Nuclear Power Plant

The modular vacudap dose-/dose area product measuring system offers various ionization chambers and configurations   
for almost all medical diagnostic x-ray equipment in radiography, radioscopy,dental application or whole body scanners.
all complete systems have a serial interface rs 232 on the display unit for connecting a printer or transmitting data to a workstation or ris.
the vacudap systems are used for simultaneous dap (dose area product) and dap rate measurements according
to iec 60580.

Scintillation whole body counters (WBC) afre intended to measure ⁶⁰Co in lungs (AT1316A) and ¹³¹I, ¹³³I in the thyroid (AT1322, AT1322/1).

Features:

• Joint and separate using of AT1316A and AT1322 or AT1322/1
• High-speed check up 3 min for one person
• Automatic LED stablization of the energy scale
• Flexible program control of WBC functions, data base management and result reports
• Extended radioactivity measuring range: ¹³¹ from 30Bq and ¹³³ I from 40Bq - AT1322/1
• Compact design
  

Portable combined high-sensitive accurate instrument to measure ambient x-ray, gamma and neutron radiation close equivalent and dost equivalent rate, alpha and beta radiation flux density from contaminated surfaces and alpha and beta radiation surface activity and neutron radiation flux density.
Features:

• Multifunctionality
• High sensitivity and wide measuring ranges
• Fast response to radiation field change
  
• Alpha, beta, gamma, x-ray and neutron radiation source search
• Smart Probes (Rs232 interface)
• Built-in LED stablization system.
  

Unique high-sensitive instrument to control dose burden of crystalline lens, mucous membrances and skin. It measures directioanl dose equivalent rate H'(0,07) of continuous x-ray radiation with the energy from 5 keV.

Features:

• X-Ray and low-energy gamma radiation source search
• Fasst response to radiation background change
• Audible and visual alarm at threshold exceeding. 
• Large digital backlit LCD with analog scale
• Keeping up to 100 measurement results in the dosimeter nonvolatile memory
• Built-In LED stabilization system providing no need to use a reference source
• 256-channel ADC
• Logging and transfer to PC measurement results
• Dust and splash-proof case
• Three power types
  

The PC6 Pressure Calibrator combines the latest developments in
pressure instrumentation with advanced sensor and component technology to offer a versatile calibration instrument.
It is designed for accurately testing and calibrating the following types of instruments:
• Pressure Transducers / Transmitters
• Pressure Switches / Relief Valves
• Pressure Indicators (analogue / digital)
• Process Indicators
• Current / Voltage to Pressure Converters

OM21 micro-ohmmeter is used for four-wire resistance measurement of very low values (with a resolution of 0.1 W) up to 20 kW, with an excellent accuracy. It can be powered from mains or from rechargeable batteries. The instrument is calibrated electronically, with no internal adjustment needed.

OM16 milliohmmeter / microhmmeter is firstly a designed for outdoor uses instrument but also in workshop , and maintenance departments. Easy to use, it performs measurements on inductive and non-inductive resistances with a DC current.
Its large interactive display informs in real time the operator about the type of measurement, range, calculation conditions (resistance calculated according to a reference temperature), thresholds status and values.

The OM 10 micro-ohmmeter is used for four-wire resistance measurement from low values (resolution 10 μW) up to 50 kW, with an excellent accuracy. It includes thermal emfs compensation and temperature compensation. It can also measure DC and AC voltages and ambient temperature.

We offer wide variety of Micro-Ohmmeters to our clients. LOG OM IS the software tool to program and read data form AOIP micro ohmeters.T works with Windows 95, 98 XP and 2000 versions. It allows full configuration of the functions included in OM. Download and data reading of stored values.
Recorded value are displayed as list or curves, and exportation to spreadsheets is an included functionality. For OM22, it allows configuration of the 6 internal programs.

Applications:

• Automotive airbag inflator / module electrical functional tests.
  

• Seatbelt pre-tensioner actuator / module functional electrical check.
  

• High speed parralel soak dual inflator or dual test station electrical seek.
  

• High speed parallel soak dual inflator or dual test station electrical check.
  

• High speed parralel soak dual inflator.
  

• Multicontact / switch dry circuit continuity and leakage resistance measurements.
  

• Automotive power / fuse center continuity and leakage characterization.
  

• PCB / PWB and general purpose short/open circuits testing.

p { margin-bottom: 0.21cm; }

Applications:

• Combustion and incineration monitoring

• Basic Research

• Materials Research

• Measurement Oxygen Traces in pure gases

• Monitoring of atmospheres ( heat treatment, breathing, leak detection, etc).

• Fuel cell research

• High-Speed Detection & Shutdown                                    
• Elimination of False Positives
• Automated Response              
• Flexible, Modular “Plug & Play” Design                                    
• 24/7/365 Remote Monitoring Center                                        
• Broad Spectrum Sensing
• Easily Interfaces with virtually all Building                                                            
• Robust Design, Field-proven Technology                                                           
• SAFETY Act DT&E Designation 2006                                 
  
• FDNY Site Specific Approval for MEA 2007
• SAFETY Act Designation 2008
• Made in the U.S.A.

We offer X Ray machine 300 ma, which is used for routine radiographic and fluoroscopic diagnostic procedures of the chest, extremities, skull skeletal system, respiratory system, obstetric, pelvis, spinal column and gastrointestinal track and for special investigation including barium, IVP and HSG examinations.

Versions of the Proportional Detector

70 043A: for mobile application with shock absorption, waterproof
70 045A: with wall fixing for stationary application
70 046A: TRADOS – the portable device

Les analyseurs de traces d'oxygene jc15v - jc48v concur et fabriques par setnag, repondent aux demandes des producteurs de gaz industriels ainsi qu'aux exigences du traitement thermique. Lls integrent a technologie unique creee par setnag, la sonde zircone micropoast a reference interne metallique.

Since more than 50 years VacuTec has been developing and manufacturing Geiger-Mueller counter tubes in different versions and in top-standard glass technology. In the high-dose range and for detection of particle and low-energy X-radiation VacuTec can supply newly developed counter tube types with iron-chromium cathodes as miniature and endwindow tubes. With this wide
range of products we can offer the right counter tube for a multitude of applications.

Performance, reliability, ergonomics, and technology

ATKIF-2020 and 524N-2020 models have been specially engineered to comply with the requirements of all kinds of industries (large combustion plants, waste incinerators, steel plants, power plants, steam production etc.). The 574N-2020 is fit to be included in Continuous Emission Monitoring 5ytems to measure oxygen either in wet gases (connection at the heated hose outlet) uric dry gases (after the sample has been treated) The ATKIF-2020 is used to measure oxygen in wet gases right next to the process. No gas conditioning is required. The measurement is said tube "semi-in-situ" because the sensitive element is not in direct contact with the gases.
SETNAG have also developed a proven solution tor measuring oxygen in waste incinerator post-combustion processes.

This highly sensitive proportional detector family has been developed for the measurements of low level dose rates in the enviroment as well as for radiation caused by radioactive materials. The detectors are based on a large volume proportional counter tube (430 cm3) inclusive of electronics (high voltage generator, charge amplifier, discriminator, serial interface). The probes can be fitted to different applications and be used as well as portable device named trados and trados x.

They are comprised of air-filled parallel chambers with 1, 3 or 5 measuring fields, coupled with an amplifier and a field selector. The low overall thickness of 6 mm ensures the chamber may be used with all modern X-ray equipment.

We offer wide variety of Aerosol Sampler BOA-80. The BOA-80 sampler is intended for aerosol sampling from the air.
The volume of the air mass being sampled can be constant or proportional to the values available from external input – typically the air flow rate through the ventilation stack or pipeline.

The gen’air is used to generate and measure various oxygen atmospheres. It operates according to the zirconia ionic conduction principle.
                                                   
the gen’air is made in two parts:

the pump: using a low gas flow, between 1 conditions. And 13l/h, it raises or decrease concentration of oxygen in the gas that passes inside its zirconia tube.
                                                   
the gauge: it measures the partial pressure produced by the pump. Thanks to micropoas1 it gives a very accurate, very fast measurement.

Experience founded under the name of vakutronik, vacutec has been doing pio neering work in the development of ionizing radiation detectors for more than 50 years. Today, vacutec is an internationally active business with a staff of more than 40 highly qualified and motivated employees.

We offer wide range of radon scout.

Technical Data:

Measurement Range: 0 ... 10 MBq/m³
Sensitivity: 1.8 cpm @ 1000 Bq/m³ (independent on the humidity)
200 Bq/m³ with 20% statistical error (1σ) at 1 hour interval
1000 Bq/m³ with an statistical error (1σ) < 10 % at 1 hour interval
100 Bq/m³ with 17% statistical error (1σ) at 3 h interval
Response Time: 120 Minutes to 95% of the final value
Internal Sensors for: Relative humidity (0 .. 100%)
Temperature (-20 .. 40°C)
Tilt
Integration interval: 1 hour and 3 hours or customised
Storage: Non volatile, last 672 data records
Clock: Internal real time clock
Power supply: 2 x D-size cell (NiCd, NiMH or Alkaline)
Battery operation: > 90 days
Control: single switch, measurement/stand-by (lock-function)
Interface: RS232, USB

The continuous monitoring of the material thickness and basis weight respectively ensures complete recording of product quality and improves the efficiency of production control algorithms. The longitudinal and cross profiles of the material webs are available with 100% coverage immediately.

We offer wide variety of WEP Aerosol Collector. Zaromb Research Corp.'s Wet Electrostatic Precipitation-Based Aerosol Collector (ZRC's WEP) is able to collect both chemicals.
♦ Biological toxins (such as ricin) or microbes (Anthrax)
♦ Chemical warfare agents
♦ Virus particles
♦ Explosives
♦ Carcinogenic or other highly toxic air pollutants
♦ Lead-containing particulates
ZRC's WEP captures about 90% of 0.1- to 10-micron particles sampled at flow rates of at least 500 L/minute.
ZRC's WEP Aerosol Collector can be used to quickly and efficiently capture lethal biological agents and other airborne threats and concentrate them into a tiny volume of liquid for their highly enhanced detection by appropriate sensors. The WEP Collector utilizes a novel technology to efficiently transfer small airborne particles into a small collection fluid volume.
ZRC's WEP collectors should find applications in helping protect military and other government personnel and in Homeland Defense, Treaty Verification, Domestic Preparedness, Demilitarization, Drugs and Explosives Detection missions. Civilian applications include monitoring hospitals, food processing, and the environment. Early ultra-sensitive detection of lethal viruses should help identify and quarantine infected persons and thereby facilitate pandemics control.

The Tri-Car samplers are intended for the sampling of airborne 3H and 14C.
V3H14C series contains a two channel differential sampler for different forms of 3H and 14C, one channel sampler for basic forms of 3H and 14C and separate samplers for only 3H or 14C.

Main Advantages:

• Easy, quick and safe replacement of mechanically resistant glass vials.
• Longer exposure time and higher sample humidity in comparison with liquid sorbents.
• Optional proportioal control of the sampling according to the flow rate in a ventilation stack. Enables correct calculation of the releases and exposure of the public.
  

The VOPV-10 High-volume air sampler is intended for air sampling. It can be used for the sampling and follow-up measurement and evaluation of radioactive pollutants, dust, and other compunds in contaminated air.

Main advantages:

• Blower allowing high volumes of air to be sampled in a short time
• Possibility of continuous operation and both indoor and outdoor use.
  
• Low power consumption, long lifetime, high reliability, low maintenance costs
• Programmable sampling intervals
• Regulation  of the moter power according to the pressure difference on the filter allowing the flow rate to be constant no matter what the pollution of the filter is
  
• Easy information display (air sampled, flow rate, time of sampling, air parameters, unit status, etc.) and easy control
  
• Optional display of data and control of the unit remotely from a host system.
  
• Sophisticated features like protection of the motor against overload, automatic re-start after power supply failure etc.
  

PRODUCT SPECIFICITY :

•  Unlike most rival analysers, the ATK/F-2020 analysers do not require any air reference (thanks to the MicroPoas). The installation of the system is therefore easier and faster.
   Advantages for the customer: time saving for the set-up, less parts to deal with for the maintenance (eg.: no flowmeter required for the control of the air reference flow)

•   The ATK probes have been designed with the aim of making maintenance as easy as possible. Only mechanical parts (inner and outer probe tubes) are in direct contact with the combustion gases, they can easily be changed (« detachable » probes). The operator has an easy access to the sensitive element, without taking the probe off the stack, in contrast to in situ sytems in which the sensitive element is at the tip of the probe tube.

Vacutec messtechnik gmbh has been producing high quality ionization chambers for industrial applications for more
than 50 years. Ionization chambers of this type are mainly used in traversing measuring systems as sensors for radiometric thickness, area mass and density measurement applications. These measurements are based on the transmission or backscatter principle.

The DJ-500 desorption unit is used for (tritiated) water desorption which is trapped in sorbent (usually silica gel).
This allows follow-up analysis of the liquid sample using LSC method in the laboratory.

Main advantages:

• Possibility of re-use of silica gel for the sampling
• Unique combination of high temperature and negative pressure securing very high efficiency of desobtion.
  

Zaromb Research Corporation's Portable High-Throughput Liquid-Assisted Air Sampler (PHTLAAS) is designed for the rapid capture and detection of airborne chemical or biological hazards. The sampler utilizes proprietary technology to provide exceptional efficiency of collecting airborne pathogens into a small liquid volume.

The battery driven solution with blue tooth-technology avoids cable installation and provides a new level of flexibility in patient dose control.

vacudap bluetooth
 - avoids the expense for cable installation between dap meter and operating desk
 - assures complete functionality of the standard vacudap
 - displays dap and dap-rate simultaneously.

The VOPV-12 High-volume air sampler is intended for air sampling of very high volumes allowing for a follow-up air contamination measurement. It can be used for example for the sampling and evaluation of radioactive pollutants, dust, etc. in the contaimnated air.

Main Advantages:

• Powerful motor allowing very high volumes of air to be sampled in a very short time
• Possiblity of continuous operation and both indoor and outdoor use.
  
• Asynchronous motor bringing longer lifetime, higher reliability, lower maintenance costs
  
• Regulation of the motor power acording to the presure difference on the filter allwoing the flow rate to be constant no matter what the pollution of the filter is
• Easy information display (air sampled, flow rate, time of sampling, air parameters, unit status, etc) and easy control
• Optional display of data and control of the unit remotely from a host system
• Sophisticated features like protection of the motor against overload, automatic re-start after power supply failure etc
  

We provide wide range of Dose-gard (quick reference manual). p { margin-bottom: 0.21cm; }GA-ESI warrants to Purchaser that for a period of one yer after the date of shipment of a GA-ESI Dose-Gard to Purchaser, the Dose-gard will substantially conform to GA-ESI's published specifications for the dose-gard subject to the terms herein. Purchase shall notify GA_ESI of any nonconformance during the warranty period and obtain return instructions by calling GA-ESI at 1-800-854-2233. GA-ESI's exclusive obligation with respect to mnonconforming DOSE-Gard shall be, at GA_ESI's option and expense, to repair or replace such dose-gard so that it substantially conforms with its published specifications on the date of shipment, or, if GA-ESI, in GA-ESI's sole discretion, determines that it is not possible to repair or replace the dose-gard.

Features:

• Portable multifunctional wide-range instruments

• Short-term radiation (from 30 ms) and pulsed radiation from 10 ns (AT1123)

• Tisue-equivalent detector - scintillation plastic with heavy metal admixtures

• Gamma and beta radiation source search

• Ambient equivalent dose and dose rate measuring

• Exposure time assessment

• Built-in LED stabilization system of the measuring path providing no need to use a reference source

SARAD manufactures ion implanted silicon detectors for the
alpha/beta spectroscopy since 1994. SARAD detectors have
been approved for thousand times as OEM part or inside our
radiation detection equipment.
Key features are the robust design, low background and the outstanding spectroscopic performance even at low bias voltages. Only a 10 Volts bias is required to deposit the whole emission energy of an alpha particle (up to 10 MeV) within the depletion layer. The BS-types, especially designed for beta detection, provide a depleted region of 500 μm.
All types can be used under ambient conditions as well as in vacuum gauges. The entrance window is protected by an thin Aluminium layer with a thickness of 50 nm (V-type) or 500 nm (E-type). The thicker Aluminium of the E-type detectors make them especially suitable for ambient light applications.

The dualMCA is an Embedded Linux based high performance Multi Channel Analyzer (MCA). It connects to NIM ADC's from differnt manufacturers making those ADC's accessible over Ethernet (TCP/IP) and USB.

Due to the TCP/IP protocol used the dualMCA can be connected locally but also over the Intranet or Internet allowing an arbitrary distance between PC and detector.

The dualMCA also features external start stop inputs and a sample changer input and output (TTL).

The dualMCA not only offers PHA acquisition but also list and multi spectrum scaling modes. In list mode, the data includes a time stamp (0.53 μs timer resolution) which can be used to detect coincidences abetween serveral detectors when analyzing the data.

Features:

• User Friendly
• Compact
• Rugged
  
• Sensitive
• Cost-effective
• Reliable

System Options:

• Data Interface Kit Software / Infrared Apapter for recording and configuration.
  
• Various Dose-Gard Holders.
  

Unique Features:

• Full spectral data
• Built-in GPS receiver
  
• Audible and visual alarms
  
• Ultra compact
• Accepts multiple detectors - gamma and neutron
• Implements RSI's Advanced Digital Spectrometer (ADS) or Multi-Channel Analyzer (MCA)
• Individual ADS for each detector
• Vehicle or airborne use
• Stand-alone (no local computer required) operation with interal data memory
• RadAssist software for user control, monitoring and recording
  
• Includes mapping displays with navigational position & definable radiation overlays (both breadcrumb and contour)
• Nuclide Identification
• Composite material detector case provides improved efficiency for the lower energies
  

The ultraMCS is an ultra fast multiscaler module. It features a shortest dwell time of 25 ns, 256k channel memory and can be computer controlled using USB or Ethernet connectio. Analog output and digital I/O are available for experiment control.

• Ultra fast multiscaler
• Input count rate 400 Mhz and more
• Input signal threshold and impedance programmable
  
• Compatible with input signals in TTL, ECL or NIM Logic
• Dwell time in multiples of 1 μs
• up to 256k channels
• External start, external stop and external dwell available
• Digital I/O for experiment control
• Analog output (0-10 V) for experiment control
• No dead time between channels, no lost counts or double counting
  
• No end-of-sweep dead time in add mode for dwell times longer than 50 ns
• Multiple operation modes
  
• Ethernet and USB connection to the PC
• Operating software InterWinner / MCS
  

We offer wide range of Tritium online Analyzer (DTionix). The DT ionix analyzer, designed with CEA Valduc, is able to measure online and in real time the activity of Tritium in air, or other Beta gases (Kr85,Xe133, C14,...). Due to a large measurement range, an ultra high sensitivity and a dual ionization chamber, the DT ionix is the perfect tool for your applications of radioprotection, environment survey and process control.

This manual provides information on the dose-gard® dosimeter. The dose-gard® device is a microelectronic dosimeter that is used for personnel radiation monitoring. The dose-gard® will provide an alarm if the accumulated dose is higher than the dose alarm set point stored in the dose-gard®

The quad MCS is a fast four-input multiscaler module. It features 128k channels per input and can be computer controlled using USB or Ethernet connection. Analog output and digital I/O are available fro experiment control.

• For-fold independent multiscaler
  
• Input count rate 400 Mhz and more
• Input signal threshold and impedance programmable
• Compatible with input signals in TTL, ECL or NIm Logic
• Dwell time in multiples of 1 μs
• Up to 128K channels per input
  
• External start, external stop and external dwell available
  
• Digital I/Q for experiment control
  
• Analog output (0-10 V)  for experiment control
• No dead time between channels, no lost counts or double counting
  
• No end-of-sweep dead time in add mode
• Multiple operation modes
• Ethernet and USB connection to the PC.
• Operating softwrare InterWinner/MCS
  

Interwinner 7.0 is a universal nuclear spectroscopy anayytical program simultaneously controlling up to 32 inputs. InterWinner provides different analysis engines for Germanium, Nal, LaBr, and CZT based gamma spectroscopy as well as solid state Alpha spectroscopy. InterWinner is available in versions to support several or all of these detector types.

InterWinner controls all detector, amplifier, and ADC setup parameters as welll as data acquisition parameters and spectrum storage. InterWinner incorporates complete qualitative and quantitative analysis containing modules for all auxiliary data files necessary for thorough interpretation, research and sophisticated report generation. Through a multi-document based user interface, InterWinner offers the possibllity to display in multiple windows as many as 1024 different spectra and a unlimited number of regions of interest of any of the individual spectra. Spectra currently in acquistion or loaded from hard disk are shown and can be handled synchronous, while all the auxiliary data files (such as isotope tables) are handled in the same interface plus many can be loaded parallel.

In a large number of OEM applications, Alpha- and Beta radiation detection units are  equired which are providing high noise immunity, simple interfacing and small form factors.
The modules MOD-01/03 and MOD-01/04 offer a perfect solution for that. They combine a light-shielded, ion-implanted detector, a charge sensitive preamplifier and a shaping amplifier inside a rugged and small enclosure.Several detector sizes are available.

The RS-125 Spectrometer is the state-of-the art in portable hand-held radiation survey devices for the geophysical industry. It offers an integrated design with a large detector for survey or search, direct Assay readout, a Scan mode and data storage. It offers weather protection with ease of use. In addition, it has providing for wireless connection to a Bluetooth equipped external GPS receiver, earphone or computer.

The A2M4000 is the very first portable and battery powered instrument that combines various types of detectors and components for almost any measurement task in the field of radiation protection.
Definition of a local dose, detection of radioactive sources: The handy and robust NaJ(TI) detector is connected to the unit via a 10m long cable, so that it can be positioned flexibly in relation to the source. Thanks to the big detector volume, even small sources can be detected.
Net activity of free definable nuclides in food and material probes: The NaJ(TI) detector is also used to analyze food and material probes regarding specific nuclides (e.g. Iodine,
Caesium, Americium). By means of the gamma spectrum, the net activity of two user definable nuclides is automatically calculated. A lead shield against the environmental radiation is an optional accessory.
Measurement of radioactive aerosols in inhaled air: The aerosol sampling head with its spectroscopy filter and its silicon detector samples continuously and detects even small quantities of aerosol carried radioactivity. Both alpha and beta radiation are measured. The spectrometric analysis allows e.g. detecting Plutonium aerosols which cannot be detected by measuring gamma radiation.
Mop tests, surface contamination (clothes), electrochemical probes: Optionally, the A2M4000 can be connected to a portable vacuum chamber, to allow on-site analysis of mop
tests and other samples under circumstances similar to those prevailing in a laboratory. The employed vacuum pumps can be connected to a 12V source (car battery).
Toxic and explosive gases: Optionally, sensors to detect toxic and combustible gases (e.g. CO, CO2, CH4) can be integrated.
All detectors can be operated simultaneously. The concept of the system allows an easy handling and a standardized data basis. The device offers predefined measurement procedures that can be easily modified by the user. Additional measurement programs can be created without any problem.

We offer wide range of Radioactivity in air monitor.

The orion is the most adavanced digital signal processor developed by itech instruments. It is a 64k channel analyzer based with 100% digital signal processing. The orion features a 100 mhz 16 bit samplinjg adc, an internal linux computer, and internal high voltage bias suply all supporting pulse height analysis, list and peak shape data acquisiton.

the front panel of the orion includes a 3. 5" tft touch screen with autoranging display of peak counts and a calibrated horizontal axis displaying energy.

led's confirm serial or ethernet communication with a pc. Other led's confirm hv and warn of a system or detector problem.

Lonestar is a powerful and adaptable chemical monitor in a portable, self contained unit. Incorporating Owlstone’s proprietary FAIMS technology, the instrument offers the flexibility to provide both rapid alerts and detailed sample analysis. It can be trained to respond to a broad range of chemical scenarios and can be easily integrated with other sensors and third party systems to provide a complete monitoring solution. As a result, Lonestar is suitable for a broad variety of application ranging from online/at line process monitoring to lab based R&D.

A terrorist disguised as a landscape technician enters a large commercial building, hotel, or hospital with a 40 gallon remote plant watering dolly that has been modified so the tank is capable of holding a much higher pressure (ASME style tank) filled with Arsine (AsH3). The terrorist enters the center of the building, sets the timer of a small detonating device able to rupture the tank and leaves undetected before the attack unfolds.

The Chyem-ID is used for

• Field Testing
• Process Control
• Petroleum Refineries
• Criminal Investigations
• Laboratories
• Comparison Testing
• Aging Testing
  

Pro Analysis’ unique proprietary Argus technology has been developed in close cooperation with major Oil & Gas operators in the North Sea, as a response to the need for OiW monitor technology reliable over time under challenging process conditions. ProAnalysis introduced Argus to the Norwegian market in 2005, and is rapidly gaining acceptance as the leading supplier of OiW monitors in this market.

Argus Environment monitors Oil in Water (OiW) concentrations at water discharge to the environment, online and real time. Oil & Gas operators are given effective means to comply with HS&E regulations and reduce OIW levels without the need for manual water sampling and laboratory analysis.

The SMART 2000s analyzer is a fully computerized, NDIR gas analyzer and advanced optical opacity meter integrated into an automated and computerized engine emission analysis system, particularly suitable for diesel emissions. It is an accurate and repeatable system that complies to ISO standards, as well as to industry specific standards in Europe and North America. It is a portable and economical tool for automotive service stations, as well as for various field, laboratory, and environmental control or research applications.

The object of this quotation is to offer a dosimetry tool for low, medium, high absorbed dose measurements with high accuracy as well as a free radical analysis tool for radiation chemistry purposes and detection of irradiated food products.
The EPR Bench top Spectrometer is controlled by the Aer' EDE validated Software. Reading parameters and EPR Signal values are automatically read or saved into the dosimetry database for Calibration purposes and Dose calculations.

The Venus is a universal digital multichannel analyzer integrated into a photomultipler base. The Venus can be used in the most exacting spectroscopic applications as well as high rate, industrial counting applications. Because of our range of user selectable gain and time constant options, the Venus is easily adapted to all of today's choices of scintillator, including Nal, CsI and LaBr.

The Venus connects to your PC via USB. The USB bus supplies all communication and power requirements for the Venus.

Along with pulse height analysis, the Venus includes a time stamped list mode. Inthis mode, each event is storeed with the time of it's detection in clock units (15,625 ns) Up to 64 venus devices can be synchronized for coincidence counting. the Venus works with the InterWinner nuclear spectroscopy software.

With modern low cost digital electronics, InterWinner software and single cvable USB communication and pwer, the Venus is the ideal device for research and industrial laboratories, university teching and radiation safety applications, hospitals and other nuclear medicine applications and, of course single or multi-system homeland security functions.

Technical data:
Theory Of Operation:  Collection of the Radon daughter products at the surface of a filter by a continuous air flow permanent alpha spectroscopic analysis of the filter

Filter: 1.0 μm Membrane filter (PTFE)
Diameter 17.5 mm
1 month replacement interval under normal conditions

Pump: Membrane pump 0.18 Lpm
Sensitivity: approx. 150 cpm @ 1000 Bq/m3 (EEC)
Response time: 2 hours (to 90% of the final value)
Integration interval: 1.... 255 Minutes, adjustable in 1 Minute steps
Operation: Single push button with " lock " function
Display 3 x 12 characters, either US or SI units Acoustic alert
Memory: 377 records and sum spectrum, non-volatile
Interface: Infrared data link with special adapter for the USB-Port of the PC.
Power Supply: internal rechargeable battery approx. 48 hours continuous operation charging time approx. 2 hours.
Housing: rough aluminium enclosure with open sampling head
Dimensions 138 x 57 x 32 mm
Software: Radon Vision

Portable multifunctional scintillation gamma radiation spectrometers to search, detect and identify radionuclides, measure gamma radiation energy distribution, ambient gamma radiation dose equivalent rate H* (10) and alpha and beta radiation flux density.

Express monitoring and measuring of gamma radiaition radioactivity in a human body, dose evalatuion of internal irradiation.

Features:

• Stablized spectrometric path
• Spectrometric and radiometric measuring modes
• Effective algorighm of spectra processing by the maximum likelihood method
  
• Possiblility to extend radionuclides to control in the radiometric measuring mode
• Radionuclide identification
• Expected effective dose of internal irradiation calculation
• Flexible program control over whole body counter functions, data base management and result reports.
  
• Compact chair design
• Rapid background (phantom) spectra measuring using the generation function of operating spectra.

Application:

• People and sataff monitoring within and after radiation accident
• Dose burden control of internal irradiation from incorporated radionuclides
• Working in nuclear industry or with open radiation sources staff monitoring
  

Multipurpose high-accuracy wide-range x-ray and
gamma radiation dosimeter to measure kerma and
kerma rate in air.

Features:

• Calibration in kerma in air, abrorbed dose in air, absorbed dose in water, exposure dose and equivalent dose unit
• lonization chamber library in the non volatile memory
  
• Possiblity to extend the library with additional ionization chambers
• Built-in high-voltage power supply for ionization chambers output voltage +- (1-500)V, increment 1V
• Automatic measurement result correction considering air density for nonhermetic ionization chambers by input temperature and pressure values.
  

AT6101A - portable multifunctional scintillation gamma radiation spectrometer to measure gamma radiation energy distribution, evaluate gamma radioactivity of different source geometries chosen by user and perform other radiation monitoring tasks.

AT6101D - portable multifunctional scintillation gamma radiation spectrometer to measure gamma radiation energy distribution and evaluate effective specific activity of natural radionuclides in rocks, building materials and products and water without sampling.

High quality calibrations in radiotherapy and metrology.
p { margin-bottom: 0.21cm; }

Application:

• Lonizing radiation metrology

• Laboratories to research, adjust and serialize dosimetry instruments

• Metrology laboratories to calibrate and verify dosimetry instruments

• Second standard dosimetry laboratories (SSDLs)

p { margin-bottom: 0.21cm; }

High quality calibrations in radiotherapy and metrology

Features:

• Cooperation with gamma therapeutic devices such as AGAT-S, x-ray therapeutic apparatus, UPGD and their modifications

• Positioning simultaneously up to 2 ionization chambers or other dosimetry instruments on platform.

Standard dosimetric installations for gamma radiation are designed for verification, calibration and examination of ionization radiation measurement instruments in colimated field of gamma radiation.

The AMP01-03 combines a charge sensitive preamplifier and a pulse shaping amplifier in one small EMV resistant enclosure. ANy standard detector with Microdot (TM) connector can be screwed in directly. The shaping time constant of the Gaussian pulses is fixed for optimised performance. The output signal level fits perfectly to the input range of the SARAD SPECTRA 50xx spectrometer series. NIM signal levels requiring an additional linear amplification (Gain = 5).

The AMP01-03 can be used inside the SARAD Vacu Tube vacuum chamber as well as for in situ measurements in ambient air.

The connection to the spectrometer is realised by a single cable. Because of the low power consumption, the AMP01-03 is an ideal choice for battery powered systems and OEM applications.

If temperature/humidity as well as the Radon/Thoron signal have to be connected to a data acquisition system, the analogous outputs have to used for temperature and humidity. To log the Radon value use the digital output. The count rate of the transferred decay pulses is proportional to the Radon concentration. In this case the alert function is not available.

Easy to operate, pocket-sized microprocessor instruments with high accuracy and reliability. Together with the reader connected to PC it can be a part of automated monitoring system of staff dose burden.

Features:

• 
  Simultaneous wide-range gamma radiation dose and dose rate measuring
• Proof against impacts and vibrations, dust and water, electromagnetic-resistant
• Continuous self-testing of detector and cells discharge
  
• Audible and visual alarm
  
• Stand-alone or system application
• Pocket-sized and light weight
  
• Pulsed x-ray radiation alarming mode, pulse duration more than 10 ns

Applications:

• Nuclear industry
• Nuclear medicine Radiology NDT
• Emergency
• Civil Aviation
• Scientific research
• Population dose burden monitoring
  

Portable high sensitive radiation monitors intended to search and detect gamma radiation sources, measure ambient gamma radiation dose equivalent rate and alpha and beta radiation flux density from contaminated surfaces and estimate Cs specific activity in environment samples.

Features:

• Multifunctionality

• High sensitivity

• Fast response to radiation background changing

• Wide-temperature operation under field conditions (IP54)

• Built-in LED stablization system of the system of the measuring path providing no need to use a reference souce

Hand-held small-sized instruments to measure ambient x-ray and gamma radiation dose equivalent and dose equivalent rate and beta radiation flux density from contaminated surfaces.

Multifunctional small-sized scintillation spectrometers are used to detect, locate and identify gamma radiation radionucliedes, detect neutron radiation sources, measure gamma radiation energy distribution and ambient dose equivalent rate H*(10) and alpha and beta radiation flux density.

Features:

• Silicon flat detector

• No proper background

• Simultaneous dose burden measuring on the inward parts of the body Hp(10), skin and mucous membranes Hp(0.07) - AT3509B and AT3509C
  

• Compensative filter and electronic energy response correction by 4-channel analog processor
  

• Proof against the microphonic effect

• Self-testing mode

• Possibility to use separately or in a system

Product specificity:

• Unlike most rival analyzers, the ATK/F-2020 analyzers do not require any air reference (thanks to the micropoas). The installation of the system is therefore easier and faster.
  
• The ATK probes have been designed with the aim of making maintenance as easy as possible. Only mechanical parts (inner and outer probe tube) are in direct contact with the combustion gases, they can easily be changed (<< detachable >> probes). The operator has an easy access to the sensitive element, without taking the probe off the stack, in contrast to in situ systems in which the sensitive element is at the tip of the probe tube.  
• the ATK/F-2020 analyzers have the NF IE (instruments for the environment) certification, granted by acime as AMS (automated measurement systems for self supervision). The mcerts approval is outstanding.
  
• the micropoas being not sensitive to thermal shocks, it's life span is much longer than air reference sensor's. Air reference sensors are very likely to break during maintenance operations when taken out of an hot oven and put straight into the ambient air.
  

High sensitive wide-range selective spectrometric scintillation radioactivity monitors to measure volume and specific ¹³⁷Cs radioactivity in environmental targets and specific effective activity of natural radionuclies ⁴⁰K, ²³⁶Ra, ²³²Th in building materials and to perform metal radiation monitoring.

Features

• Spectrometric smart probe (Wilkinson MCA, 512 channels)
• Built-in continuous automatic LED stablization of the energy scal e and it's periodical calibration using a KCI check sample
• Background value keeping in the memory and its automatic subtraction
  
• Instrument spectrum processing using "energy windows"
• Spectrometric data output on a matrix in the nonvolatile memory
  

Technical Data:

• Theory of operation

1. HV biased measurement chamber with diffusion membran for air inlet
   
2. ELectrostatic collection of Radon daughters generated by Radon decay within the chamber on the surface of a semiconductor detector
3. Spectroscopic analysis of collected short living Radon daughter products.
   

• Measurement range 0.......... 4 MBq/m³
• Response time 12/120 Minutes to 95% of the final value
• Sensitivity 0.18/0.32 Counts/Minute @ 1000 Bq/m³ (fast/slow mode)
• Sample interval 1... 255 Minutes, adjustable by software
• Non volatile data memory to store 720 data records and sum spectrum
  
• Internal real time clock
• Internal rechargeable battery for 12 days permanent operation 2 hours recharge time
• Instrument control by a single push button, Optical and audible alert
• Displaying of concentration, exposure and dose (LCD< 3 lines x 12 characters)
• Dimensions 115 * 57 * 32 mm, weight 250 g
• Available with SI- or US- units
• Infrared interface, spesial IR - USB adapter is required
• Data transfer, set-up and instrument control by Radon Vision Software
• 
  

Due to an ultra high sensitivity, a good compactness and a long battery life, the β ionix is the perfect tool for your emergency units to detect tritium in air or other β gases (kr85,
xe133, c14,. . . ).
its full digital technology enables the control of two ionization chambers for a dual measurement (gamma compensation or
reference unit).
all the results are displayed in digital, graphic or bargraph mode thanks to a very intuitive and upgradable navigation menu.

The AMS 02 has been developed by BITT Technology and the Institute of Nuclear Techniques, Technical University of Budapest and includes the experience of more than 30 years. Among other things, the most important features are the reliable function also under
difficult conditions, as well as the possibility of a maintenance-free operating over months.

The instrument can be used for spectral gamma and neutron radiation scanning outdoors and indoors with GPS postitioning, carried by a person in a backpack or in a case.

Two-crystal scintillation spectrometer with protection on anticoincidence to measure simultaneously and selectively
specific Cs, Sr and K radioactivity in environmental
targets, evaluate specific effective activity of natural
radionuclides in buildings materials and perform metal
radiation monitoring.

Flexible and reliable multi-channel stationary radiation monitoring system to perform environmental and area radiation monitoring of radiation-sensitive rooms and targets

Features:

• 
  Gamma and neutron radiation smart probes
• Independent measuring in each channel within wide gamma and neutron radiation dose rate and neutron radiation flux density ranges
• Audible and visual alarm at threshold exceeding for each smart probe
• High reliability
• Failure diagnostics
• Database of dose rate values and alarm threshold excesses
• Applied software to display current radiation environment in real time
• Backup power unit
• Mobile one-channel design

Application:

• Nuclear Industry
• Radiology
• Industry
• Radioisotope and dosimetry laboratories
• Civil defense
  

This autonomous measuring station for our Gamma detector RS03/X permits measuring in an area where no infrastructure (telephone wiring and power supply) is available. The unit is equipped with a 12 V solar station to supply the measuring instruments with power. The integrated accumulator is designed for a station operation time of about 30 days without power production and full accu capacity. The data can be sent to a master station via GSM terminal modem. Consequently, the only requirement for the operation of this measuring station is the following:

Theory of operation replaceable scintillation chamber (Lucas cell)
Chamber Chamber volume: 80 ml, 160 ml or 240 ml
Connection to the PMT by thread M80 x 1,5
2 quick lock connectors for 6 mm tubes
PMT 72 mm (diameter) entrance window
Background < 0.01 counts/Minute (cpm)
Range 0 ... 10 MBq/m³
Sensitivity approx. 12 / 22 / 30 cpm @ 1000 Bq/m³ (80 / 160 / 240 ml)
Detection limits (MDA) 5 / 2 / 1 Bq/m² (80 / 160 / 240 ml chamber)
Response time (95%) 120 Minutes
Pump Membrane type approx. 0,25 L/min, manual switch

The Rs-120 Scintillometer is the state-of-the-art in portable hand-held radiation survey search device for the geophysical industry. It offers an integrated design with a large detector for high sensitivity, a direct survey readout, audio output, full weather protection, and ease of use.

Counter-terrorism experts within the DHS, CDC, and NIOSH are vexed by building vulnerability. An office building has a high concentration of human life encapsulated in a small space; an ideal target for today’s merciless terrorist. The experts repeatedly
identify the HVAC system as the most likely distribution point for a toxic attack. Authorities predict that a future attack against our country’s infrastructure will involve Toxic Industrial Chemicals or a Dirty Bomb because the material is so easy for a terrorist
to obtain, carry and disperse. These toxins can be easily released into a building’s outside fresh air intake, or into an interior return air intake on any floor. The lethal air will be distributed throughout the entire building via the HVAC system in just 3-5 minutes...
before anyone is aware that anything has happened. Death, serious injury, and enormous property damage will be the result...

The quadADC is an Embedded linux based high performance ADC and multi-channel analyzer. It connects to the 0-10  V upipolar signal coming from the main amplifier, analyzes the signal using a 1 μs sliding-scale ADC and stores the events in a pulse-height spectrum with up to 65536 channels.

The quadADC connects to the PC using Ethernet (TCP/IP) and USB. Due to the TCP/IP protocol used the quad ADC can be connected locally but also over the Intranet or Internet allowing an arbitrary distance between PC and detector.

A panel van painted with balloons and flowers pulls up next to a large commercial office building that has fresh air intake vents at the street level some 30 feet away from the panel van. The driver of the van opens the rear doors and removes six 150 cu- bic foot cylinders of Chlorine Gas that have been re- painted and labeled to resemble helium for balloons.

Critical facilities, buildings, and public gathering places are extraordinarily vulnerable to an airborne CBRN release or targeted terrorist attack. As pointed out in USACE Protecting Buildings and their Occupants from Airborne Hazards 2001, FEMA Risk Management series 459 2008, NYPD Security Engineering Guidance 2009, and other related reports, CBRN material introduced either internally or externally to a building or other venue will be rapidly circulated throughout the facility’s HVAC system killing and injuring personnel, ruining the facility asset, interrupting business continuity and prolonging recovery.

BPSI’s Chemical Sensor Array (CSA) is a key component to the Building Sentry One TM active detection system line. The CSA uses the mature Electro-Chemical technology sensors aligned in N+1 redundant configuration for detection of the most readily obtained mchemicals providing cross sensitivity to detect in excess of 38 additional chemical gasses. The CSA is enabled with an adjustable trigger point and is matched with proprietary firmware and software to eliminate false positives.

AMS02M-2008 is a special version of the AMS series of Bitt Technology. The AMS02 units are generally characterized as multi-detector equipment with an automatic sample changer.
The AMS02M-2008 is having one or two radiation detectors but manual sample changing.
By using the one detector system a PIPS detector is always inserted for the alpha and the beta (radon) measurement using a glass fibre filter.

We provide wide range of Dose-gard (quick reference manual). p { margin-bottom: 0.21cm; }GA-ESI warrants to Purchasers that for a period of one year after the date of shipment of a GA-ESI Dose Gard to purchaser, the DOSE-Gard will substantially conform to GA-ESI's published specifications for the Dose-gard subject to the terms herein. Purchaser shall notify GA-ESI of any nonconformance during the Warranty Period and obtain return instructions by calling GA-ESI.

The ERAC and the optional equipment was designed and built on the basis of a risk analysis and is under consideration of all relevant harmonized standards as well as further national standards and technical specifications. The system thus conforms to the current level of technology and guarantees the highest possible degree of safety.

Automation, efficiency and quality of calibrations and verifications in the field of x-ray and gamma radiation dosimetry

Flue gas analysers greenline 6000 and greenline 8000. AOIP portable flue gas analysers GreenLine 6000 & GreenLine 8000
represent the most powerful and advanced instruments on the market. The two units are designed using the new concept of split architecture. The gas analyser consists of two sections:
the gas analysis Main Control Unit (MCU) and the Remote Control Unit (RCU). The communication between the
two sections uses the industrial standard RS422.

The WebDL and the optional equipment was designed and built on the basis of a risk analysis and is under consideration of all relevant harmonized standards as well as further national standards and technical specifications. The system thus conforms to the current level of technology and guarantees the highest possible degree of safety.

Information on this data sheet Is subject to change without notice. For information to support licensing and commissioning of equipment, refer to contract specific documentation for data applicable to delivered equipment.

Applications:

• Activation of Magnet-pyrotechnics systems by current pulse with a programmable generator (current of non-fire, time / energy of activation...)
• Instrumented tests
• Performance tests
  

Exploder range
MF14 / MF24 / MF29 (embedded) / MF32 /MF35

A jihadist steals Cesium 137 from one of over 2,000,000 points of medical/industrial radiological sources in the US. With enough radioactive material to fill a cylinder, the terrorist packs the object into his briefcase along with some explosives equipped with a
simple timer. The terrorist, now fully exposed from handling the radiological material, continues on his quest to place the case in a central business district where the explosion will likely kill a few, but critically the plume cloud of deadly material generated by the explosion will be  it’s journey through the city on the winds at a pace of 10-15 miles per hour.

BPSI’s Radiation Area Detector (RAD) is a key component to all of the Building Sentry One TM active detection system lines. Based on mature technology, this single instrument combines a complete NaI Scintillation probe, reflector, photomultiplier tube, magnetic shield and high voltage generator to detect and  identify radiological isotopes in real-time (within 1-3 seconds). The RAD has rapid shut down capability in the event of isotope detection using multiple means to detect any radiological activity above normal background.

The two buttons, marked "M" and "S", below the dosimeter display (Figure 2.1) are used to operate the DOSE-GARD®. The button on the left is the MODE button "M" and the button on the right is the SET button "S".
The "M" button will toggle through the following modes: Normal Mode, Data Mode ("dAt"), Alarm Acknowledge ("AL-") Mode, Alarm Set Point Mode ("SPT"), Reset Mode ("RST"), Test Mode ("TES"), Serial Number Mode ("SER"), and Off Mode ("OFF").
The "S" button is used to enter the mode and execute its command.
See the section on each mode for detailed use of the two buttons.

 mass o2 [g/km], mass co2 [g/km], mass co [g/km], mass hc [g/km], mass nox [g/km], o2 [% vol. ], co2 [% vol. ], co [% vol. ], hc [ppm. ], ndir cell temp. [deg. C], exh. Gas temp. [deg. C], exh. Gas flow [cfm], ], average exh. Gas flow [cfm], average mass o2 [g/km], average mass co2 [g/km], average mass co [g/km], average mass hc [g/km], average mass nox [g/km], average fuel consumption[l/100 km], number of seconds from the beginning of the test [sec]. Data files have text format and can be imported to any standard data analysis software like microsoft excel.

The patented Clamp On DSP Corrosion-Erosion Monitor (CEM) has been designed to monitor the average wall thicknes of pipes, containers, and any large object that requires corrosion/erosion monitoring. The Clamp On
CEM system utilizesa a unique method of monitoring wall thickness loss by the use of clamp-on sensors. A number of transducers measure corrosion-erosion by transmitting ultrasonic signals that propagate through pipe matrial. Using ClampOn acoustic transducers means that no drilling or  welding that would cause loss of production is required.

The smart 1500 opacity analyzer is a fully computerized advanced optical opacity meter integrated       into   an   automated      and computerized diesel smoke emission analysis system. It is an accurate and repeatable system that complies to iso and sae j1167 standards, as well as with industry specific standards in europe and north america. It is a portable   and     economical   tool  for  garage inspection,    field, laboratory,   environmental control or research applications.

key features
1.    partial flow continuous smoke sampling
2.    light absorption principle, temperature
3. 99controlled
3.    vacuum based sampling system
4.    automatic zero and 50% span calibration.
5.    automatic free acceleration test to sae.
5.    j1667.
6.    cigarette plug / battery based rpm/oil t.
7.    100% us and canadian parts.

The DT ionix analyzer, designed with CEA Valduc, is able to measure online and in real time the activity of Tritium in air, or other Beta gases (Kr85, Xe133, C14.).
Due to a large measurement range, an ultra high sensitivity and a dual ionization chamber, the DT ionix is the perfect tool for your applications of radioprotection, environment survey and process control.
This quality is obtained by the complete expertise of our manufacturing process : ultra low current electronic device, feedthrough seals, ionizationchamber.

p { margin-bottom: 0.21cm; }

We offer Clampon Subsea  Cem Paper World Pipeline March. Corrosion and erosion in subsea installation can be detected by several methods. Pigable pipelines are normally inspected at regular intervals and tracking of pipeline integrity is generally not a big problemt. Some unpiggable pipelines can be inspected using cable operated tools, but such inspections are expensive and may require a shutdown of production. However, subsea production templateds, flow jumpers, manifolds and flowlines can only be inspected by pre-installation of corrosion/erosion sensors or by use of ROV-operated sensors.

 the smart 1504 analyzer is a fully computerized, ndir gas analyzer integrated into an automated and computerized engine emission analysis system. It is an accurate and repeatable  system that complies to iso standards, as well as to industry specific standards in europe an north america. It is a portable and economical tool for automotive service stations, as well as for
  various field, laboratory, and environmental control or research applications.

key benefits

• replaces manual sampling and laboratory analysis, eliminating /
•   minimising costs associated with such activities
• prevents significant oil discharges by means of immediate alarm when oiw levels exceed a defined limit
• is easy to install, no complex and expensive bypass loop required
• is maintenance-free*, compared to the high level of manual maintenance associated with traditional (bypass) oiw monitors
• facilitates remote monitoring of oiw (offshore or onshore), fully integrated with industry standard control systems

Lonestar is a powerful and adaptable chemical monitor in a portable, self contained unit. Incorporating owlstone’s proprietary faims technology, the instrument offers the flexibility to provide both rapid alerts and detailed sample analysis. It can be trained to respond to a broad range of chemical scenarios and can be easily integrated with other sensors and third party systems to provide a complete monitoring solution. As a result, lonestar is suitable for a broad variety of application ranging from online/at line process monitoring to lab based r&d.

The ClampOn subsea sensors are designed to meet these
requirements:
• Designed for a service life of more than 25 years
• Independent redundant electronics
• Independent high and atmosphere pressure chambers
• Electron beam (EB) welding of the chamber against external
pressure (no rubber or mechanical seals)
• Glass-metal penetrator

We are one of the eminent Exporter and Impoter of an extensive gamut of Radio Pharmaceuticals. Our strategic business associates include leading manufacturers, retailers and authentic market sources.

Proanalysis delivers unique technology for oil in water (oiw)
monitoring. The new argus® oiw monitors provide accurate and reliable oiw measurements, and are used for water discharge monitoring as well as produced water treatment process monitoring and management. The result is improved process performance, reduced operational costs and minimised discharges of hydrocarbons to the environment.

Due to an ultra high sensitivity, a good compactness and a long battery life, the β ionix is the perfect tool for your emergency units to detect Tritium in air or other β gases (Kr85,
Xe133, C14.). Its full digital technology enables the control of two ionization chambers for a dual measurement (gamma compensation or reference unit). All the results are displayed in digital, graphic or bargraph mode thanks to a very intuitive and upgradable navigation menu.

Benefits:

•  Large measurement range from 2500 Bq/m3 to 80 TBq/m3, choice of the units LPCA, LDCA or Bq/m3...(3 units among 15 possibilities).

•   Full digital technology very high accuracy, long term stability, ultra high sensitivity, fast response, dual measurement.

• Easy to use touch screen with intuitive menu, results displayed in digital and graphic mode, bargraph with alarm levels, data logging on 32 days.

•   Light and rugged 5 kgs, fo use under all operating conditions, all types of accessories available.

•   Modular and upgradable 100 cm3 or 1l ionization chamber, with or without reference unit, program update by Compact Flash,...

The clampon DSP Leak Monitor detects small and medium leaks or flow-throughs, even with low differential pressure over the measuring point on pipes and valves. The ClampOn DSP Leak Monitor has been developed with the aim of offering a product that can quantify a leak through a closed valve. The ClampOn DSP Leak Monitor is qualified as a subsea and topside monitor.

Any owner or operator of a factory would surely like to operate it as efficiently and profitably as possible. An oil or gas well can be regarded as a factory, and the ClampOn DSP-06 Particle Monitor gives operators the best tool for maximizing profits. ClampOn's DSP systems operate on thousands of wells every year, and the company is the world's largest supplier of sand monitoring systems. ClampOn is the natural choice for sand monitoring and management programs.

Vibrations always start at very high frequencies and change to lower frequencies as the conditions develop. The clampon dsp vibration monitor is an ideal instrument to monitor three directional vibrations on structures and pipelines with either high frequency shear waves or low frequencies. The system is designed with a broadband frequency response from 0 hz to  262 144 hz, suitable for early detection of vibrations in objects such as:
 

•   flow lines, jumpers
•   pumps, rotary machinery
•   subsea structures

 the smart 2000s analyzer is a fully computerized, ndir gas analyzer and advanced optical opacity meter integrated into an automated and computerized engine emission analysis smart 2000s system, particularly suitable for diesel emissions. It is an accurate and repeatable system that complies to iso standards, as well as to industry specific standards in europe and north
america. It is a portable and economical tool for automotive service stations, as well as for various field, laboratory, and environmental control or research applications.

The ClampOn DSP Well Collision Detector is designed to prevent collisions involving directional drilling within the proximity of existing wells. ClampOn DSP Well Collision Detectors provide operators with real time data so that collision risk analysis calculations are not the only factor determining the bit’s proximity to existing wells.

This method uses ClampOn noninvasive ultrasonic sensor technology in the form of a spectrum analyzer. The spectrum analyzer digitizes the ultrasound allowing frequency analysis in real???time. The procedure is patent pending. The process involves ClampOn DSP Well Collision Detectors being installed topside on all existing wells in close proximity to the well being drilled. The drill string’s approach to existing wells will
create an increase in the ultrasonic signal being observed topside. When dramatic ultrasonic increases are observed, drilling will be halted and data analyzed. After analysis is complete, the drill string can be diverted or drilling can resume with the confidence that a collision has been avoided
or that initial calculations were confirmed.

The use of directional drilling is only going to increase as fields mature. Proper collision avoidance techniques should be considered when preparing for the drilling operations. The ClampOn DSP Well Collision Detector provides the operator with an advanced real time collision monitoring system with
minimal equipment and personnel requirements.

Procedure Goals

• Prevent drill bit from colliding with existing well casing during directional drilling operations
  

• Give engineers physical proof of drill strings proximity to existing wells
  

•  Prevent environmental damages caused by collisions
  

• Help to increase safe drilling speed and decrease downtime caused by collisions

Installation

•  Easy non???invasive installation of hardware

• No hot work permit required

•  Intrinsically safe sensors

• No need for production shut???down to install

•  Minimal impact to daily operations on the platform
  

• Mounted on conductor pipe

Why choose a Clamp ON DSP-06 Subsea Particle Monitor?

Sand production in Oil and Gas wells is one of the most challenging factors an operator faces during production. Going subsea, safety issues in conjunction with the need to produce as much as possible per well, makes the selectio of a subsea monitoring system even more important.

The ClampOn subsea sensors are designed to meet these requirements:

• Designed for a service life of more than 25 years
• Independent redundant electronics
• Independent high and atmosphere pressure chambers
• Electron beam (EB) welding of the chamber against external presure (no rubber or mechanical seals)
• Glass-metalo penetrator as a barrler between high and atmosphere pressure high and atmosphere pressure chambers
  
• Outstanding sensitivity, repeatability, accuracy and signal/noise ratio thanks to Digital Signal Processing (DSP-06)

The history behind the ClampOn Subsea Systems started in 1996 in close collaboration with Shell Deepwater Development Inc. In Houston and FMC Technologies in Norway. the Successful outcome of the project was a suibsea sand monitoring system that combined an extremely long working life with excellent acoustic properties, offering reliability in the high-pressure deepwater environment. Since then, ClampOn has supplied close to 90% of the acoustic subsea sensors to the global market and its products are recognized as the Industryu standard in this field. Product development has been a continuous process for many years as we strive to enhance the performance of our subsea systems in order to meet new requirements and offer the market the very best technology.

The latest development to be incorporated in our systems is the DSP-06 filtering technique that represents a huge leap in technology ahead of alternative solutions.
If safety issues, profitable production, service life and system performance matter, then the clampOn DSP-06 SubSea Particle Monitor is your natural choice!

Principle of Operation:
The ClampOn DSP-06 Subsea Particle Monitor is based on the ClampOn "Ultrasonic Intelligent Sensor" technology. The sensor is Installed two pipe diameters after a bend, where the particles/solids impact the inside of the pipe wall, generating an ultrasonic pulse. The ultrasonic signal is transmitted through the pipe wall and picked up by the acoustic subsea sensor. In the patented "intelligent" ClampOn sensor the signal is processed internally by a DSP engine and filtered before being sent digitally and/or analogically to the topside computer or control system (no Calculating Interface Unit required). Here the user can monitor and evaluate the data in real time and make the required decisions for profitable production.

What Advantages does the DSP-06 offer?

Sand production in oil and gas wells is a serious issue for oil and gas producers.The challenge is not merely to avoid sand
production, but also to increase commercial well productivity, as even small quantities of particles in the well flow can cause significant damage. As an operator you are interested in maximum production and profit from your wells, no matter what technology you use. Operators all over the world have made ClampOn their preferred supplier of sand monitoring systems, due tothe patented technology that turns their wells into profit generators.

A Pig Detector is a tool that is always used in pigging operations. This operation is part of the operator's pipeline integrity management programme aimed at avoiding reduced capacity due to scale build-up or, in some cases, shut down due to leakage, corrosion, erosion, etc. Pigging is also performed in some cases to separate changes of media being transported in a pipe.

BlueBox is an interrogation system for optical fiber bragg grating (FBG) strain and temperature sensors. The sensor system measure changes of Bragg wavelength of optical fi ber Bragg grating (FBG) sensors over time.

The Polychromator based measurement guarantees exact simultaneous measurement times for all sensors in the wavelength-multiplexed assembly, with equal measurement duration of typically 100 μs. So, it is possible to reconstruct exact strain mode distributions from the momentary multi-point strain results.

The compact and robust unit is designated for use in harsh industrial environment, e.g., 20g impactr shock-proof, operating from -40° C, dustprotected.

The sensor software controls the spectral FBG sensor measurements, performs calculation of sensor values, as well as visualization and storage of the sensor measuring results on PC via Ethernet data interface.

Sensors Networks:

• Strain 1 μm/m to 5%
• Vibrations to 1 MHz
• Temperature -270 .. + 250°C
• Chemical Parameters (H2, pH, etc)
• Multiplex to > 100 measuring points
• embedded in compostie materials
• Tough operating conditions:
  

1. high voltage
2. electro-magnetic interference fields
3. explosive-environment
4. chemically-aggressive media
5. ionizing / nuclear radiation
6. very high / low temperatures

Applications:

• turbines, wind turbines
• aerospace
• railway engineering, cryogenics
• structures, geotechnical
  

• Accuracy up to 0,006%
• Light, Rugged, and Ergonomic for Field use
• Push & Lock, TC and 4 mm Industrial plug connection
• Dual Channels High Accuracy Thermometer
• Internal / External Pressure Modules
• Large Graphic Backlighted Display
• Simultaneous Measure and Simulation for TRX Calibration
• Real-Time Clock with Memory for In-field calibration Procedures ("as found" + "as left")
• ATEX Ex II 1G EEx ia IIC T4 (-20°C Tamb + 50°C) X
  

Specifications:
* 3-axis heterodyne interferometer for position measurement, Pitch and yawangle, triangulation
* Highly flexible calibration module for CNC-Calibration
* Dynamic measurements up to 4m/s
* Standard resolution 1nm (Position), 0, 01" (Angle)
* Accuracy < 50nm/m (by highly precision temperature sensors)
* For Notebook, PCI- und PXI-Bus compatible, Network-compatible

The ClampOn DSP Corrosion Erosion Monitor (CEM) is an ultrasonic instrument designed to measure wall thickness loss in pipes, plates or other metal structures. It uses active ultrasound where transducer pairs work in a pitch catch mode of operation, giving the average wall thickness between the transducers. As a part of the ClampOn family, it is not intrusive. A permanently installed CEM system will measure the wall thickness frequently and at a very high repeatability, thereby eliminating the weaknesses that are commonly encountered in manual ultrasonic thickness gauging. Wall thickness trends are generated automatically and can be observed in real time, logged internally in a datalogger or presented in a wireless solution. This technique has been installed topside and will now also be made available subsea.

Laser ZLM 900-3D
PXI-Version ZLM 900-3D
Optics ZLM 900-3D
The most efficient interferometer of its kind world-wide.

• 3-axis heterodyne interferometer for position measurement, Pitch and yawangle, triangulation
• Highly flexible calibration module for CNC-Calibration
• Dynamic measurements up to 4m/s
• Standard resolution 1nm (Position), 0,01" (Angle)
• Accuracy < 50nm/m (by highly precision temperature sensors)
• For Notebook, PCI- und PXI-Bus compatible, Network-compatible
  
• Quick adjustment, also in 3D
• Real-time measurements of all 3 axes
• Expandable up to 6 axes
• Small reflectors
  

Carbo::lyser^TM II / III

• scan plug & measure
• measuring principle: UV-Vis spectrometry
• multiparameter probe
• carbo::lyser^TM II monitors TSS & UV254 or TSS & COD or TSS & BOD or Turbidity & TOC or Turbidity & DOC
• carbo::lyser^TM III monitors TSS & UV254 & UV254t or TSS & COD & BOD or Turbidity & TOC & DOC or TSS & COD & CODf
• long term stable and maiontenance free in operation
  
• factory precalibrated
  
• automatic cleaning with compressed air
• mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
• operation via S::can terminals & s::can software
• automatic compensation of cross sensitivities
• ideal for surface water, ground water, drinking water and waste water
  

Every Factory owner or operator wants to operate to operate his plant as efficiently and profitably as possible. An oil or gas well can be regarded as s factory, and the clampOn Sandpit Monitor gives operators the best tool for maximising profits. Crampon's instruments are in operation on thousands of well every day, and the company is the world's largest supplier of sand monitoring systems.