blades, hogging units, cutter heads with disposable knives for wood working (from Freud Italy). Cutter Heads With Disposable Knives for

• Modular planer cutter heads
• Helical planer cutter heads
• Grooving cutter heads
• Fingure joint cutter heads
• Cutter heads for rebates
• Post forming cutter heads
• Multi radius cutter heads
• Cutter heads for cabinet doors
• Tenoning sets
• Tools for doors
• Raised pane cutter heads
• Panelling & flooring cutter head sets

Multi boring bits, cnc toolings, router bits & special tools to suit customer needs. Material: Freud Manufactures its own carbide by adding titanium to be used in wood industry that improves the life of tips and reduces consequences from resins and glues contained in wood & wood products. For More Details, Please Click On The Image