Saksham EngineersSaksham Engineers

Boge Screw Air Compressor

Share: FacebookTwitterStumble
Boge Screw Air Compressor Series With Frequency Control automatically adjusts to the air demand whilst controlling the pressure perfectly. In the event of a change of the pressure value, the output automatically adjusts. For eg. bar machine regulated to an 8 bar yields a correspondingly higher output–without any expensive remodelling or design related modifications.



Industrial Screw Air Compressor
Large View

Industrial Screw Air Compressor hot

Industrial Screw Air Compressor VFD - SF (45 KW - 110 KW)

Reliable -
the energy saving solution for fluctuating demands SF Frequency Controlled Series. Eliminate off load running, even out demand fluctuations and save energy. The SF series works strictly in accordance with the compressed air demand by producing the exact volume of compressed air at the pressure required.

Correctly specified frequency controlled compressors eliminate idling time and even out air demand fluctuations. Energy costs can therefore be reduced considerably.

Continuous flow regulation from 25-100%:

  • universally adaptable to changing operating conditions

Constant system pressure:

  • no energy costs arising from generating unnecessary pressure (1 bar excess compression equals 6-10% increase in energy costs)

Smooth start-ups and run-downs in a matter of seconds:

  • little wear on components and short reaction times

Easy to integrate into existing compressed air stations:

  • easy optimization of compressed air supply

Complete product range based on standard modules:

  • universal applications

Start-up power within the nominal power range:

  • practically no power peaks during start-up

Practically no idling time:

  • large potential saving on energy costs

Adapting the amount of free air delivered to compressed air demand is the most economical operating method where demand for compressed air fluctuates considerably or where the stored volume is very small or when operating below peak load.

Benefits of frequency control:

  • Smooth starts and stops within seconds
  • Continuous volume flow regulation from 25 to 100 percent
  • Flexible adaptation of f.a.d.
  • Wear and maintenance costs minimized
  • No power-peaks during start-up (energy saving!)
  • Constant network pressure +/- 0.1 bar (energy saving!)
  • Nearly no idling (energy saving!)

The SF series models are available in the following pressure ranges: 8 bar, 10 bar and 13 bar. Due to their continual flow regulation ranging from 25% to 100% they cover free air delivery in the range of 45 kW and 110 kW.

The SF series models have a frequency converter and separate control integrated into the switch cabinet in a space saving manner. The efficient control of the compressor is a standard feature in the SF series. The current operating conditions of the machine are displayed clearly and precisely in the LCD display.

SF series screw compressors can be ideally integrated into any existing compressed air station.

Effective FAD: 62 - 650 CFM
Pressure range: 8 - 13 Bar




Boge Screw Air Compressor

Boge Screw Air Compressor with VFD - CF/CDF

The ideal operating mode -
The frequency controlled CLF series automatically adjusts to the air demand whilst controlling the pressure perfectly. In the event of a change of the pressure value, the output automatically adjusts. For example a 13 bar machine regulated to an 8 bar yields a correspondingly higher output without any expensive remodeling or design related modifications.

This is as efficient as it gets (CF SERIES 15 KW - 22 KW) -
With these frequency controlled compressors you can rest assure that lower compressed air demand translates into reduced energy consumption with the frequency inverter continuously adjusting the volume flow to the actual demand. This leads to minimized idling times and pressure fluctuations. Soft starting also avoids undue wear and tear and prolongs the service life of the compressor.

Maximum efficiency -
The BOGE C series up to 22 kW is characterized by its industry leading specific power ratios for efficient compressed air supply.

Frequency control -
The optional frequency converter (CLF-/CLDF series) ensures a continuous volume flow between 25 and 100 percent. This allows adaptation to the momentary demand of the compressed air system. Soft starting also avoids undue wear and tear and prolongs the service life of the compressor.

Refrigerant dryer -
The CDF series include an integrated refrigerant dryer for extremely high compressed air quality.

Control -
The compressor is controlled by the focus control system which includes an integrated efficiency display as well as additional monitoring and control options. Focus is programmed as a changeover switch and can control up to three machines.

Economical due to flexibility -
By adjusting the air end speed utilizing frequency regulation not only adjusts the output (FAD) but can also adjust the pressure (bar). The CLF machines can therefore operate at 8, 10 or 13 bar pressure without compromising free air delivered. To regulate a normal 13 bar compressor to 8 bar reduces the pressure but the output remains at the 13 bar design figure. The direct driven CLF utilizes frequency regulation in order to maximize FAD output whether at 8, 10 or 13 bar.

CLF Series -
Direct  coupled, reduces transmission losses to a minimum. The BOGE CLF series combines a direct coupled drive system with frequency control to provide the ultimate compressor for pressure control under variable output requirements.

The CLF series operates the aired within its optimum range and by changing the speed of both motor and rotor the compressed air output adapts to the actual demand. Expensive idling times and motor switches are avoided. At the same time a tighter pressure band can be set, also helping to save energy.

Effective FAD: 9 - 127 CFM
Pressure range: 8 -13 Bar


Boge Screw Air Compressor
Large View



Industrial SCR Compressor
Large View

Industrial SCR Compressor

Industrial SCR Compressor with VFDEW AIR C - SLF (30 KW - 200 KW)

Saving energy & space - High output with total control
(SLF/SLDF SERIES 30 KW - 200 KW). Adjusting the motor speed to fulfill the varying free air delivery requirements is the most efficient operating method when the system has considerable fluctuations, limited air receiver capacity or when the compressor is operating as peak load compressor.

Refrigerant compressed air dryers -
The frame mounted refrigerant dryer has a pressure dew point of +3°C (DIN ISO 7183) and simply drops into the top of the screw compressor cabinet enabling simple maintenance or removal if ever necessary.

Energy saving -
Tighter/reduced system pressure virtually eliminates off load running, In turn reduces start up current peaks and contributes to potential energy savings of up to 40 %.

Advantages of frequency control:

  • Smooth starting and stopping within seconds
  • Continuous volume flow control from 25 to 100%
  • Flexible adaptation of free air delivery
  • Reduced costs for wearing parts and maintenance
  • No start-up current peaks (energy saving)
  • Constant net pressure +/- 0.1 bar (energy saving)
  • Almost no idle operation (energy saving)


SLF/SLDF SERIES:

  • Matches demand perfectly
  • Controls pressure precisely
  • Optional radial fan or super silencing for significant sound pressure reduction
  • Option with integral refrigerant dryer, the ultimate energy saving and space saving solution


The BOGE
SLF/SLDF series combines a direct coupled drive system with frequency control to provide the ultimate compressor for pressure control under variable output requirements.

In this direct coupled series the frequency convertor assures the smoothest possible transition from 25-100% to maintain pressure and output perfectly.

An energy efficient RATIO control is also a standard feature of the SLF/SLDF series. The respective operating conditions are clearly and precisely visible via an LCD display.

The SLF series operates the aired within its optimum range and by changing the speed of both motor and rotor the compressed air output adapts to the actual demand. Expensive idling times and motor switches are avoided. At the same time a tighter pressure band can be set, also helping to save energy.

SPECIAL FEATURES:

  • By adjusting the aired speed utilizing frequency regulation not only adjusts the output (FAD) but can also adjust the pressure (bar)
  • The SLF series compressors can therefore operate at 8, 10 or 13 bar pressures


EFFECTIVE FAD: 37 - 1225 CFM
PRESSURE RANGE: 8 - 13 Bar




Air Compressor

Boge Compressed Air System to meet the requirement of your Pet Bottle Application - BOGE FLEXIPET has been designed for total flexibility and convenience. The individual components can be assembled on-site according to specific requirements and the prevailing site conditions. A screw compressor generates air to 11 bar which is then dried to pressure dew point of -40°C. Boosters then make the required operating pressure up to a maximum of 40 bar. This pressure control saves energy.

BOGE PET COMPRESSED AIR PLANTS -
Manufacturers of PET bottles rely on BOGE compressed air plants. Their ability to adapt to the air demand actually needed for the production of different bottle sizes during operation is simply convincing.

FLEXIPET -
These are the energetically efficient and dependable PET compressed air plants from BOGE for oil free quality compressed air from 10 to 40 bar. The performance of the screw compressor in the FLEXIPET plant is continuously controllable. This enables considerable savings because idling is reduced to a minimum. The constant operating pressure serves to avoid unnecessary and extremely expensive excess compression. The BS - Booster Line is engineered to combine the complementary oil free screw and piston compressors without any additional treatment. And the oil free series does everything in one step and without the need for any intermediary pressure.

BOGE PET -
Compressed air plants are designed to directly generate control air. Without detour and without the support of any increased compression up to 40 bar and according reduction. This means saving up to 40 % of energy costs. Our PET compressed air plants are another example of our competence: BOGE products stand for flawless quality and highest efficiency.

HIGHEST QUALITY -
BOGE FLEXIPET produces technically oil free and dry blow air without any oil vapors or odors. The use of BOGE Food Lub H1 oil guarantees the highest FDA quality compressed air

FLEXIBLE DESIGN - BOGE FLEXIPET is supplied with an air cooled screw compressor with the required FAD to meet demand. They come with proportional control in order to virtually eliminate idling. Water cooled versions are optional.

MAXIMUM EFFICIENCY -
The BOGE FLEXIPET allows you to generate as much compressed air as is actually needed at the pressure required to a maximum 40 bar pressure. By doing so this eliminates unnecessary pressure generation and saves energy. Several boosters are simultaneously controlled by mean of an intelligent control system.

EFFECTIVE FAD: 55 - 636 CFM
PRESSURE RANGE: 40 Bar


Air Compressor
Large View
{short description of image}




Contact Us

Saksham Engineers
Mr. Shishir Mathur (Proprietor)
Plot No. 98/4, Power House Colony, Near N. H. P. C., Sector - 33
Faridabad - 121003, Haryana, India

Contact via E-mail





Member IndiaMART.com © Saksham Engineers. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Contact Us

*Describe Your Requirements in Detail
Remaining Characters: 3500
Your Contact Information
Your Contact Information
*Name:
*Email:
Company:
Website:
*Country:

City:
*Mobile:
*Enter the code: