Sagicofim Air Filters India Private Limited

Our bag in and bag out isolation housings are ideal for the safe control of hazardous airstreams. These housings protect site personnel and the general public by using a proven filtration method. This method is a safe means for the removal and disposal of contaminated filter elements, while maintaining isolation during the installation of clean filter elements. All CTC BIBO isolation housings are fabricated from T304 stainless steel and are pressure tested to exceed industry standards. Our housings can remove particulate, gas, or a combination of both depending on your application.

Housing Details:

• Accommodates adsorber cells
• One access door
• Filters can be changed independently

We offer Cartridge Filters.

Applications: fine particulate filtration in operating theatres

Type: cylindrical minipleat HEPA filters

Casing material: aluminium

Filter media: micro-fibre glass

Protective grids:perforated aluminium mesh

Separators: continuous thermoplastic cord

Sealant: polyurethane

Gasket: one piece closed cells neoprene

EN 1822 class: H 13

MPPS average efficiency ≥ 99,95%

MPPS local efficiency ≥ 99,75%

0,3 µm D.O.P. efficiency  ≥ 99,99%

Final pressure drop: 600 Pa

Maximum air flow rate the nominal flow Delta absolute cartridge filtersrate since high er air volumes adversely affect efficiency grade and laminar flow

Max. operating temperature:  60 °c

Max. relative humidity : 100% RH

Installation : specific applications

Efficiency tests filters individually tested and certified

Type	Model	Díameter Height (mm)	Dimensions Height (mm)	Nominal air flow (m3/h)	Initial pressure drop (Pa)
CB	90	170	175	90	220
CB	130	170	175	130	220
CB	170	170	230	170	220

 

We offer Laminar Flow Absolute Filters.

• Individually leak tested
• Resilient
• Low initial pressure drop
• Wide range of standard sizes
• Complying with FS 209 E
• 69 / 90 / 115  mm profile

Applications: laminar ?ow for clean benches, clean rooms etc.

Type: minipleat construction HEPA ?lters

Frame: extruded anodised aluminium, 69 mm depth

Filter Media: micro-?bre glass

Protective Grids: white epoxy painted microdrawn grid

Separators: continuous thermoplastic cord .

Sealant polyurethane

Gasket: one piece polyurethane, half-round pro?le .

En 1822 class H 14

MPPS average ef?ciency 99,995%

MPPS local ef?ciency.. 99,975%

0,3 urn D.O.P. ef?ciency 99,999%

Final pressure drop. (recommended) 400 Pa - (maximum) 600 Pa

Maximum air ?ow rate: the nominal ?ow rate since high er air volumes . adversely affect ef?cienc grade and laminar ?ow

Max. operating temperature .60°c

Max. relative humidity 90%RH

Installation:  terminal hoods type DIF.P - DIRK - DIRS, clean benches, . operating theatres, clean rooms

Ef?ciency tests: lters individually tested and certi?ed

 

 

The Hospital Line Includes all kind of solutions for Health Care facilities IAQ, Such as DIF.OT Celiling filtration systems for special Surgery Rooms. The system is based on an UNIDIRECTIONAL AIR FLOW  from the celiling with differential velocities decreasing from the center to the perimeter,which guarantees a high sterility level in the operating zone ( CLASS ISO 5) opperational (Simulated). In combination with excellent confort conditions,LOW energy cost and Quick recovery time to obtaine the best result. It is necessary to design and install a proper air exhaust system.

Filtrair is a leading manufacturer of high efficiency melt-blown and high-loft filtration media, as well as vertically integrated specialty filters for use in HVAC, automotive paint and gas turbine applications.

We offer Rigid Pocket Filters.

• FILTRA-PAK rigid pocket filters
• High air flow rate
• Low initial pressure drop
• Non migratory
• Extended media surface
• Robust construction

Applications: filtration of fine particles in air handling units. In air ventilation systems and pre-filtration for absolute filters.

Type: rigid pocket filters

Frame: Polystyrene

Filter media:micro-fibre glass

Sealant : polyurethane

Gasket: none

EN 779 class:F8

Average dust spot efficiency 90 to 95% (ASHRAE 52.1.1992}

EUROVENT 4/5 class EU8

Final pressure drop 450 Pa

Maximum airflow rate 25% of of nominal airflow rate

Max. operating temperature  70 °c

Max. relative humidity 80% RH

Installation: holding frames CT 10 /20 / 30 Type

infilter housings MULTIMOD type:

Type	Model	Height (mm)	Dimensions Width (mm)	Depth (mm)	Media surface	Nominal airflow (m ]/h)	Initial pressure drop (Pa)
RP-H	55	287	592	292	8,9	2500	170
RP-H	56	490	592	292	14,5	4100	170
RP-H	54	592	592	292	18	5000	170
RP-H	55 P	287	592	75	4,2	1500	170
RP-H	54P	592	592	75	8,5	3000	170

 

The design of the terminal hood for HEPA filter in the clean room is most salient to benefit the filtration level as well as to maintain laminar velocity. Wherever higher grade of filtration is required with FFU the performance up to ISO 3 to ISO 5 class canbe assured,  in which hepa / ULPA filter can be perfectly placed. Air entry can be from the top or from the side can be designed.   Advantage of our FFU : Hepa filter alone can be replaced without disturbing te blower and motor.

The Absolute II ULPA filter is a low pressure drop, low power consumption mini-pleat filter. It is the perfect choice for cleanrooms and clean process

We offer Holding Frames.

• Safe & Simpel assembly for Pre, Fine & Hepa filters
• Spring clips locking system for positive and leak free filamnet
• Modular construction
• Galvanized or aluminium steel frames
• Light construction, inexpensive

 

• Filter Installation : is from front side with the help of spring clips which lock the filter in their respective frame (all 4 sides) which has closed cells neoprene gaskets to avoid any air leak

• Specially designed for AHU's and ducts reducing the extra space/area required to mount the heavy metal holding frame (flange type) separately for Pre and Fine filters. 

• Double Filter Fitment: This frame accepts both G4 Pre filter (48mm Depth) + Pocket filter OR rigid pocket filters in the same Holding frame.

• Multiple Bank system arrangement according to your AHU air capacity with easy fixing and removing.