BOSTIK worldwide No. 1 adhesive company has been synonymous with sealants and adhesives since the turn of the century. Today BOSTIK is a multinational company of 4,500 employees with 55 production facilities and sales operations in 46 countries across five continents with a magnificent range of products in the field of : - Adhesives & Sealants
- Coatings & Floorings
- Waterproofing all ranges
- Concrete admixtures
- Grouts & Repairs
- Insulation & sound deadening
- Accessories
- Anti-seize & lubrication compounds
- Solvent & cleaners
And many more …….. BOSTIK’s parent Company is TOTAL worldwide fourth largest publicly-traded integrated international oil and gas company* and a world-class chemicals manufacturer, TOTAL operates in more than 130 countries and has 96,400 employees. |
 |
Seal N Flex 1 Polyurethane Construction Joint Sealant
Seal ‘n’ flex 1 is a low modulus, one component, class a polyurethane sealant. When cured it will form a tough, flexible seal capable of cyclic expansion and compression movement of 50% (+25%) of the original joint width. Seal ‘n’ flex 1 is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra- violet radiation, ozone, atmospheric contamination and pollution. Its excellent weatherability enables it to retain its original properties after years of exposure, refer to the csiro rilem long-term sealant durability study dbce doc. 97/196 (m).
Recommended uses:
sealing expansion / construction joints in :
• insitu concrete.
• precast and tilt up panels.
• brick & blockwork.
• plasterboard.
• aluminium windows.
• granite, sandstone and marble.
• grc, fibreglass & speciality panel systems.
• metal curtain wall.
• water tanks.
• sealing contraction / longitudinal / expansion joints in concrete roads.
Features & benefits:
• low modulus 50% (+25%).
• excellent durability.
• acoustic rated.
• one component, no mixing required.
• australian made.
• colour range.
• paintable (refer limitations).
• non staining.
Approvals / standards:
• csiro rilem long - term sealant durability study dbce doc. 97/196(m).
• iso 11600 - class f-25 lm.
• din 18540 (german), snjf (french) & bs 4254-
1983 approval as a low modulus external joint sealant.
• astm c. 920-87 & 98 (usa) as type s, bs 5212
part ii 1990, grade ns, class 25, g,a,m & o as an external joint sealant.
• as4020 1992 potable water approval.
• as1157 - 1972 resistance to fungal growth ministry and agriculture and fisheries new zealand(meat, fish, game, poultry).
|
|
|
|
|
|
|
Fireban One Fire Rated Polyurethane Sealant
Fireban One is a fire rated, single component, low moduluspolyurethane sealant, curing via airhumindity or moisture toform a elastomeric weatherproof firerated seal. Fireban One is a class . A polyurethane sealant, whencured it will form a tough, flexible seal capable of cyclic expansion and compression movement of 50% (+25%) of the original joint width. Fireban One i virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra violet radiation, ozone, atomospheric contamination and pollution.
RECOMMENDED USES:
• Sealing of expansion and construction joints in precast.
• Sealing joints in insitu concrete block and brick work.
• Penetration and core hole sealing in conjunction with fire collars or pillows or in areas requiring intumescent sealing.
• Sealing joints that require acoustic rating performance.
FEATURES & BENEFITS:
• High Durability.
• Excellent weathering resistance.
• Can be over painted.
• Non staining.
• 50% total joint movement max.
• Australian made.
• Excellent acoustic ratings.
• Fire rated up to 4 hours.
APPROVALS / STANDARDS:
• AS 1526 - 1973.
• ASTM C920 - 1986.
• BS4254-1983.
• Fire Test Certification to AS1530 -4 (1990), AS4072 -1 (1992) and BS476-20 (1987)
• Acoustic certification to BCA Standards.
• BOMBA Approved (Malaysia).
• SISIR Approved (Singapore).
|
|
|
|
|
Colour Seal Acrylic Joint Sealant
Bostik Colour Seal is a strong, highly flexible (total 20- 25%),anti-fungal, mildew resistant acrylic gap filler. Colour Seal is designed for internal and external applications for vertical sealing requirements where a flexible sealant is required. Bostik Colour Seal offers excellent adhesion properties when cured and is more flexible than conventional acrylic gap sealants with minimal shrinkage.
RECOMMENDED USES:
• Bathroom, kitchen and laundry.
• Sealing gaps in plasterboard, brickwork, timber,concrete, cement sheet and ceramic tiles.
• May be painted with conventional available paints.
• May be use where sealing is required for internal vertical joints.
• Window and door perimeter sealing.
FEATURES & BENEFITS:
• Anti - fungal.
• Extensive colour range available.
• Good adhesion to most building materials.
• May be over painted.
• Excellent flexible properties.
• Water based technology, water clean up.
• Non slump.
• Interior / Exterior use.
• Australian made.
Appearance Smooth, paste like consistency
Colour Various
Chemical Type Water based acrylic
Specific Gravity 1.5
Service Temperature -200C to +750C
Tack Free Working Time 15 mins @ 200C
Total Max Joint Movement Upto 20%
Max Joint Width 25mm.
Results are after seven days cure@250C and 50% RH.
|
|
|
|
|
Bostik Erm Epoxy Repair Mortar System
Bostik ERM is a three component system based on specially formulated epoxy resins and hardeners, especially for repairs and rehabilitation of concrete structures.Many factors contribute to the damage of the structures like the natural factors, ageing, weathering, earthquakes, fire accidents or exposure to aggressive environment resulting in atmospeheric chemical corrosion, faulty design etc., With the help of Bostik ERM, it is possible to repair and strengthen the concrete to a great extent. This product can also be used for sealing of cracks, bonding old concrete to new concrete and for foundation grouting.
USES:
It is an ideal material recommended for:
• Bridges.
• Highways.
• Airport runways.
• Residential and commercial buildings etc. for various applications as stated above.
ADVANTAGES:
• Fast setting
• Very good strength properties
• Local patch up can be done
• Negligible shrinkage
• Solvent free
COVERAGE:
Primer E1 - As primer 0.2 Kg / m2 / Coat.
Bostic ERM - As mortar 2-2.1 kg / m2 / mm
PACKAGING:
Unit pack of Base, Hardener and Filler - 15, 30 kg
|
|
Epu Sl 1000 PU Self Levelling Flooring
Bostik EPU SL 1000 / 2000 is a self leveling, EPU based pigmented topping. It has excellet flexibility and adhesive properties.
RECOMMENDED USES
Bostik EPU SL 1000 / 2000 is a flooring system for cementitous surface such as concrete, plaster, asbestos cement. The main fields of application are floors, where hygiene or high abrasion resistance is required like hospitals, pharma, food, breweries, automobiles, airport hangers, and other heavy engineering industries.
FEATURES & BENEFIT
• Very hard impact and abrasion resistant.
• Weather and water proof.
• Resistant to waste and sea water.
• Suitable for organic and inorganic acids, dyes and mineral oils.
• Coated surface can be steam cleaned.
• Impermeable to carbon dioxide, thus protects concrete against
carbonization.
|
|
|
|
Superfixall High Strength & Flexible Tile Adhesive
Superfixall is an exceptionally high strength, fast setting, high quality waterproof adhesive developed to bond all types of ceramic tiles, fully vitrified tiles, as well as natural stone, marble, granite and mosiac tiles onto brickwork, cement render and concrete walls and floors. Suitable for both internal, external & tile on tile application.
Benefits:
• high strength bond.
• no odour.
• economical.
• water cleanable.
• non toxic.
• easy to spread.
• interior / exterior use for wall and floor.
• thick & thin bed application.
Recommended for:
• concrete.
• cement render.
• brickwork.
• blockwork.
• swimming pools.
• tile on tile.
Installation:
surface preparation : all surface must be clean, dry, free from dust, grease, wax, oil, curing compounds and all other contaminants likely to prevent the adhesive bonding.
concrete should be allowed to cure for at least 28 days and cement render 7 days prior to tiling. A wood float finish is preferred.
Expansion joints:
movement joints should be incorporated in the tile layout.
Mixing:
30 kg. Of superfixall powder requires approx. 7. 2 to 7. 8 litres of water which produces 20. 4 litres of mixed product. Mix superfixall and water in the ratio 3:1 by volume. Add a measured amount of water into a clean container and sprinkle superfixall powder slowly into the liquid with constant stirring. Eliminate lumps. Mix to a thick paste consistency. Allow to stand for 2 minutes then remix. The adhesive is now ready to use.
|
|
|
|
|
|
|
Fixall Ceramic Tile Adhesive
Fixall is rigid set, high quality cement based adhesive suitable for most types of ceramic wall and floor tiles. Fixall is suitable for thin and thick bed applications onto rigid substrates, including concrete, cement renders, brickwork & blockwork.
Benefits:
• high strength bond.
• no odour.
• economical.
• water cleanable.
• non toxic.
• easy to spread.
• interior use for wall and floor.
• thick & thin bed application.
Recommended for:
• concrete.
• cement render.
• brickwork.
• blockwork.
Installation:
surface preparation : all surface must be clean, dry, free from dust, grease, wax, oil, lattice curing compounds and all other contaminants likely to prevent the adhesive bonding. Concrete
should be allowed to cure for atleast 28 days and cementrender 7 days prior to tiling. A wood float finish is preferred.
Expansion Joints:
movement joints should be incorporated in the tile layout.
Mixing:
30kg. Of fixall powder requires approx 7. 2 to 7. 8 litres of water which produces 20. 4 litres of mixed product. Mix fixall and water in the ratio 3:1 by volume. Add a measured amount of water into a clean container and sprinkle fixall powder slowly into the water with constant stirring. Eliminate lumps. Mix to a thick paste consistency. Allow to stand for 2 minutes then remix. The adhesive is now ready to use.
|
|
Bostik Esm Epoxy Screed Mortar System
Bostik esm is a solventless three component screed mortar based on epoxy resin technology.
Uses:
bostik esm is an expoxy screeding material ideally suited for floors and walls subjected to mechanical loading and chemical exposure. Its usage is recommended for all factories, like fertilizers, paper, textiles etc. , in food industries like beverages, sugar and confectionaries, in water treatment and sewage treatment plants etc. Bostik esm can be used as a flooring where high
traffic is expected like highways,airportsetc.
Advantages:
• fastsetting.
• very good strength properties.
• local patch up can be done.
• negligible shrinkage.
• solvent free.
Application Instructions:
surface preparation :
concrete surface should be free from contaminants and dust by sandblasting. In case sand blasting is not possible, thorough abrading with a hard wire brush can be used, though it is not as efficient. Otherwise, acid etching using 1 part of hydrochloric acid with 2 parts of water can be carried out. The solution should be brush applied over the surface liberally and left in contact for 15 minutes. Then it is washed off with plenty of water followed by thorough drying with hot water. The pre-requisites for good adhesion of the coating are cleanliness, roughness and dryness of the surface. Unless these are ensured by proper surface preparation, a successful performance cannot be guaranteed. Apply thoroughly mixed primer e1 onto prepared substrate by brush roller. Mix thoroughly with slow speed stirrer, bostik esm, pre weighed base & hardener first and then add filler slowly. Continue to stir till uniform mix is attained. Spread mix mortar evenly on tacky primed surface for desired thickness by steel / wooden trowel. Wooden / steel reference guide can be used to maintain required thickness. Smoothen it up by pressing with steel trowel.
|
|
|
|
|
|
|
BOSTIK CCC Concrete Curing Compound
Bostik CCC is a wax based concrete curing compound which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penertrating continuous film immediately upon contact with a cementitious surface. This imprevious film prevents excessive water evaporation, which in turn permits more efficient cement hydration, thus reducing shrinkage and incresing durability. Once formed, the membrane will remain on the concrete surface until eventually broken down or eroded by natural weathering. Where it is required to apply a further treatment to such concrete surface, it may be necessary to remove the membrane remaining after curing by wire brushing or other mechanical means. APPLICATION:Exposed concrete slabs : Bostik CCC should be spray applied on to the newly placed slab as soon as possible after it is free from visible surface water, may be 1 to 2 hours after placing. Shuttered and precast concrete : Bostik CCC should be spray applied to all surfaces as soon as formwork has been removed or the element demoulded. In all cases the nozzle of the spray should be held approximately 450mm from the concrete surface and should be passed back and forth to ensure complete and even coverage. The pump pressure should be maintained at a level to produce fine spray. USE:For curing concrete in all applications wherever required. Recommended areas of use include : - Pavements, Runways and bridge decks, Chimneys, vertical structures, air ports and ports
- Bridge roofdecks, retaining walls, columns, canal linings, dams etc.
- Precast piles and in all not-easily accessable areas of concreting
- Industrial floor slabs, parking and garages, terrazo floors, warehouses etc.
ADVANTAGES: - Avoids the need for 28 days conventional water curing using hassien, polythene etc.,
- Minimises risk of drying, shrinkage, cracks etc. at early age of concrete.
- Alows complete cement hydration.
- Easy to use and saves on labour costs.
- Free of any Chlorides and does not affect the setting time on concrete.
|
|
Techflow Epoxy Grout High Performance Pourable Epoxy Grout
Techflow epoxy grout is a two component, high performance, solvent free, prefilled epoxy liquid, suitable for use as a pourable or trowelable grouting material and in bonding new to old concrete. Bostik patchfix coarse & fine fillers may be added to produce a trowelable high build mortar or a pourable flowable grout. Recommended Uses: - suitable for use on damp substrate.
- grouting heavy duty supports beneath crane and transporter rails.
- anchoring bolts, bar and fixings.
- adhesive promoter.
- filling in holes, cavities.
- repairing cracks in horizontal surfaces.
- grouting of column bases.
- as a protective coating for concrete and steel structures.
- reinforcement bar primer.
- corrosion protection on steel reinforcement prior to application of concrete repair mortar.
- as a high strength repair mortar when mixed with
- patchfix fine filler.
Features & Benefits: - high flow properties.
- bonds to damp substrates .
- rapid hardening and strength gain.
- high chemical resistance.
- pre-measrued kits make ease of use.
- high tensile and compressive strength 100% solids epoxy.
- excellent adhesion to most substrates.
- cures at temperatures down to 50c.
- negligible shrinkage.
- high mechanical strength.
- solvent free.
Coverage:i litre will cover 1m2 at 1 mm thick. As a epoxy bonding agent for new to old concrete, coverage rate 4-5m2 / litre
|
|
|
|
|
|
|
Moisture Seal Epoxy Water Vapour Barrier
Moisture seal is a two component, high performance, water- based epoxy waterproof vapour barrier membrane to prevent water seepage and permeation for floors, walls, water tanks, reservoirs and water retaining structures.
Recommended Uses:
as low vapour transmission barrier membrane prior to the application of bostik ultraset timber flooring adhesive.
as a low water vapour transmission barrier membrane coating in the building and construction industries and as a barrier coating over “green”, freshly laid concrete.
as a waterproofing membrane to prevent water seepage or moisture penetration through to the interior of walls and floors.
as a waterproof membrane, curing compound and barrier coating over freshly laid hardened (green) concrete either as a internal finish or prior to the application of conventional floor and wall coverings such as tile adhesives, carpets or conventional building paints.
as a waterproofing vapour barrier in tanking applications and sealing over damp concrete surface either as an internal finish coating or prior to over coating with other coatings.
a highly tolerant membrane / barrier to prevent water seepage or permeation for floors, walls, water storage tanks or reservoirs and swimming pools.
safe to use in sensitive locations (e. G. Around food or habitable areas).
may be used as a waterproof primer prior to the application of ultraseal, boscoseal pu, one and two
part polyurethane sealants or cementitious floor screeds.
Features and benefits:
• environment friendly.
• easy clean - up using water.
• cured membrane will withstand high levels of hydrostatic pressure upto 25 metre head of water or 250 kpa.
• can be applied to damp surfaces.
• potable water approval.
• can be safety applied to freshly laid hardened (green) concrete.
• non-flammable, negligible odour and toxicity.
• has excellent adhesion to most substrate including brick, masonry, concrete, block concrete, compressed fibreboard, stone and timber.
• convenient equal part mixture ratio (by volume).
|
|
|
|
|
Membrane App Modified Bitumen Waterproofing Membrane
Bostik Torch on Membrane is an economic plastomeric waterproofing membrane, manufactured in an advanced continuous calendaring process by saturating and coating a synthetic carrier with a waterproofing compound made of a special grade of bitumen, modified with APP polymers and fillers. While the modifiers enhance the thermal, mechanical and ageing properties of the membrane compound, the mechanical characteristics of Bostik Torch on Membrane are established d by the non woven Polyester carrier, which acts as the reinforcement that provides the membrane with tensile strength, tear resistance, puncture resistance and elongation. The upper surface of Bostik Torch on Membrane is covered with an anti-adhesive finish material, whereas the lower face is laminated with a thermo - fusible Polyolefinic Film.
USES:
Bostik Torch on Membrane is used in protected roofing and waterproofing applications in a single layer system and recommended as a base layer in multi layer systems in various applications. Bostik Torch on Membrane is suitable for damp-proofing and waterproofing application in low cost housing with small roof areas.
SURFACE FINISH:
The lower surface of Bostik Torch on Membrane is laminated with a Polyolefinic film, while the upper surface is covered with one of the following surface finish materials: Fine Sand
& Polyolefinic Film.
APPLICATION:
Bostik Torch on Membrane is usually applied by using a propane torch. The substrate surface must be clean, dry, smooth and free from any irregularities. According to the surface conditions, a coat of primer may be required prior to the application of the membrane. Bostik Torch on Membrane can be applied to the substrate fully bonded, semi bonded or loose laid, the method of adhesion to the substrate shall be decided according to the waterproofing system design. Side laps should
be from 8-10 cm, while end laps should be from 12-15 cm.
TYPE APP SIZE
3 mm 1 m x 10 m
4 mm 1 m x 10 m
STORAGE & HANDLING:
Bostik Torch on Membrane rolls should be kept in an upright position in a flat, dry properly ventilated and sheltered storage area.
|
|
Boscoplast Sp 330 High Range Water Reducing Superplasticiser
Boscoplast sp 330 is chloride free, high range water reducing super plasticiser. It contains sulphonated napthalene polymers and is specially formulated to impart rtheoplastic qualities to concrete. Boscoplast sp 330 is specially formulated for high degree of workability and slump and high quality of concrete with reduced permeability. Boscoplast sp 330 meets the requirements of astm c494 (type a and f) and bs 5075 for high range water-reducing admixtures. Also confirms to is 9103-1999 Recommended for: - all types of concrete mix in which high strength and very high flowability are required.
- pre - cast concrete.
- ready - mixed concrete.
- pumpable concrete.
Features and benefits: - very high workability.
- high water reduction.
- high impermeability and strength. Improved durability.
- superior cohesion.
- no segregation even at high workability. Excellent concrete quality.
- low shrinkage and creep better dimensional stability.
compressive strength: boscoplast sp 330 improves compressive strength considerably. workability: boscoplast sp330 increases the workability of concrete and the retention considerably. Retention depends on the ambient temperature, types of cement, aggregates used, dosage of boscoplast sp330 and method of transport. Higher dosages provide longer retention. compatibility: boscoplast sp330 is compatible with all types of cement, other cementitious materials like pfa, ggbfs and microsilica, except high alumina cement. Slump retention: boscoplast sp330 maintains workability of fresh concrete for a per -determined time depending upon the dosage. cohesion: improves cohesion & surface finish and minimises segregation.
Technical support:bostik provides technical service on concrete mix designs and site trials to select the suitable admixture.
|
|
|
|
|
