• Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.
  
• Transducer models are available for special application, including for coarse grain material and high temperature applications.
  
• Two-Point Calibration function.
  
• Two work modes: Single point mode and Scan mode.
  
• Coupling status indicator showing the coupling status.
  
• Auto sleep and auto power off function to conserve battery life.
  
• Memory for 20 files (up to 99 values for each file) of stored values.
  

• Shore-A Digital Rubber hardness tester
• Shore-A Analoug Rubber hardness tester
• Shore-D Digital Rubber hardness tester
• Shore-D Analoug Rubber hardness tester

LIQUID PENETRANT TESTING MATERIAL

MAKE:-PMET.BARODA.GUJARAT

AVAILABLE:-

1.400ML (SPRAY).

2.1LTR, 5LTR (TIN)

We offer high qualily material of dye penetrant testing.We also provide company  test certificate of dye penetrant testing material.

We r Authorised Dealer of P-met company.

P-met  Company  Dye penetrant material approved by  Third Party Agencies  and Government Companies.

We have  Pmet brand all grade dye penetrant material.

• V1 IIW type, conforming to IS - 4904 - 82, with wooden box and handle, Material MS
  
• V2 Miniature Calibration block conforming to IS - 4904 - 82 with wooden box, Material MS / SS
  
• VW Step block with Different steps from 1mm to 10mm, Material MS/ SS
  
• AA Area / Amplitude Set ( 1 set = 8 blocks)
  
• DAA Distance / Area Amplitude Set ( 1 set = 10 blocks)
  
• DA Distance / Amplitude Set ( 1 set = 19 blocks)

• LEMO 1 TO LEMO 1
  
• LEMO 1 TO LEMO "00"
  
• LEMO 1 to LEMO "00" ( Dual Type )
  
• LEMO 1 to BNC
  
• BNC to LEMO "00"
  
• BNC to LEMO "00" ( Dual Type )
  
• LEMO "00" to LEMO "00"
  
• LEMO "00" TO LEMO "00" ( Dual Type)
  
• BNC to BNC
  
• LEMO "-1" to Microdot
  
• BNC to Microdot
  
• LEMO "00" to Microdot

UNIVERSAL WELD GAUGE

UNIVERSAL WELD GAUGE, equivalent to English and Japanese Universal welding gauges, is a multi-purpose weld gauge intended for general dimensional inspection of welded fabrications, where close toleranes are not expected. It is not used where high accuracy is needed.

Many years of experience have resulted in substantial improvements, co-planer marks

on segment and scales and the provision of knife-edges against scales eliminate parallax in readings. The new adjustable scale strip allows calibration to account for wear of the pointer. All scales are easier to read and on some the range has been increased.

The gauge is made from stainless steel, is virtually indestructible and is supplied in a plastic packet case.

The ability to measure very quickly, misalignment (High-Low), depth of undercut, depth of pitting (to a reasonable accuracy; where exact measurement of the depth of a pit is required a special pit gauge should be used), excess weld metal of capping size is particularly useful to check work to pipeline specification(API).

we r Authorised dealer cum of Mitutoyo,Baker,Insize,Yamayo,Aerospace,kristeel-shinwa,graphica ,brands

We have all measuring  instruments like
1.varniar,
2.micrometer
3.dial indicater
4.magnetic stand
5.height gauge
6.bevel protecter
7.bore gauge
8.p-dial varniar
9.spirit level
10 steel rules
11. Right angle
12 Profile gauge
13.welding gauge
14.Pitch gauge
15. Radius Gauge
16.Thread Gauge
17.Ring Gague
18.Plug Gauge
19.Hi-low Gauge
20.Surface Plates
21.Fillet Gauge
22.AWS Gauge
23.Textile  Varniar
24.Popet Dial.
25.Sleep Gauge

• Delivers AC for surface
  
• HWDC for subsurface flaw detection
  
• Handy
  
• Light Weight
  
• Safe for operator
  
• Lifting capacity 27 kgs in DC, 5 kgs in AC mode. Portable MPI Units
  The portable MPI units offered by us are intricately designed for continuous operation and efficiently yields accurate results. Based on latest technology, our units are available in various models. Some of the technical specifications of our range encompass of the following:
  
  Specifications of portable MPI units:
  
  
  • Models available: 1000, 1500 & 2000 Amps rating
    
  • Current outputs: AC and HWDC
    
  • Heavy duty cycle: 2 min. ON & 2 min. Off
    
  • Auto AC Decay Demagnetization Facility
    
  • Input Voltage: 230 V / 415 V
    
  • Thyristorise step less solid-state control
• Our immense industrial expertise and sophisticated machinery aid us in manufacturing and exporting an exclusive array of magnetic particle testing accessories. These are stringently checked by our team of quality controllers and are available in customized ranges. Below  Mention All magnetic particle testing (NDT) accessories.
  
  Our range of magnetic particles accessories bears the following varieties:
  
  
  • Pie Gauge / Field Indicator: To establish adequacy and direction of Magnetic Field
    
  • Ketos Test Ring: To Evaluating sensitivity of Magnetic particles (as per ASTM E-1444 standards)
    
  • Yoke Test Bar: To find out surface and sub-surface defects with Yoke (As per ASTM standards)
    
  • MPI Powders: Dry & Wet methods MPI Powders
    
  • Gauss Meter / Residual Fields Indicator: To Indicate Residual Magnetism in the job
    
  • UV light low intensity & high intensity black light
    
  • Puffer Bulb: To apply Dry Method powders on job surface
    
  • UV Meter/Lux Meter: To Measure UV Bulb & White Light Intensity

●

Pocket-size & economically price

●

Large measuring range suitable for most materials

●

Measures flat, outer cylinder and sloping surface

●

Both Ra and Rz parameters in one instrument

●

Features external calibration at keyboard

●

Standard conform to ISO and DIN

●

Rechargeable batteries, work while charging