Sandstorm Equipment Corporation

Standard Cabinet type Blaster are used for blasting of small components which can be loaded into the chamber and blasted manually by the operator standing outside the cabinet with the use of hand holes and view glass.

Sandstorm suction cabinets cost less and are simpler than pressure cabinets. They also blast continuously without the need to stop for media re-fills. The blasting velocity is much lesser when compared to a pressure system although production rates are not so high. When initial cost and maintenance are primary concerns, the suction system is a good choice. They come in the following models

Tumble Blast systems are usually used in the blasting of small components which are loaded into the tumbler in batch quantities while the components are tumbling the blasting goes on simultaneously through nozzles which results in the complete coverage of the components. The Tumbler can be of a belt tumbler, tumble basket or a drum type tumbler. Only the loading is done manually and the rest of the operation is automatic, these are basically special purpose machines designed as per customer requirements.

Sandstorm Pressure Cabinets are used for cleaning tough jobs, pressure blasting delivers higher abrasive Velocity for faster impact and intensity, when compared to suction blasting, and can increase your production rate 3 times.

Sandstorm wet blast cabinet has the ability to use very fine abrasive-as fine as 5 micron. Fine abrasive particles are mixed in water and then pumped to a nozzle as slurry, the slurry is introduced to compressed air in the blast gun and the wet blasting takes place on the job. The glandless slurry pump is used to feed the slurry at positive pressure into the blast gun. The pump is corrosion resistance. Wet blast cabinets are used for de-bering intersecting holes in precision parts which are inaccessible by any other method. The finest machined surface can be super finished without damage to sharp edges and exact tolerances and for degreasing and finishing of various aero and automobile components.

Blast rooms are large blasting enclosures designed to handle work too large even for the biggest size job. A blast room contains both the work piece and the operator. A dust collection system provides visibility; recovery floor sections convey the spent abrasive to an abrasive cleaning system which returns only good abrasive to the blast machine.

The following are common applications for blast rooms:

• Large Steel Fabrications or Members
• Military or Commercial Vehicles
• Aircraft
• Rail Cars
• Construction Equipment
• Anything else too big or which cannot fit in a hand cabinet

Sandstorm Portable Abrasive Blasting Machines are field proven, robust, user friendly and economical. Sandstorm P7 machines are of the best quality the machines are hydraulic tested to 250 PSI. The Sandstorm P7 machine come with an option of with or without remote control and dead man handle. All machines are fitted with Automatic filling valve pop- up valve

• Tungsten carbide venturi nozzle
  
• High quality blast hose
  
• Abrasive flow Control Valve
  
• Air Filter and Pressure Gauge
  
• Ball Valve