We manufacture charging bucket for steel plant, which are used in top loading of electric arc furnaces. Charging buckets are also available with loose "ladle type," and are offered to clients at competitive prices.

Features:

• They have lifting bales
  
• Each assembly
  
• Close tolerance on density and thickness
  
• Engineered to produce belts for varied applications
  

We have gained the reputation as market leaders in the filed of offering heavy duty corrugating machines. These are capable of handling a variety of sheets and are tuned to deliver high production output. The machines also feature self loading arrangement with twin unwinding shafts for easy operation.

Features:

• Advanced single facer corrugating machinery
  
• Sturdy construction
  
• Motorized loading reel stand
  
• Hand wheels are provided to upper corrugating rolls for adjustment of pressure at any selected setting
  
• One side hand wheel with worm for the adjustment of the pressure roll
  

We manufacture slitting line which is  designed and lined to enable to slits continuously cold and hot rolled steel and galvanized steel in coil, width into prescribe strips and then rewind them in coils again.

Slitting line consist of :

• Coil car
• Uncoiler
• Hold down roll
• Leveler
• Shear
• Side guide
• Slitter
• Scrap winders
• Loop table
• Tension station
• Separator
• Recoiler
• Coil car
• Hydraulic system
• Electrical system
• Lubrication system

We manufacture two types of roller guides for guiding various sections for rod mills operating at high final rolling speeds.

Types:

• Entry Roller Guide
• Exit Twin Roller Guide

Entry Roller Guide     

• The 1000-series is Morgårdshammar´s latest developed
• series of roller guides for guiding of various sections.
• It has been developed with the experience from the very
• successful and well known 900-series.
• The series is available as Single pair Roller guide, SR,
• and Double pair Roller guide, DR.
• The guide line during the development of the Morgårdshammar 1000-series guides have been Strength & Precision which have resulted in a overall upgrading in respect of material quality, tolerances and bearing sizes. This will result in a high accuracy guiding of the rolled product with the benefit of a high quality end product for our customers.
• The 1000-series feature an identical patented central setting arrangement as the 900-series guides. Which means that the guides are equipped with a single point adjustment for setting the distance between the rollers for both SR and DR versions.
• The development on the setting device compared to the 900-series is that the cam is operated by means of a worm gear. The arrangement guaranteeing an absolute accurate setting of the guide rollers and in addition is it self-locking.
• The design also allows the possibility to adapt a remote control device.

Exit Twin Roller Guide     
This Guide represents a complete new range of twisters in a unique design which has been developed with the aim of:

• Cantilever design to increase rigidity and reduce centre height of rest bar.
• Cantilever design allows increase of guide rollers, resulting in increased roller and bearing life.
• This design achieves optimal use of the roll barrel, due to the symmetrical guide design which allows installation in upturned position.
• Due to the unique design maintenance is simplified and with the reduced number of components, spare parts are kept to a minimum.
• All adjustment operations can be carried out with a single 24/36 mm wrench.

Dedicated to excel in the field of cold rolling mill, we specialize in providing innovative and cost effective solutions for new mills as well as for the modernization of existing facilities. In the field of cold rolling, our scope of solutions includes the following:

• 2-Hi and 4-Hi cold rolling mills
• Skin pass mills
• Slitting lines (HR and CR)
• Pickling lines (Cont. & Semi Cont. Type)
• Cut-to-length lines
• Cold roll section forming lines

We provide a single source responsibility for the supply of entire scope of solutions for hot rolling mills, accompanied by a comprehensive service and support package. Amongst the world's leading suppliers, we offer hot rolled products that are virtually equivalent to those produced in hot mills. These are manufactured using superior technology. Some of them are:

• Heavy section mills
• Medium section mills
• Slab mills
• Bloom mills
• Rod mills
• Skelp mills
• Continuous high speed mills

The range of plate rolling machines offered by us rolls plate into shells including rolled rings eccentric cones, concentric cones and repads. These rolled products can be fabricated from our own plate inventory or from customer supplied material.

Features:

• Modern design
  
• Robust steel construction
  
• Delivers high quality alloy steel rolls
  
• Built in cone rolling
  
• Precise controls through push button operation with interlock circuit
  
• Electrical / mechanical overload protection
  
• Centralized lubrication system
  

We offer a range of morgon oil or grease lubrication system, which are designed to feed the bearing of mill stands. These are designed to deliver superior pumping operations. The use of high performance oriented electric motors also allow them to efficiently draw oil from reservoir tanks. 

Features:

• Incorporated with electric motor driven gear pumps to draw oil from reservoir tank
  
• Check valves are after the pump to prevent the back flow of oil.
  
• Water cooled heat exchanger to bring down the temperature
  
• Light & compact, hence easy placeable and shiftable

100 NB piping helps in oil passing and its distribution to the bearings as per the requirements. The return oil is brought back from bearings to the settler through 150NB piping.

We manufacture and supply a broad range of hydraulic shear machines (especially 800 shear and flying shear). These are offered under three ranges such as hydraulic, mechanical and pneumatic. Used for cutting for squares, bars and similar products, we also have capability to offer these on customized basis, as per the clients requirements and specifications

Features:

• Used for cutting for squares, bars and similar products
  
• Available in steel fabrication
  
• Fully automatic with pneumatic controls
  
• Capable to cut hot ends during rolling
  
• Available in fixed and swiveling type
  
• High quality circular blades with angular edge
  

Twin channel machines offered by us find application in the rolling mill plants. These are available up to bar sizes of 40mm in die and offer solution to high speed handling of bar at cooling beds. The machines are also designed to make it possible for working in conjunction with braking pinch rolls, minimizing the length of run-in.

Features:

• Offers solution to bar handling at cooling bed at high speeds
  
• Available for bar sizes up to 40mm in die
  
• Stock speeds as high as 25 mtrs per second.
  
• An excellent system as it carries the bar in a closed channel, minimizing the accident hazards.
  
• Designed feature makes it possible to work in conjunction with braking pinch rolls, minimizing the length of run-in
  
• Automated operation guided by the discharge of the rods from dividing shear.
  

We offer clients precision engineered range of gear boxes, pinions and stands. These are designed and manufactured to meet the specific functional needs of the given processes. The products are produced using superior grade hardened, forged and tempered alloy steel, which are also provided in the end product durable service life standards.

Features:

• Hardened, forged and tempered alloy steel
  
• Caged in a sturdy fabricated steel housing
  
• Durable construction to bear overloads
  
• Available in 2Hi/ 3Hi configurations
  
• MIG welded and is tested by non-destructive weld testing
  
• Ultrasonic tested 
  

Our range of products also consists of volume hardened gear boxes and pinion stands. These are designed to meets the functional needs of our clients. These are explained as follows:

• Gear boxes: Our gear boxes are designed to be particularly used for driving of roughing and intermediate trains. These are hardened, forged and tempered alloy steel. The gear boxes are caged in a sturdy fabricated steel housing. These are made durable to bear overloads that result due to flywheel fitted on the input shaft.
• Pinions: Our precision engineered pinions are used in roughing and intermediate mill trains. They are available 2 Hi/ 3Hi configurations. The pinions are made of hardened and tempered alloy steel. The pinions are also caged in a sturdy fabricated steel housing. It has a durable built which enables it to bear loads resulting due to rolling.